VSYSTO Q3 Motorcycle Dash Camera Instruction Manual

1. Producte acabatview

The VSYSTO Q3 is a WiFi-enabled motorcycle dash camera system designed for comprehensive recording of your rides. It features front and rear 1080P cameras with SONYIMX307 sensors, GPS tracking, parking monitoring, and a wired controller for easy operation. The system is fully waterproof, ensuring reliable performance in various weather conditions. This manual provides detailed instructions for installation, operation, and maintenance.

2. Què hi ha a la caixa

Desembaleu la caixa amb cura i assegureu-vos que tots els articles hi siguin presents i en bon estat. Si falta algun article o hi ha algun malmès, poseu-vos en contacte amb el servei d'atenció al client.

• Amfitrió amb claudàtor
• 2 càmeres (frontal i posterior)
• Mòdul GPS
• Cable d'alimentació
• Controlador per cable
• Cable USB
• Camera Extension Cables (2 meters / 6.5ft x2)
• GPS Extension Cable (2 meters / 6.5ft)
• Cable Fixing Accessories

Image: All components of the VSYSTO Q3 Motorcycle Dash Camera system.

3. Guia d'instal·lació

Proper installation is crucial for the optimal performance and longevity of your VSYSTO Q3 dash camera. Follow these steps carefully.

3.1 Connexió inicial i proves

1. Connect the wired controller, cameras, and GPS connector to the main host unit.
2. Use the provided USB test cable to connect the system to a 5V 2A charger or power bank for testing.
3. Verify that the system powers on and the wired controller functions correctly. If the wired controller vibrates abnormally, check the memory card and camera connections.

3.2 Instal·lació del suport de l'amfitrió

1. Attach the bracket pad to the host bracket.
2. Align the bracket with the bracket hole on the host unit.
3. Insert the screw through the bracket and into the host, then tighten securely with a wrench.
4. Use adhesive tape to secure the host unit inside the motorcycle, typically under the seat or in a storage compartment.

Image: Step-by-step guide for installing the host unit's bracket.

3.3 Camera Bracket Installation

1. Instal·leu l'anell de goma amortidor a la càmera.
2. Install the circular bracket onto the camera.
3. Col·loqueu la junta a la base del suport de la càmera.
4. Insert the metal sheet into the screw, put them through the bracket, cover the nut, and tighten with a wrench.
5. After installing the camera bracket, attach it to the appropriate position on the motorcycle using tape or screws.

Image: Step-by-step guide for installing the camera brackets.

3.4 Connexió del cable d'alimentació

The power cable has three wires: red, black, and yellow.

• Fil vermell: Connect to the positive pole of the motorcycle power supply.
• Fil negre: Connect to the negative pole.
• Fil groc: Connect to the ACC power of the motorcycle.

To find the ACC line, you can use the power cable module's blue light indicator. Connect the black and red wires to the battery. Then, connect the yellow wire to different potential ACC lines on the motorcycle. When the blue light on the power cable module turns on and off with the motorcycle's ignition key, you have found the correct ACC line.

Image: Diagram showing the power cable connections to the motorcycle battery and ACC line.

4. Instruccions de funcionament

4.1 Funcions del controlador amb cable

• Botó vermell (pressió curta): Records an emergency video. The motor will vibrate once, and the LED indicator will flash quickly.
• Botó vermell (pressió llarga): Resets the WiFi password.
• Blue Button (Long Press): Pauses vibration from the wired controller. This is useful if the controller vibrates due to a fault, allowing you to check the system.
• Indicador LED: Slow flashes indicate normal recording. Fast flashes indicate emergency video recording.

Imatge: Més deview of the wired controller and its various functions.

4.2 WiFi Connection and APP Usage

The VSYSTO Q3 features a WiFi signal enhancer for improved video download speeds. Use the dedicated mobile APP to manage your recordings.

1. Download the "WiFi Camera" APP from Google Play or the App Store.
2. Enceneu la gravadora.
3. On your phone, go to WiFi settings and connect to the WiFi network starting with "MOTODV" or "VSYSTO". Enter the default password (usually 12345678 or 88888888). Note: WiFi is an internal network; your phone may show "no network connection" which is normal. Some phones may require turning off mobile data before connecting to the dash cam's WiFi.
4. Open the "WiFi Camera" APP and click "Enter recorder" to view la imatge de la càmera en temps real.
5. In the APP, you can switch between front and rear camera views, manually record, or take pictures.
6. Feu clic a "En línia" per a view files stored on the memory card. You can delete or download video files from here. After downloading, videos can be played from the "Local" page or edited and shared within 30 seconds.
7. The "Settings" page allows you to configure loop video time (1/2/3/5 minutes), sound recording, G-sensor sensitivity (recommended Level 0 or 1), microphone sensitivity, reset camera, and other functions.

