DATOUBOSS 2000W 24V Pure Sine Wave Power Inverter User Manual

Introducció

This manual provides essential information for the safe and efficient operation of your DATOUBOSS 2000W 24V Pure Sine Wave Power Inverter. Please read these instructions carefully before installation and use. Keep this manual for future reference.

Precaucions de seguretat

• Assegureu-vos una ventilació adequada al voltant de l'inversor per evitar el sobreescalfament.
• No exposeu l'inversor a l'aigua, la pluja o la humitat excessiva.
• Avoid operating the inverter near flammable materials or gases.
• Connecteu l'inversor només a una font d'alimentació de 24 V CC.
• Always disconnect the power source before performing any maintenance or cleaning.
• No obriu l'inversor casing; no hi ha peces a l'interior que l'usuari pugui reparar.
• Mantenir fora de l'abast dels nens.

Producte acabatview

The DATOUBOSS 2000W 24V Pure Sine Wave Power Inverter converts 24V DC battery power to 230V AC household power, suitable for sensitive electronics. It features a continuous output of 2000W and a peak power of 4000W.

Característiques clau

• Sortida d'ona sinusoïdal pura: Provides clean, stable power suitable for sensitive electronics, reducing noise and energy consumption.
• Protecció integral: Includes protection against reverse connection, short circuit, undervoltage, sobrevaloraciótage, overheating, overload, and overcurrent.
• Ventilador de refrigeració intel·ligent: Activates automatically when the load exceeds 40% or internal temperature reaches 45°C, ensuring efficient heat dissipation and quiet operation.
• Construcció duradora: Alumini casing for enhanced heat dissipation.
• Capacitat de control remot: Allows for convenient power management from a distance.

Identificació de components

Figure 1: Inverter Front and Rear Panel Layout
This image illustrates the various ports and controls on the inverter. The front panel includes AC output sockets, USB and Type-C ports, an ON/OFF switch, and an LCD display. The rear panel shows the DC input terminals (positive and negative) and cooling fans.

• Preses de sortida de CA: Two EU standard AC 230V outlets for connecting appliances.
• Interfície USB: Per carregar dispositius alimentats per USB.
• Interfície tipus C: For charging Type-C powered devices.
• Interruptor ON / OFF: Main power switch for the inverter.
• Remote Switch Connection: Port for connecting the wired remote control.
• Pantalla LCD: Mostra el volum de sortidatage, power, and error codes.
• Terminals d'entrada de CC: Red for positive (+), Black for negative (-) connection to the 24V battery.
• Ventiladors de refrigeració: Two high-speed fans for thermal management.
• Terminal terrestre: Per a una connexió a terra segura.

Figure 2: Inverter Dimensions and Output Waveform
This image displays the physical dimensions of the inverter (approximately 32.6cm length, 20cm width, 7.9cm height) and a graphical representation of its pure sine wave output, indicating stable and efficient power delivery.

Figure 3: Intelligent Cooling System
This image highlights the inverter's dual high-speed cooling fans and intelligent chip control, which activate based on load and temperature to maintain optimal operating conditions and ensure quiet performance.

Instruccions de configuració

Follow these steps to properly set up your DATOUBOSS power inverter.

1. Triar una ubicació

• Place the inverter in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Ensure there is sufficient space around the inverter for proper airflow, especially around the cooling fans.
• Mount the inverter securely on a stable surface using the integrated mounting brackets.

2. Connecting to a 24V DC Power Source

1. Assegureu-vos que l'interruptor ON/OFF de l'inversor estigui en la posició "OFF".
2. Connect the red battery cable to the positive (+) terminal of your 24V battery bank.
3. Connect the other end of the red cable to the positive (+) DC input terminal on the inverter.
4. Connect the black battery cable to the negative (-) terminal of your 24V battery bank.
5. Connect the other end of the black cable to the negative (-) DC input terminal on the inverter.
6. Ensure all connections are tight and secure to prevent loose connections and sparking.
7. Connect the ground terminal of the inverter to a proper earth ground.

Important: Always connect the positive (+) terminals first, then the negative (-) terminals. When disconnecting, disconnect the negative (-) terminals first.

3. Connecting the Remote Control (Optional)

• If using the remote control, plug its cable into the "Remote Switch Connection" port on the inverter.

Figura 4: Components inclosos
This image shows the items typically included with the inverter: the inverter unit, battery connection cables (red and black), and a remote control unit with its cable. A user manual is also included.

Instruccions de funcionament

1. Engegada de l'inversor

1. After ensuring all DC connections are secure, switch the inverter's ON/OFF switch to the "ON" position.
2. The LCD display will illuminate, showing the output voltage i poder.
3. The cooling fans may briefly spin up during startup.

2. Connecting AC Appliances

• Plug your 230V AC appliances into the AC output sockets on the inverter.
• Assegureu-vos el wat totaltagLa potència nominal de tots els aparells connectats no supera la potència nominal contínua de l'inversor (2000 W).
• For inductive loads (e.g., motors, refrigerators), consider their startup surge power, which can be several times their running wattage.

3. Using USB and Type-C Ports

• Connect your USB or Type-C compatible devices to the respective ports for charging.

4. Apagada de l'inversor

1. Disconnect all AC appliances from the inverter.
2. Switch the inverter's ON/OFF switch to the "OFF" position.

Figure 5: Inverter in an Outdoor Application
This image demonstrates the inverter being used outdoors to power a laptop, highlighting its portability and utility for various scenarios like camping or remote work.

Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre inversor.

Neteja

• Periodically clean the exterior of the inverter with a soft, dry cloth.
• Ensure the cooling vents and fans are free from dust and debris. Use compressed air if necessary to clear blockages.
• No utilitzeu netejadors líquids ni dissolvents.

Inspecció de connexió

• Regularly check all DC and AC connections for tightness and signs of corrosion.
• Loose connections can cause overheating and damage to the inverter or battery.

Emmagatzematge

• When not in use for extended periods, store the inverter in a cool, dry place.
• Ensure the battery connected to the inverter is properly maintained and charged according to its manufacturer's instructions.

Resolució de problemes

This section addresses common issues you might encounter with your inverter. The inverter is equipped with multiple protection functions, and an alarm will sound with an LED flashing to indicate a protection state.

Figure 6: Inverter Protection Features
This diagram illustrates the internal components and various protection mechanisms of the inverter, including reverse polarity, over-temperature, overload, over-voltage, baix voltage, i protecció contra curtcircuits.

Especificacions

Informació de la garantia

This product is typically covered by a return policy that allows for refund or replacement within 30 days of purchase, as per standard retail terms. For specific warranty details, including duration and coverage, please refer to the documentation provided with your purchase or contact the seller directly.

Conserva el comprovant de compra per a qualsevol reclamació de garantia.

Atenció al client

If you encounter any issues or have questions regarding the DATOUBOSS 2000W 24V Pure Sine Wave Power Inverter that are not covered in this manual, please contact the seller or manufacturer for assistance.

Venedor: Henan Zhongri New Energy Co., Ltd.