Intellinet 48-Port L3 Managed Gigabit PoE+ Switch (Model 562041) User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch, Model 562041. This device is designed for enterprise networks requiring efficient and scalable routing solutions with high-powered Power over Ethernet (PoE) capabilities.

2. Informació de seguretat

Observe the following safety precautions to prevent damage to the device and injury to personnel:

Assegureu-vos de posar a terra correctament el dispositiu.
Do not expose the switch to water or excessive humidity.
Feu funcionar el dispositiu dins dels rangs de temperatura i humitat especificats.
Use only the power cable provided or a compatible replacement.
Do not open the switch casing; demaneu el servei tècnic a personal qualificat.
Assegureu-vos que la ventilació al voltant de l'interruptor sigui adequada per evitar el sobreescalfament.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

Intellinet 48-Port L3 Managed Gigabit PoE+ Switch (Model 562041)
Cable d'alimentació
19" rackmount brackets
Peus de goma
Instruccions (aquest manual)

4. Producte acabatview

The Intellinet 562041 is a robust Layer 3 managed switch featuring 48 Gigabit PoE+ ports and six 10G SFP+ uplink slots. It supports a total power budget of 850 watts for PoE devices.

4.1 Tauler frontal

**Figura 4.1:** Davant view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch. This image shows the 48 Gigabit Ethernet ports, six SFP+ slots, and LED indicators on the front panel.

El panell frontal inclou:

48 x 10/100/1000 Mbps RJ45 Ports: These ports support Power over Ethernet Plus (PoE+) for connecting compatible devices.
6 x 10 Gigabit SFP+ Slots: For high-speed uplink connections to other network devices.
Indicadors LED: Provide status information for power, system, link activity, and PoE status.
Port de la consola: Per a la gestió i configuració locals.

Close-up of SFP+ and Console ports on the Intellinet switch — **Figura 4.2:** Primer pla view of the SFP+ uplink ports and the console port on the right side of the switch's front panel. The SYS and PWR LEDs are also visible.

Close-up of LED indicators on the Intellinet switch — **Figura 4.3:** Primer pla view of the LED indicators (LED MODE, LINK, PoE) located on the left side of the switch's front panel, above the RJ45 ports.

4.2 Panell posterior

**Figura 4.4:** posterior view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch. This image shows the power input and cooling fans.

The rear panel typically includes the AC power input and cooling fans for heat dissipation.

posterior view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch with warning label — **Figura 4.5:** posterior view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch, highlighting the power input, cooling fans, and a warning label regarding proper grounding.

5. Configuració

5.1 Instal·lació física

The switch can be installed in a standard 19-inch equipment rack or placed on a desktop.

Instal·lació de rack: Attach the provided rackmount brackets to the sides of the switch using the included screws. Secure the switch into a standard 19-inch rack.
Instal·lació d'escriptori: Attach the provided rubber feet to the bottom of the switch to prevent scratching and ensure stability. Place the switch on a flat, stable surface.

5.2 Connexió d'alimentació

Connect the provided power cable to the AC power input on the rear panel of the switch and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before connecting the power cable.

5.3 Connexions de xarxa

Dispositius PoE: Connect PoE-compatible devices (e.g., IP cameras, VoIP phones, wireless access points) to any of the 48 Gigabit RJ45 ports. The switch will automatically detect and provide power to these devices.
Connexions d'enllaç ascendent: Insert compatible SFP+ transceivers into the 10 Gigabit SFP+ slots and connect them to your core network or other high-speed devices using appropriate fiber optic cables.
Connexió a la consola: For initial configuration or direct management, connect a console cable from your computer to the console port on the switch.

5.4 Configuració inicial

Refer to the separate software configuration guide for detailed instructions on accessing the switch's management interface (web-based GUI or command-line interface via console port) and performing initial setup, including IP address assignment, user accounts, and basic network settings.

6. Instruccions de funcionament

6.1 Layer 3 Routing

This switch offers dynamic Layer 3 IP routing capabilities, including OSPF (Open Shortest Path First), RIP (Routing Information Protocol), and VRRP (Virtual Router Redundancy Protocol). These protocols enable efficient and scalable routing within complex network environments.

Diagram illustrating Layer 3 features like OSPF, RIP, VRRP, 6x10G SFP+, and 850W PoE — **Figura 6.1:** Acabatview of the switch's Layer 3 capabilities, including OSPF, RIP, VRRP, 6x10G SFP+ uplinks, and an 850W PoE budget.