Important: When the phone is connected to WiFi, the recorder will stop recording, and the wired controller cannot be operated. If you need to view and record videos in real-time, please click the red "Record" button on the preview page. After you disconnect WiFi and exit the APP, the recorder automatically starts recording after 30 seconds.

Image: Visual guide for connecting the VSYSTO Q3 to your phone via WiFi.

5. Característiques clau

Càmeres frontal i posterior de 5.1 HD 1080P

Equipped with SONYIMX307 COMS sensors and 150° wide-angle lenses, both front and rear cameras record in 1080P resolution. Advanced WDR (Wide Dynamic Range) technology automatically adjusts brightness for clear, color-accurate video even in low-light conditions.

Image: Illustrates the 1080P dual cameras and their wide-angle coverage.

5.2 Seguiment GPS

The integrated GPS module records driving speed, longitude, and latitude. Driving tracks can be viewed on the mobile APP or a computer.

Image: Depicts the GPS tracking functionality, showing a motorcycle route on a map interface.

5.3 Monitorització d'aparcaments

When the motorcycle is parked and the ignition is off, the recorder detects vibrations. If a shake is detected, it automatically turns on and records for 30 seconds before turning off. This feature can be enabled or disabled via the APP settings. Note: This function requires hard-wired installation and a battery voltagi no inferior a 11.8V.

Image: Illustration of the parking monitoring feature, showing automatic recording upon vibration detection.

5.4 Full Body Waterproof Design

Both the host unit and cameras are designed to be fully waterproof, ensuring stable operation in rainy or dusty conditions.

Image: Demonstrates the waterproof capabilities of the VSYSTO Q3 dash camera system.

5.5 Seamless Loop Recording and G-Sensor

The system supports seamless loop recording, allowing you to choose video lengths of 1, 2, 3, or 5 minutes. When the SD card is full, new videos will automatically overwrite the oldest recordings. The built-in G-sensor detects collisions and automatically locks the current video to prevent it from being overwritten, providing crucial accident proof.

Image: Shows the emergency recording function, where the G-sensor locks video footage durant un impacte.

6. Manteniment

• Manteniment de la targeta SD: Regularly format the SD card (at least once a month) to ensure optimal performance and prevent data corruption. Use a high-quality, high-speed SD card (up to 256GB).
• Neteja: Use a soft, dry cloth to clean the camera lenses and host unit. Avoid abrasive cleaners or solvents.
• Actualitzacions de firmware: Consulteu el lloc web oficial de VSYSTO website or APP for any available firmware updates to ensure your device has the latest features and bug fixes.
• Inspecció del cable: Periodically inspect all cables for any signs of wear, damage, or loose connections.

7. Solució De Problemes

If you encounter any issues with your VSYSTO Q3 dash camera, refer to the following common troubleshooting steps:

• El dispositiu no s'encén: Check all power connections, including the battery terminals and ACC line. Ensure the motorcycle's ignition is on if connected to ACC.
• Wired controller vibrates abnormally: This indicates a potential fault. Check if the memory card is properly inserted and if both cameras are connected correctly. Long press the blue button on the wired controller to pause the vibration while you investigate.
• Slow WiFi download speeds: Ensure your video loop recording setting is set to a shorter duration (e.g., 1 to 3 minutes) for faster downloads.
• Sense gravació de vídeo: Verify that an SD card is inserted and properly formatted. Check camera connections.
• Poca qualitat de vídeo: Ensure camera lenses are clean. Check APP settings for resolution and WDR options.
• Problemes de connexió amb l'APP: Ensure your phone's WiFi is connected to the dash cam's network and mobile data is temporarily disabled. Try resetting the dash cam's WiFi password by long-pressing the red button on the wired controller.

For further assistance, please contact VSYSTO customer support.

8. Especificacions

9. Garantia i Suport

The VSYSTO Q3 Motorcycle Dash Camera comes with a 1 anys de garantia des de la data de compra. Aquesta garantia cobreix defectes de fabricació i avaries en condicions d'ús normal.

For technical support, warranty claims, or any questions regarding your product, please contact VSYSTO customer service through the retailer where you purchased the product or visit the official VSYSTO weblloc per obtenir informació de contacte.

Si us plau, conserveu el comprovant de compra per motius de garantia.