AMPBANK AB2000

AMPBANK AB2000 2000A Portable Jump Starter User Manual

Model: AB2000

1. Producte acabatview

El AMPBANK AB2000 is a powerful and portable jump starter designed to start 12V vehicles with up to 8.0L gasoline or 6.0L diesel engines. It also functions as a portable power bank and features an ultra-bright LED flashlight for emergency situations.

AMPBANK AB2000 Jump Starter with specifications for 12V, 8.0L Gas, 6.0L Diesel, and 2000A peak current.

Imatge: El/La AMPBANK AB2000 Portable Jump Starter, highlighting its 2000A peak current, compatibility with 12V vehicles, and capacity for up to 8.0L gas and 6.0L diesel engines.

2. Informació de seguretat

Llegiu i comprengueu sempre tota la informació de seguretat abans d'utilitzar aquest producte. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o lesions greus.

  • Keep the jump starter power above 50% for optimal starting efficiency.
  • No utilitzeu l'arrencador de botons si els cables o el clamps estan danyats.
  • Assegureu-vos de connectar la polaritat correcta (clavilla vermella)amp a positiu, negre clamp a negatiu).
  • Eviteu curtcircuitar el clamps.
  • Do not expose the device to water, rain, or extreme temperatures.
  • Mantenir fora de l'abast dels nens.
  • El AMPBANK jump starter incorporates 8 safety protections: anti-spark, anti-overcharge, anti-short circuit, anti-reverse connection, anti-surge, reverse polarity protection, over-discharge protection, and over-voltagprotecció.
AMPBANK AB2000 Jump Starter highlighting 8 built-in safety protections including reverse polarity, over discharge, short circuit, over voltage, spark proof, over current, reverse charge, and over temperature protection.

Imatge: Representació visual de la AMPBANK AB2000's 8 built-in safety protections, ensuring safe operation.

3. Què hi ha a la caixa

Desembaleu amb cura tots els articles i assegureu-vos que heu rebut el següent:

  • AMPBANK AB2000 Car Jump Starter (x1)
  • Jumper Cable with Smart Clamps (x1)
  • Cable de càrrega USB tipus C (x1)
  • Manual d'usuari (x1)
  • EVA Carrying Case (x1)
Continguts de la AMPBANK AB2000 package including the jump starter unit, battery clamps, Type-C charging cable, user manual, and EVA carrying case.

Image: All components included in the AMPBANK AB2000 package, neatly arranged.

4. Característiques i components del producte

Familiarize yourself with the key features and ports of your AMPBANK AB2000 jump starter:

  • Power Button/Battery Indicator: Displays current battery level and turns the device on/off.
  • Port d'arrencada ràpida: Es connecta als cables de pont intel·ligents.
  • USB Type-C Input/Output (PD18W): Per carregar l'arrencador i altres dispositius.
  • Sortida USB-A (5 V/3 A): For charging mobile phones, tablets, and other USB-powered devices.
  • DC Output (12-16.8V/10A): For powering 12V DC devices.
  • Llanterna LED: Provides illumination with multiple modes (stable, strobe, SOS).
AMPBANK AB2000 Jump Starter showing its various ports and LED flashlight.

Imatge: El/La AMPBANK AB2000 unit, showcasing its design and interface elements.

5. Càrrega de l'arrencador de bateria

Abans del primer ús, carregueu completament el AMPBANK AB2000. It is recommended to recharge the jump starter once every three months if not used for a long time to maintain battery health.

  1. Connect the provided USB Type-C charging cable to the Type-C input/output port on the jump starter.
  2. Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or car charger.
  3. The battery indicator lights will illuminate and flash during charging. All four lights will be solid when fully charged.

6. Instruccions d'ús: Arrencada d'un vehicle amb ajuda d'un cable

Ensure the jump starter has at least 50% charge before attempting to jump start a vehicle.

  1. Connecteu els cables de connexió: Insert the blue plug of the smart jumper cables into the jump start port on the AMPBANK AB2000. Ensure it is fully seated.
  2. Connectar a la bateria:
    • Adjunta el vermell positiu (+) clamp al terminal positiu (+) de la bateria del vehicle.
    • Adjunta el negre cl negatiu (-)amp al terminal negatiu (-) de la bateria del vehicle.

    L'intel·ligent clamp indicator light will show the connection status. A solid green light indicates a correct and ready connection.