6.2 Alimentació a través d'Ethernet (PoE+)

The switch provides up to 30 watts of power per port across its 48 PoE+ ports, with a total power budget of 850 watts. This allows for seamless integration of various PoE devices without the need for separate power adapters.

Diagram showing power consumption examples for various PoE devices — **Figura 6.2:** Examples of power consumption for various PoE devices, categorized by 802.3af (15W), 802.3at (30W), and 802.3bt (60W, 90W) standards.

6.3 PoE Scheduling

The switch supports PoE scheduling, allowing administrators to define specific times for powering on, powering off, or rebooting connected PoE devices. This feature can optimize power consumption and enhance network security.

Diagram illustrating PoE scheduling for various devices — **Figura 6.3:** Illustration of PoE scheduling, showing how power can be scheduled to turn off, reboot, or turn on for different devices on specific days and times.

PoE scheduling timeline example — **Figura 6.4:** A timeline example demonstrating how PoE scheduling can save power by turning off devices during non-business hours.

6.4 Self-Healing Functionality (PDM)

The Powered Device Monitor (PDM) feature enables the switch to proactively monitor the status of connected PoE devices. If a device becomes unresponsive, the PDM can automatically restart the PoE port to restore functionality, minimizing downtime and maintaining network integrity.

6.5 Gestió del núvol

The switch supports cloud management capabilities, allowing for remote configuration, monitoring, and troubleshooting of the device from a centralized platform. Refer to the cloud management documentation for setup and usage details.

7. Manteniment

7.1 actualitzacions de microprogramari

Regularly check the Intellinet Network Solutions website for the latest firmware updates. Applying firmware updates can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

7.2 Neteja

To clean the switch, power it off and disconnect all cables. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.

7.3 Consideracions ambientals

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in direct sunlight, near heat sources, or in areas with high dust accumulation.

8. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb el commutador.

8.1 Sense poder

Verify the power cable is securely connected to both the switch and a working electrical outlet.
Ensure the power switch on the rear panel is in the ON position.
Check the power outlet with another device to confirm it is functional.

8.2 No Link on a Port

Check the Ethernet cable connection at both ends. Ensure it is securely plugged in.
Verifiqueu que el cable no estigui malmès. Proveu-ne un altre.
Assegureu-vos que el dispositiu connectat estigui encès i funcioni correctament.
Check the port status in the switch's management interface.

8.3 El dispositiu PoE no rep alimentació

Confirm the connected device is a PoE-compatible device.
Comproveu el LED d'estat PoE del port específic.
Verify the total PoE power budget (850W) is not exceeded by all connected devices.
Utilize the Powered Device Monitor (PDM) feature to automatically restart the port if the device is unresponsive.
Check PoE settings in the switch's management interface.

9. Especificacions

Característica	Especificació
Número de model	562041
Marca	SOLUCIONS DE XARXA INTELLINET
Nombre de Ports	54 (48 x Gigabit PoE+, 6 x 10G SFP+)
Tipus d'interfície	PoE, SFP
Maximum Power (PoE Budget)	850 watts
Velocitat de transferència de dades	10 Gigabits Per Second (SFP+ uplinks)
Pes de l'article	6.2 quilograms (13.64 lliures)
Dimensions del producte (L x A x A)	13.78 x 17.32 x 1.73 polzades
Classificació de temperatura superior	104 graus Fahrenheit (40 °C)
Classificació de temperatura més baixa	32 graus Fahrenheit (0 °C)
Dispositius compatibles	Desktop, Router, PoE devices (IP cameras, VoIP phones, WAPs)
Components inclosos	19" rackmount brackets, Instructions, Rubber feet, power cable
UPC	766623562041

10. Garantia i Suport

10.1 Informació de la garantia

This Intellinet Network Solutions product is covered by a Garantia del fabricant de 3 anysSi us plau, conserveu el comprovant de compra per a reclamacions de garantia. La garantia cobreix defectes de materials i fabricació en condicions d'ús normal.

10.2 Suport tècnic

For technical assistance, product documentation, or to register your product, please visit the official Intellinet Network Solutions weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. Normalment, podeu trobar la informació de contacte al fabricant. weblloc o a l'embalatge del producte.

INTELLINET NETWORK SOLUTIONS 562041