Hardoll 600W Solar Street Light Instruction Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your hardoll 600W All-in-One Solar Street Light. This solar-powered LED lamp is designed for outdoor use, featuring motion sensing, remote control, and a replaceable battery for efficient and reliable illumination in various settings such as homes, gardens, and streets.

Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• 1x Solar Street Light
• 1 x Lamp Arm & Bracket
• 1x comandament a distància
• 1x Remote Control Battery
• 1 x manual d'usuari
• Perns d'ancoratge
• Cargols i femelles hexagonals

Figura 1: Contingut del paquet inclòs

Instal·lació

Mounting the Solar Street Light

The hardoll 600W Solar Street Light is designed for flush mount installation on a pole or wall. Follow these steps for secure mounting:

1. Adjunta Lamp Braç: Connecteu de manera segura la lamp arm to the solar street light unit using the provided bolts and nuts.
2. Preparació de la superfície de muntatge: Drill appropriate holes in the desired mounting location (wall or pole) for the anchor bolts.
3. Suport de muntatge: Fixeu la lamp arm bracket to the prepared surface using the anchor bolts and hex nuts, ensuring it is stable and level.
4. Secure Light Unit: Slide the light unit with the attached arm onto the mounted bracket and secure it firmly with the remaining bolts and nuts.

Figura 2: Passos fàcils d'instal·lació

Optimal Solar Panel Placement

For maximum charging efficiency and performance, consider the following:

• Llum solar directa: Install the light in a location that receives 6-8 hours of direct sunlight daily.
• Eviteu l'ombra: Ensure no trees, buildings, or other obstructions shade the solar panel, especially during peak sunlight hours.
• Càrrec inicial: For optimal performance, it is recommended to place the lamp in direct sunlight for 2 days before its first use.
• Prova: To test the lights during the day, cover the solar panels with your hand or a non-transparent object.
• Street Light Interference: Avoid installing the light beneath utility or street lights, as the light falling on the solar panel can confuse the system, causing the lamp to remain off, mistakenly perceiving it as daytime.

Figure 3: General Tips for Solar Light Placement

Funcionament

Funcionalitat automàtica

The hardoll Solar Street Light is equipped with an automatic light sensor. It will automatically turn on when it becomes dark and turn off when it becomes light, conserving energy and ensuring illumination only when needed.

Funcions de control remot

Use the provided remote control to manage various settings and lighting modes:

Figura 4: Disposició i funcions del comandament a distància

• ON/OFF: Press to turn the light on or off manually.
• 100% brillantor: Sets the light to full brightness.
• 50% brillantor: Sets the light to half brightness.
• Augmenta/Disminueix la brillantor: Ajusta la intensitat de la llum.
• AUTO (Radar Mode for all Night): Activates motion sensor mode, where the light illuminates at full brightness upon detecting movement and dims when no motion is detected. This mode operates throughout the night.
• Mode d'il·luminació constant: Maintains a steady light output.
• Switch to Radar Mode after 2/3 Hrs Constant Lighting: Allows the light to operate in constant mode for a set duration (2 or 3 hours) before automatically switching to motion sensor (radar) mode.
• Reset Button (RST): For the first use or to change WiFi account, long press for more than 5 seconds (optional, if applicable to specific models).

Manteniment

Canvi de bateria

The hardoll 600W Solar Street Light features a replaceable 30000mAh 3.2V LiFePo4 battery. If the light's performance diminishes over time, the battery may need replacement. Consult the video below for detailed instructions on how to safely replace the battery.

Atenció General

• Panell solar net: Netegeu regularment la superfície del panell solar amb un drap suau iamp cloth to remove dust, dirt, and debris. A clean panel ensures optimal sunlight absorption and charging efficiency.
• Inspeccionar per danys: Periodically check the light fixture, mounting arm, and wiring for any signs of damage or wear. Address any issues promptly to maintain performance and safety.
• Protecció del medi ambient: The light is IP65 rated for water and dust resistance. However, extreme weather conditions may require additional inspection.

Resolució de problemes

If your hardoll Solar Street Light is not functioning as expected, please refer to the following common issues and solutions:

• El llum no s'encén a la nit:
  • Ensure the solar panel is receiving adequate direct sunlight (6-8 hours daily) and is not obstructed by shade.
  • Verify the light is not installed under another light source (e.g., street light) that might prevent its automatic activation.
  • Check if the remote control battery is functional and the light is not manually turned off.
  • Allow for initial charging (2 days in direct sunlight) if it's the first use.
• Light is dim or runs for a short duration:
  • Clean the solar panel surface to remove any dirt or dust that may be hindering charging.
  • Ensure the light is placed in an area with maximum direct sunlight exposure.
  • The battery may be aging and require replacement (refer to the Battery Replacement section).
• El comandament a distància no funciona:
  • Substituïu la bateria del comandament a distància.
  • Ensure there are no obstructions between the remote and the light's sensor.

Especificacions

Garantia i Suport

For warranty information, technical support, or any inquiries regarding your hardoll Solar Street Light, please contact Hardoll Enterprises LLP:

• Telèfon d'atenció al client: +91 9846 330 340
• Correu electrònic: support@hardollenterprises.com

Si us plau, conserveu el rebut de compra per a reclamacions de garantia.