JINJUNYE Countertop Ice Maker User Manual

1. Instruccions de seguretat importants

Please read all instructions carefully before using your JINJUNYE Ice Maker. Keep this manual for future reference.

• Seguretat elèctrica: Ensure the ice maker is connected to a grounded power outlet. Do not use if the power cord is damaged.
• Advertència de refrigerant: This appliance contains flammable refrigerant. Do not puncture the refrigerant tubing. Do not use mechanical devices or other means to defrost the ice maker.
• Col·locació: Col·loqueu la màquina de gel sobre una superfície estable i plana, allunyada de la llum solar directa i de fonts de calor. Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat.
• Configuració inicial: After receiving the ice maker, allow it to stand upright for at least 24 hours before plugging it in and operating. This allows the refrigerant to settle.
• Qualitat de l'aigua: Use only potable drinking water.
• Neteja: Desconnecteu sempre l'aparell abans de netejar-lo.
• Nens: Mantingueu els nens allunyats de la màquina de gel durant el funcionament.

2. Producte acabatview

The JINJUNYE Countertop Ice Maker is designed for convenience and efficiency, producing bullet-shaped ice cubes quickly.

Components clau:

• Tauler de control: Features indicator lights for "Add Water", "Ice Full", "Power", and buttons for "On/Off" and "Select" ice size (S/L).
• Cistella de gel: Removable basket for collecting and storing ice cubes.
• Scoop de gel: Included for easy ice retrieval.
• Embassament d'aigua: Located beneath the ice basket, with a maximum fill line.
• Tap de drenatge: Located at the bottom for draining water during cleaning.

Característiques:

• Fabricació ràpida de gel: Produces 9 bullet-shaped ice cubes in approximately 6 minutes. Max production up to 35 pounds per day.
• Dues mides de gel: Choose between small (S) and large (L) bullet ice cubes.
• Funció d'auto-neteja: Simplifies maintenance with an automated cleaning cycle.
• Sensors intel·ligents: Automatically stops ice production when the ice basket is full or when the water level is low, indicated by corresponding lights.
• Disseny portàtil: Compact dimensions (8.7"W x 11.34"D x 11.42"H) make it suitable for various locations.
• Funcionament de baix soroll: Designed to operate quietly.

Figure 2.1: Control Panel and Indicator Lights.

Figure 2.2: Two Available Ice Cube Sizes.

3. Configuració

1. Desembalar: Traieu amb cura la màquina de gel del seu embalatge.
2. Rest Period: Place the unit upright on a flat, stable surface. Allow it to rest for at least 24 hours before plugging it in. This is crucial for the compressor's longevity.
3. Neteja: Before first use, clean the interior of the ice maker and the ice basket with a soft cloth and mild detergent. Rinse thoroughly.
4. Afegeix aigua: Open the lid and remove the ice basket. Fill the water reservoir with potable drinking water up to the "MAX" fill line. Do not overfill.
5. Substituir la cistella: Place the ice basket back into the unit.
6. Connectar: Connecteu el cable d'alimentació a una presa de corrent elèctrica amb terra.

Figure 3.1: Initial Setup Steps.

4. Instruccions de funcionament

Fer gel:

1. Ensure the unit is set up as per Section 3.
2. Press the "ON/OFF" button to turn on the ice maker. The "Power" indicator light will illuminate.
3. Press the "SELECT" button to choose your desired ice cube size: "S" for small or "L" for large. The corresponding indicator light will illuminate.
4. The ice maker will begin the ice-making cycle. The first batch may take slightly longer.
5. When the ice basket is full, the "ICE FULL" indicator light will turn on, and the machine will automatically pause. Remove ice to resume production.
6. If the "ADD WATER" indicator light illuminates, the water reservoir is low. Add more water to continue ice production.

Figure 4.1: Control Panel in Operation.

5. Manteniment

Funció d'auto-neteja:

1. Assegureu-vos que la màquina de gel estigui buida de gel i aigua.
2. Add clean water to the reservoir up to the "MAX" fill line.
3. Long press the "ON/OFF" button for 5 seconds to activate the self-cleaning mode. The "S" and "L" indicator lights will blink consecutively.
4. The self-cleaning cycle typically lasts for 15 minutes.
5. Once the cycle is complete, drain the water by removing the drain plug located at the bottom of the unit.
6. It is recommended to perform the self-cleaning function once a month, especially in hard water areas.

Neteja general:

• Netegeu regularment l'exterior amb un drap suau iamp tela.
• Clean the interior components, including the ice basket and water reservoir, with a mild detergent and warm water. Rinse thoroughly to remove any soap residue.
• Assegureu-vos que totes les peces estiguin seques abans de tornar a muntar i fer funcionar la unitat.

Figure 5.1: Self-Cleaning Function Steps.

Figure 5.2: Hard Water Impact on Ice Maker (Descaling Recommendations).

6. Solució De Problemes

7. Especificacions

• Marca: JINJUNYE
• Model: B0D3PYN3L3
• Capacitat de producció de gel: Up to 35 lbs/day
• Ice Cube Production Time: 9 cubs en 6 minuts
• Capacitat d'emmagatzematge de gel: 2.3 lliures
• Capacitat del dipòsit d'aigua: 1.5 L
• Forma de cub de gel: Bala
• Mides dels cubs de gel: Petit (S), Gran (L)
• Dimensions (W*D*H): 8.7" x 11.34" x 11.42"
• Característiques: Self-cleaning, Intelligent Infrared Sensors, Low Noise

8. Garantia i Suport

JINJUNYE products are manufactured to the highest quality standards. For warranty information, technical support, or any questions regarding your ice maker, please refer to the contact information provided on the product packaging or visit the official JINJUNYE weblloc.

Always ensure you have your model number (B0D3PYN3L3) and purchase date available when contacting support.