Manual d'usuari de l'inflador de pneumàtics portàtil SYNCWIRE SW2002

1. Informació de seguretat

Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.

• Mantenir fora de l'abast dels nens.
• Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
• Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
• No deixeu l'inflador sense vigilància durant el funcionament.
• Avoid exposing the inflator to rain or moisture.
• Do not attempt to disassemble or modify the device. Contact customer support for assistance.
• Feu servir només el cable de càrrega i els accessoris proporcionats.
• Guardeu l'inflador en un lloc fresc i sec quan no l'utilitzeu.

2. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 1x SYNCWIRE SW2002 Portable Tire Inflator
• 1x Mànega d'aire
• 1x cable de càrrega USB-C
• 1x Bossa d'emmagatzematge
• 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
• 4x Car Tire Valve Caps
• 1x Manual d'usuari (Aquest document)
• 1x Warranty Policy

Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.

3. Producte acabatview

3.1 Característiques clau

• High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
• Pantalla LCD gran: Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
• Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
• Tancament automàtic: Automatically stops inflation once the preset pressure is reached.
• Múltiples modes d'inflació: 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
• Unitats versàtils: Supports PSI, KPA, BAR, and KG/CM².
• Llanterna LED integrada: Provides illumination for use in low-light conditions.
• Banc d'energia d'emergència: USB output port allows charging of mobile devices.
• Compacte i portàtil: Dissenyat per a un fàcil emmagatzematge i transport.

3.2 Disseny del dispositiu

Imatge: Frontal view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.

• Pantalla LCD: Shows current and target pressure, battery level, and selected mode.
• Botó de mode: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
• Botó d'encesa: Encén/apaga el dispositiu i inicia/atura el inflat.
• Botons +/-: Adjusts preset pressure values.
• Botó d'unitat: Changes pressure units (PSI, KPA, BAR, KG/CM²).
• Botó de llum LED: Activa/desactiva la llanterna integrada.
• Port de la mànega d'aire: Connects the air hose to the inflator.
• Entrada USB-C: Per carregar l'inflador.
• Sortida USB-A: Per utilitzar l'inflador com a bateria externa.

4. Configuració

4.1 Càrrega de l'inflador

1. Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
2. Connect the other end of the cable to a compatible USB power adapter (not included) or a USB port.
3. The battery indicator on the LCD display will flash during charging and become solid when fully charged.
4. A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.

4.2 Attaching the Air Hose and Nozzle

1. Screw the air hose securely into the air hose port on the top of the inflator.
2. Seleccioneu l'adaptador de boquilla adequat per a l'article que voleu inflar.
3. Screw the chosen nozzle adapter onto the free end of the air hose.

5. Instruccions de funcionament

5.1 Engegada/apagada

• Manteniu premut el botó Botó d'engegada for 3 seconds to turn the inflator on.
• The LCD display will light up, showing the current battery level and default mode.
• Per apagar, premeu i manteniu premut el botó Botó d'engegada for 3 seconds again, or the device will automatically shut off after a period of inactivity.

5.2 Selecting Inflation Mode and Unit

Image: The inflator's LCD screen displaying various preset inflation modes.

1. Després d'encendre, premeu el botó Botó de mode to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
2. Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
3. Premeu el botó Botó Unitat to switch between pressure units: PSI, KPA, BAR, KG/CM².

5.3 Configuració de la pressió desitjada

1. Once a mode is selected, the preset pressure value will flash on the LCD.
2. Utilitza el + i - buttons to adjust the desired target pressure.
3. Consulteu les recomanacions del fabricant del vostre vehicle o article per obtenir els valors de pressió correctes.

5.4 Inici i aturada de la inflació

Image: The inflator actively inflating a car tire, demonstrating its speed.

1. Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
2. Premeu el botó Botó d'engegada to start inflation. The real-time pressure will be displayed.
3. L'inflador s'aturarà automàticament un cop s'assoleixi la pressió preestablerta.
4. To manually stop inflation, press the Botó d'engegada de nou.
5. Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.

5.5 Ús de la llanterna LED

• Premeu el botó Botó de llum LED per encendre la llanterna.
• Press again to cycle through different light modes (e.g., steady, SOS, flashing).
• Press a third time to turn off the flashlight.

5.6 Funció de bateria externa

Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.

• Connect your device's charging cable to the USB-A output port on the inflator.
• The inflator will begin charging your device. This function is useful for emergencies.

6. Manteniment

6.1 Neteja

• Ensure the inflator is turned off and disconnected from any power source before cleaning.
• Netegeu l'exterior amb un suau, damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
• Keep the air intake and exhaust vents clear of dust and debris.

6.2 Emmagatzematge

• Store the inflator and its accessories in the provided storage bag.
• Mantingueu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• For prolonged storage, charge the inflator every 3-6 months to maintain battery health.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

SYNCWIRE provides a 36 mesos de garantia for the SW2002 Portable Tire Inflator.

For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.

Please refer to the included Warranty Policy document for detailed terms and conditions.