BONTANNY Red Light Therapy Device XL 400W User Manual

1. Informació important de seguretat

ADVERTIMENT: Please use the included eye protection when irradiating the face or eyes.

This device is intended for general wellness and relaxation. It is not intended to diagnose, treat, cure, or prevent any disease or health condition. Consult with a healthcare professional before using this device if you have any medical conditions or concerns.

Materials: The device is constructed primarily from metal.

2. Producte acabatview

The BONTANNY Red Light Therapy Device XL 400W is designed to deliver targeted red and near-infrared light wavelengths for various wellness applications. It features 300 dual-chip LEDs, offering specific wavelengths of 660nm (red) and 850nm (near-infrared). The device includes a remote control and an intelligent operation panel for ease of use.

Característiques principals:

• Dual-Chip LEDs: 300 LEDs providing 660nm (red) and 850nm (near-infrared) wavelengths.
• Alta irradiància: Delivers an impressive 118mW/cm² irradiation at 6 inches.
• Remote Control & Panel Operation: Easy setting of 3 modes and adjustable treatment times (1-30 minutes).
• Angle de feix ample: Each LED boasts a 60-degree beam angle for even and widespread penetration.
• Ús versàtil: Suitable for various body areas, including face and body.
• Dimensions: Approximately 37.4" x 13.7" x 2.6" (95cm x 35cm x 6.6cm).
• Pes: Aproximadament 31.45 lliures (14.26 kg).

Figure 1: BONTANNY Red Light Therapy Device XL 400W.

3. Instruccions de configuració

The BONTANNY Red Light Therapy Device XL 400W can be used in various configurations.

Desembalatge:

1. Traieu amb cura el dispositiu i tots els accessoris de l'embalatge.
2. Verify that all components are present: Red Light Therapy Device, power cord, remote control, hanging kit, and eye protection.
3. Inspect the device for any signs of damage during transit. If damaged, contact customer support immediately.

Opcions de muntatge:

The device is designed to be used with a horizontal or vertical stand (sold separately) or can be hung using the included hanging kit.

• Ús de l'estand: If using a BONTANNY horizontal or vertical stand, follow the assembly instructions provided with the stand. Ensure the device is securely mounted.
• Hanging Kit: For wall or door mounting, use the provided hanging kit. Ensure the mounting surface is sturdy enough to support the device's weight (approximately 31.45 lbs / 14.26 kg).

Figure 2: The device supports both vertical and horizontal orientations with an optional stand (sold separately).

Figure 3: Compatible stands for the device, available in black and white (sold separately).

4. Instruccions de funcionament

Tauler de control i control remot:

The device can be operated using the intelligent control panel located on the side of the unit or via the included remote control. The remote control requires a 23A 12V battery (not included).

Figure 4: The device features a user-friendly control panel and remote for easy operation.

Funcionament bàsic:

1. Encès: Connect the power cord to the device and a suitable power outlet. Flip the main power switch located on the back of the panel. The fans will turn on, and the red lights will briefly illuminate before turning off.
2. Seleccioneu el mode: Use the "MODE" button on the control panel or remote to cycle through the 3 available light therapy modes:
   • Red Light (660nm) only
   • Near-Infrared Light (850nm) only
   • Red + Near-Infrared Light (660nm & 850nm)
3. Estableix el temporitzador: Use the "+" and "-" buttons on the control panel or remote to adjust the treatment time from 1 to 30 minutes.
4. Inici/Parada: Press the "ON/OFF" button to start or stop the light therapy session.
5. Protecció ocular: Always wear the provided eye protection during facial or eye area treatments.

5. Pautes d'ús

For optimal results and safety, adhere to the following guidelines:

• Treatment Distance: Position yourself 16-24 inches (approximately 40-60 cm) from the device. Closer distances increase irradiance.
• Durada del tractament: Recommended treatment sessions are 10-20 minutes. Do not exceed 30 minutes per session.
• Freqüència: Use the device daily or as recommended by a healthcare professional.
• Protecció ocular: Always wear the provided eye protection, especially when treating the face or eyes.
• Hidratació: Ensure adequate hydration before and after sessions.

Figure 5: Diagram illustrating irradiance levels and coverage at various distances from the device.

Figura 6: Example of a user receiving red light therapy in a horizontal position.

Figura 7: Un altre example of a user receiving red light therapy in a horizontal position.

Figure 8: User performing light exercise near the red light therapy device.

6. Manteniment

• Neteja: Ensure the device is unplugged before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or liquids directly on the LEDs.
• Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, lluny de la llum solar directa i de la humitat quan no l'utilitzeu.
• Refrigeració: The metal case may become warm during operation. Allow the internal fans to run for a few minutes after use to cool down the unit before turning off the main power switch.

7. Solució De Problemes

If you encounter issues with your BONTANNY Red Light Therapy Device, please refer to the following common solutions:

• El dispositiu no s'encén:
  • Assegureu-vos que el cable d'alimentació estigui ben connectat tant al dispositiu com a una presa de corrent que funcioni.
  • Check that the main power switch on the back of the device is in the "ON" position.
• El control remot no respon:
  • Verify that a 23A 12V battery is correctly installed in the remote control.
  • Substituïu la bateria si està esgotada.
  • Ensure there are no obstructions between the remote and the device's sensor.
• Llums que no s'il·luminen:
  • After powering on, the lights briefly flash then turn off. Use the "ON/OFF" button on the control panel or remote to start a session.
  • Ensure a mode (Red, NIR, or Red+NIR) and a timer duration have been selected.
• Calor excessiu:
  • The device is designed with cooling fans. Ensure the vents on the sides are not obstructed.
  • Allow the fans to run for a few minutes after use to dissipate heat.

If the problem persists, please contact BONTANNY customer support.

8. Especificacions

Figura 9: Representació visual de les dimensions del producte i les especificacions clau.

9. Garantia i Suport

BONTANNY offers a 30-day testing period for this product, allowing you to evaluate its performance with peace of mind.

For any questions, technical assistance, or support needs, please contact BONTANNY customer service. Our team is dedicated to providing friendly and prompt assistance.

Informació de contacte: Please refer to your purchase documentation or the BONTANNY official weblloc web per obtenir les dades de contacte d'atenció al client més actualitzades.