1. Introducció
This manual provides essential information for the safe installation, operation, and maintenance of your Onforu 100W LED Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Informació de seguretat
AVÍS: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
- Ensure the power supply is turned off before attempting any installation, maintenance, or adjustment.
- Installation should be performed by a qualified electrician or a person with electrical knowledge.
- This product is designed for outdoor use and is IP65 waterproof rated. However, ensure all connections are properly sealed to maintain water resistance.
- Do not install near flammable materials or in areas with explosive atmospheres.
- No mireu directament a la font de llum LED quan estigui il·luminada, ja que podeu causar lesions oculars.
- Assegureu-vos que la superfície de muntatge pugui suportar el pes de l'aparell.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- LED Security Light Fixture (Model BDB100G-3)
- Maquinari de muntatge (cargols, femelles de cable)
- Manual d'instruccions
4. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | BDB100G-3 |
| Wattage | 100W |
| Brillantor | 9000 lúmens |
| Temperatura de color | 6000K (blanc llum del dia) |
| Voltage | 120 Volts |
| Angle del sensor de moviment | 180° |
| Interval de detecció de moviment | 16.4 ft - 72 ft (5m - 22m) |
| Lighting Time Adjustment | 10 segons - 7 minuts |
| Classificació de resistència a l'aigua | IP65 |
| Material | Die-cast Aluminum, Plastic |
| Dimensions (L x A x A) | 15.3" x 8.2" x 4.7" (38.8 cm x 20.8 cm x 11.9 cm) |
| Pes | 4.4 lliures (2 kg) |
| Tipus de muntatge | Muntatge a la paret i muntatge al sostre |
| Ideal Mounting Height | 10 ft - 16.4 ft (3m - 5m) |
5. Configuració i instal·lació
Before installation, ensure the power is OFF at the circuit breaker.
5.1 Components anteriorsview
Imatge 5.1: Desplegada view of the security light, highlighting the 100W LED beads and high-precision light transmission design.
5.2 Muntatge de l'aparell
- Prepareu la superfície de muntatge: Choose a suitable location, ideally between 10 ft and 16.4 ft (3m - 5m) from the ground, ensuring the motion sensor has an unobstructed view of the desired detection area.
- Col·loqueu el suport de muntatge: Secure the provided mounting bracket to the junction box using the included screws.
- Connexions de cablejat: Connect the household wiring to the fixture's wires. Typically, this involves:
- Negre (En directe) a Negre (En directe)
- Blanc (Neutre) a Blanc (Neutre)
- Green/Bare Copper (Ground) to Green (Ground)
- Assegureu el dispositiu: Carefully align the fixture with the mounting bracket and secure it in place. Ensure no wires are pinched.
Image 5.2: Installation diagram illustrating the steps to mount the security light to a wall or soffit.
Image 5.3: Detailed diagram showing the physical dimensions of the light heads and base, along with the standard three-wire electrical connections.
5.3 Adjusting Light Heads and Sensor
The three light heads can be adjusted independently to cover a wide area. The motion sensor can also be angled for optimal detection.
Image 5.4: The adjustable design allows for precise aiming of the light heads and motion sensor to cover a 270-degree detection zone.
6. Instruccions de funcionament
Once installed and power is restored, the light will enter a warm-up period (approximately 30-60 seconds) during which it may turn on and off. After this, it will operate according to the sensor settings.
6.1 Configuració del sensor de moviment
The motion sensor has three adjustable dials:
Image 6.1: The motion sensor features three adjustable dials for customizing detection parameters.
- DISTANCE (SENS): Adjusts the motion detection sensitivity and range from 16.4 ft to 72 ft. Turn clockwise for higher sensitivity/longer range, counter-clockwise for lower sensitivity/shorter range.
- HORA: Sets how long the light remains on after motion is detected, ranging from 10 seconds to 7 minutes. Turn clockwise for longer illumination, counter-clockwise for shorter.
- LUX (Day/Night Mode): Determina el nivell de llum ambiental al qual el sensor s'activa.
- Mode diürn (icona del sol): La detecció de moviment funciona tant de dia com de nit.
- Mode nocturn (icona de la lluna): La detecció de moviment només funciona a la nit o en condicions de poca llum.
6.2 Rendiment òptim
Image 6.2: The motion sensor provides versatile detection for areas like driveways, with a wide sensing angle.
Image 6.3: The light provides super bright and ultra-wide illumination, covering a significant area.
7. Manteniment
The Onforu security light is designed for minimal maintenance. Regular cleaning can help maintain optimal performance.
7.1 Neteja
- Ensure the power is OFF before cleaning.
- Netegeu l'aparell amb un drap suauamp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o la lent.
- Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.
7.2 Resistència a la intempèrie
Image 7.1: The IP65 waterproof rating ensures the light functions reliably in rain, sleet, snow, and sun.
8. Solució De Problemes
If you experience issues with your security light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense font d'alimentació. LUX setting is too low (Night Mode during daytime). Sensor de moviment obstruït o defectuós. | Comproveu el disjuntor i les connexions del cablejat. Adjust LUX dial to Day Mode (Sun icon) for testing. Clear any obstructions from the sensor. Ensure sensor is aimed correctly. |
| La llum es manté encesa contínuament. | Continuous motion in detection area. TIME setting is too long. Funcionament del sensor. | Ensure no constant movement (e.g., tree branches, pets) is triggering the sensor. Ajusteu el dial TIME a una durada més curta. Si el problema persisteix, contacteu amb l'atenció al client. |
| Light turns on too frequently or not enough. | DISTANCE (SENS) setting is too high/low. Sensor placement or angle is not optimal. Environmental factors (e.g., heat sources, reflective surfaces). | Adjust DISTANCE dial to desired sensitivity. Reposition or re-angle the sensor to cover the intended area and avoid unwanted triggers. Ensure the sensor is not pointed at direct heat sources or highly reflective surfaces. |
| La sortida de llum és tènue o inconsistent. | Fluctuació de potència. Damaged LED beads. | Ensure stable power supply. If individual LED beads are visibly not working, the unit may require replacement. |
| Fixture feels wobbly after installation. | Muntatge fluix. Main connection to base plate not fully secured. | Ensure all mounting screws are tightened. Verify the main light assembly is firmly attached to the base plate. |
9. Garantia
This Onforu product is covered by a Garantia limitada d'2 any from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
10. Atenció al client
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Onforu customer support through the retailer's platform or visit the official Onforu weblloc per obtenir informació de contacte.
Assistència en línia: Visita la botiga Onforu a Amazon