Introducció
This instruction manual provides important information for the proper setup, operation, and maintenance of your NOVA CH-2200 Cup Holder. Please read this manual thoroughly before installation and use to ensure safe and effective functionality. This cup holder is designed to provide a convenient way to keep beverages accessible on walkers and rollators with round narrow tubing.
Producte acabatview
The NOVA CH-2200 Cup Holder is constructed from high-strength plastic and features an adjustable mounting system to accommodate various tube diameters on mobility aids.
Image 1: The NOVA CH-2200 Cup Holder securely attached to the frame of a rollator, holding a blue insulated cup. This image demonstrates the product in use on a mobility device.
Image 2: The NOVA CH-2200 Cup Holder mounted on the side frame of a standard walker, holding a blue insulated cup. This image illustrates the cup holder's compatibility with different types of walkers.
Configuració i instal·lació
The NOVA CH-2200 Cup Holder is designed for easy installation. Follow these steps to attach it to your walker or rollator:
- Identify Tubing Size: Determine the diameter of the round tubing on your mobility device where you intend to install the cup holder.
- For 5/8" to 3/4" tubing: Use the included rubber mat for a secure fit.
- For 7/8" to 1" tubing: Do not use the rubber mat.
- Col·loca el Clamp: Place the cup holder's clamp mechanism around the chosen section of the tubing. Ensure the cup holder is oriented in a way that allows easy access and does not obstruct the operation or folding of your device.
- Insert Rubber Mat (if applicable): If your tubing is 5/8" to 3/4", insert the rubber mat between the clamp and the tubing to ensure a snug fit.
- Estrenyeu el cargol: Assegureu-vos el clamp by tightening the adjustment screw until the cup holder is firmly attached and does not rotate or slide. Do not overtighten.
- Estabilitat de prova: Gently tug on the cup holder to ensure it is stable and will not detach during use.
Nota important de seguretat:
- Ensure the cup holder is securely fastened before placing any beverage in it.
- Do not attach the cup holder to moving parts or areas that interfere with the safe operation of your mobility device.
Instruccions de funcionament
Using your NOVA CH-2200 Cup Holder is straightforward:
- Place Beverage: Insert your standard-sized water bottle or soda can into the cup holder.
- Ajust segur: Ensure the beverage is seated properly and securely within the holder.
- Transport: The cup holder will keep your drink accessible while you use your walker or rollator.
Precaucions de seguretat:
- This cup holder is designed for cold or room temperature beverages only. Do not use with hot liquids such as coffee or tea, as this may pose a burn risk or damage the product.
- Avoid placing oversized or excessively heavy containers in the cup holder, as this may affect the stability of your mobility device.
- Regularly check the tightness of the mounting screw to ensure the cup holder remains secure.
Manteniment
To ensure the longevity and proper function of your cup holder:
- Neteja: Wipe the cup holder with a damp drap i sabó suau segons calgui. Eviteu productes de neteja abrasius.
- Inspecció: Periodically inspect the cup holder for any signs of wear, cracks, or damage. Ensure the mounting mechanism is intact and secure.
- Emmagatzematge: Emmagatzemar en un lloc fresc i sec quan no s'utilitzi durant períodes prolongats.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Cup holder is loose or slides. | Mounting screw is not tight enough, or incorrect use of rubber mat. | Tighten the mounting screw. Ensure the rubber mat is used for smaller tubing diameters (5/8" to 3/4") and removed for larger diameters (7/8" to 1"). |
| Beverage does not fit securely. | Beverage container is too large or too small for the holder. | Use standard-sized water bottles or soda cans. The holder is not designed for oversized cups or mugs. |
| Cup holder interferes with walker/rollator function. | Incorrect placement during installation. | Re-position the cup holder to an area that does not obstruct folding mechanisms, brakes, or user movement. |
Especificacions
- Model: CH-2200
- Marca: Nova
- Material: High-strength molded plastic
- Compatibilitat: Round tubing 5/8" to 1" diameter
- Dimensions: 4.2 x 3.9 x 3.6 polzades (Producte)
- Pes: 5.29 unces
- Ús previst: Cold or room temperature beverages only
Garantia i Suport
For warranty information or technical support, please refer to the official Nova Medical Products weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
Fabricant: Productes mèdics NOVA
ASIN: B0CYVBD3KT