  3. Inici del vehicle: Go into your vehicle and start the engine.
  4. Treure els cables: Once the vehicle starts, immediately remove the black negative (-) clamp from the vehicle battery, then remove the red positive (+) clamp. Finally, disconnect the smart jumper cables from the jump starter.

Using "BOOST" Mode for Completely Dead Batteries

If the vehicle battery is completely dead or has very low voltage, the standard jump start procedure might not work. In such cases, use the "BOOST" function:

  1. Follow steps 1 and 2 above to connect the jumper cables to the jump starter and the vehicle battery.
  2. Premeu i manteniu premut el botó "BOOST" del rellotge intel·ligent.amp for 3 seconds. The indicator light will turn solid green, indicating "BOOST" mode is active.
  3. Immediately start the vehicle within 30 seconds. If the car does not start, the "BOOST" mode will exit, and you will need to repeat the process.
  4. Once the vehicle starts, immediately remove the black negative (-) clamp, then the red positive (+) clamp, and finally disconnect the smart jumper cables from the jump starter.
AMPBANK AB2000 Jump Starter showing the 'BOOST' button on the smart clamp and instructions to use it for dead batteries.

Imatge: El/La AMPBANK AB2000 connected to a car battery, illustrating the "BOOST" mode button on the smart clamp for starting completely dead batteries.

7. Altres funcions

7.1 Banc d'energia portàtil

The AB2000 can charge various electronic devices:

  • USB Type-C (PD18W) & USB-A (5V/3A): Connect your mobile phone, tablet, or other USB-powered devices using their respective charging cables to the appropriate output ports.
  • DC Output (12-16.8V/10A): Use this port to power 12V DC devices, such as car vacuum cleaners or tire inflators (ensure compatibility).
AMPBANK AB2000 Jump Starter charging a smartphone and a tablet via its USB-A and USB Type-C ports, also showing a DC output port.

Imatge: El/La AMPBANK AB2000 functioning as a portable power bank, charging a smartphone and a tablet simultaneously.

7.2 Ultra-Bright LED Light

The built-in LED flashlight offers three modes for various situations:

  1. Per activar/desactivar: Press and hold the flashlight button for 3 seconds.
  2. Per canviar de mode: Short press the flashlight button to cycle through modes: Stable Light → Strobe Light → SOS Signal.
AMPBANK AB2000 Jump Starter with its LED flashlight illuminated, showing options for lighting, SOS, and strobe modes.

Imatge: El/La AMPBANK AB2000's high-power LED flashlight in use, demonstrating its utility for illumination and emergency signaling.

8. Manteniment

  • Recàrrega: If the jump starter is not used for a long time, it is recommended to recharge it once every three months to prolong battery life.
  • Neteja: Feu servir un drap suau i sec per netejar el dispositiu. No utilitzeu productes químics agressius ni materials abrasius.
  • Emmagatzematge: Store the jump starter in its EVA carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.

9. Solució De Problemes

ProblemaCausa possibleSolució
El vehicle no arrenca.La bateria de l'arrencador de botons està massa baixa.Ensure the jump starter has at least 50% charge. Recharge if necessary.
El vehicle no arrenca.Incorrect cable connection or dirty battery terminals.Comproveu que clamps are securely connected to the correct battery terminals. Clean battery terminals if corroded.
El vehicle no arrenca.Vehicle battery is completely dead.Use the "BOOST" mode as described in Section 6.
Smart clamp l'indicador lluminós és vermell o parpelleja.Error in connection (e.g., reverse polarity, short circuit).Desconnectar clamps and re-connect them correctly, ensuring red to positive and black to negative. Refer to safety information.
Jump starter not charging devices.Jump starter battery is low or device is incompatible.Check jump starter battery level. Ensure the device being charged is compatible with the output specifications.

10. Especificacions

CaracterísticaDetall
ModelAB2000
Corrent màxima2000A
Compatibilitat de vehicles12V vehicles, up to 8.0L Gas / 6.0L Diesel Engines
Capacitat de la bateria59.2 Amp Hores (ions de liti)
Entrada/sortida USB tipus CPD18W
Sortida USB-A5V/3A
Sortida de corrent continu12-16.8V/10A
Llanterna LED300 Lumen (Stable, Strobe, SOS modes)
Pes de l'article3.02 lliures
Dimensions del paquet10.83 x 6.34 x 4.25 polzades

11. Garantia i Suport

El AMPBANK AB2000 comes with a 1-year quality assurance warranty and a 30-day free refund period. Lifetime free technical support is also provided.

For any questions or support needs, please contact AMPBANK customer service.

© 2024 AMPBANK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.