UTRAI JS-9
Manual d'usuari del motor d'arrencada i del compressor d'aire UTRAI JS-9
Model: JS-9 | Marca: UTRAI
Producte acabatview
The UTRAI JS-9 is a versatile multi-function device designed for automotive emergencies and daily convenience. It integrates a powerful jump starter, an air compressor, and a portable power bank into a single compact unit. This manual provides detailed instructions for safe and effective operation.

Contingut del paquet
Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:
- UTRAI JS-9 Jump Starter and Air Compressor Unit
- Smart Jumper Clamps
- Mànega d'aire
- Nozzle Adapters (for various inflatables)
- Cable de càrrega USB-C
- Manual d'usuari
- Estoig d'emmagatzematge
Característiques clau
- High-Capacity Jump Starter: 5000A peak current, 27000mAh battery capacity, capable of starting 12V vehicles (up to 8.5L diesel and all gasoline engines) over 30 times on a single charge.
- Compressor d'aire integrat: 150 PSI maximum pressure with tire pressure detection, suitable for car tires, motorcycle tires, bicycle tires, and various inflatables.
- Banc d'energia portàtil: 18W USB-A output and 18W Type-C input/output for charging smartphones, tablets, and other USB-powered devices.
- Multi-function LED Light: Features illumination, strobe, and SOS modes for emergency situations.
- Proteccions de seguretat avançades: Built-in safeguards against short circuits, overheating, low temperature, overvoltage, minvartage, overcurrent, overdischarge, and overload.
- Pantalla LCD gran: Provides clear readings for input/output status, power indicator, air pressure, and inflation unit.



Configuració inicial i càrrega
- Desembalatge: Carefully remove all components from the packaging and check against the package contents list.
- Càrrec inicial: Before first use, fully charge the UTRAI JS-9. Connect the provided USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The LCD display will show the charging progress. A full charge is indicated when the battery icon is solid.
- Emmagatzematge: Store the device in its carrying case in a cool, dry place when not in use.
Instruccions de funcionament
Arrancar un vehicle
Notes importants de seguretat:
- Assegureu-vos que el contacte del vehicle estigui apagat.
- No toqueu el cl vermell i negreamps junts.
- No arrenqueu un vehicle amb ajuda d'un cable si la bateria està carregadatage és inferior a 10V.
- If the first attempt fails, wait at least 30 seconds before trying again.
- Remove the jump starter immediately after the vehicle starts.
- Connecteu el pont intel·ligent clamps to the UTRAI JS-9's jump start port.
- Connecteu el vermell (+) clamp al terminal positiu de la bateria del vehicle.
- Connecteu el negre (-) clamp to the vehicle's negative battery terminal or a solid, unpainted metal part of the engine block.
- Assegureu-vos que el clamps are securely attached. The smart clamp indicator light will show readiness.
- Engegueu el motor del vehicle.
- Un cop arrencat el vehicle, desconnecteu immediatament el claviller negre.amp primer, després el vermell clamp de la bateria del vehicle.
- Disconnect the smart jumper clamps from the UTRAI JS-9.
Ús del compressor d'aire
The integrated air compressor can inflate tires and other inflatables up to 150 PSI.
- Connect the air hose to the air output port on the UTRAI JS-9.
- Attach the appropriate nozzle adapter to the air hose, if needed, for your inflatable item.
- Connecteu la mànega d'aire a la vàlvula del pneumàtic o a l'element inflable.
- Turn on the UTRAI JS-9. The display will show the current pressure.
- Utilitzeu els botons '+' i '-' per ajustar la pressió desitjada.
- Press the inflation button to start inflation. The compressor will automatically stop when the preset pressure is reached.
- Disconnect the air hose from the item and the UTRAI JS-9.

Ús com a Power Bank
The UTRAI JS-9 can charge your electronic devices.
- Connect your device's USB charging cable to the USB-A output port on the UTRAI JS-9.
- El dispositiu començarà a carregar-se automàticament.
- Monitor the battery level on the UTRAI JS-9's display.

Ús de la llum LED
The built-in LED light provides illumination for various situations.
- Press the light button once to turn on the steady illumination mode.
- Premeu de nou per al mode estroboscòpic.
- Premeu una tercera vegada per al mode de senyal SOS.
- Premeu una quarta vegada per apagar la llum.

Manteniment i emmagatzematge
- Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
- Càrrega: Per a una durada òptima de la bateria, carregueu completament el dispositiu cada 3-6 mesos, fins i tot si no l'esteu fent servir.
- Temperatura d'emmagatzematge: Store the device in a temperature range of -20°C to 60°C (-4°F to 140°F). Avoid extreme heat or cold.
- Eviteu la humitat: Keep the device dry and away from water or excessive humidity.
- Clamp Atenció: Inspeccioneu el cl del pontampComproveu si hi ha algun dany o corrosió abans de cada ús.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s’encén. | La bateria està esgotada. | Carregueu el dispositiu completament. |
| El vehicle no arrenca després d'un intent de salt. | Clamps not connected properly; Vehicle battery too low; Engine issue. | Assegureu-vos que clamps are securely connected to correct terminals. Check vehicle battery voltage. Consult a mechanic if the issue persists. |
| El compressor d'aire no s'infla. | Hose not connected securely; Pressure setting too low; Device battery low. | Check hose connections. Adjust desired pressure. Charge the device. |
| El banc d'energia no carrega els dispositius. | Cable issue; Device battery low; Incompatible device. | Try a different USB cable. Charge the UTRAI JS-9. Ensure your device is compatible with USB charging. |
Especificacions del producte
| Característica | Especificació |
|---|---|
| Model | JS-9 |
| Corrent màxima | 5000A |
| Capacitat de la bateria | 27000 mAh |
| Inici Voltage | 12 V |
| Compatibilitat del motor (gasolina) | All gasoline engines |
| Compatibilitat de motors (dièsel) | Up to 8.5L diesel engines |
| Pressió màxima del compressor d'aire | 150 PSI |
| Sortida USB-A | 18W |
| Entrada/sortida tipus C | 18W |
| Temperatura de funcionament | -20 °C a 60 °C (-4 °F a 140 °F) |
| Dimensions | 25.1 x 13.8 x 10.9 cm (aprox.) |
| Pes | 1.39 kg (aprox.) |
Precaucions de seguretat
Llegiu tots els avisos i instruccions de seguretat abans d'utilitzar aquest producte. Si no seguiu els avisos i les instruccions, podeu patir descàrregues elèctriques, incendis i/o lesions greus.
- No feu servir el dispositiu si està danyat.
- Mantenir fora de l'abast dels nens.
- No exposeu el dispositiu a la pluja o a condicions humides.
- Do not disassemble the device. Refer all servicing to qualified service personnel.
- Feu servir només els accessoris proporcionats o recomanats.
- Assegureu-vos una ventilació adequada durant l'ús i la càrrega.
- Eviteu temperatures extremes.
- Do not use the jump starter to charge vehicle batteries. It is designed for jump starting only.
- Always disconnect the negative clamp first when finished jump starting.
Garantia i Suport
UTRAI products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official UTRAI weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.