vidaXL 842009

vidaXL Bed Frame Instruction Manual

Model: 842009 - Sonoma Oak, 160 x 200 cm

Introducció

This manual provides detailed instructions for the assembly, operation, and maintenance of your vidaXL Bed Frame, Model 842009. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This bed frame is designed to accommodate a mattress of 160 x 200 cm.

Informació de seguretat

  • Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si està trencada.
  • Munta el marc del llit sobre una superfície suau i neta per evitar ratllades.
  • Always use the correct tools as specified in the assembly steps.
  • No estrenyeu massa els cargols, ja que això podria danyar el material.
  • Mantingueu les peces petites fora de l'abast dels nens durant el muntatge per evitar riscos d'asfíxia.
  • Reviseu periòdicament totes les connexions per assegurar-vos que romanen ben ajustades.
  • The maximum weight capacity for this bed frame is 400 kg. Do not exceed this limit.

Contingut del paquet

Verifiqueu que tots els components següents estiguin inclosos al paquet:

  • Side panels (long and short)
  • Headboard/Footboard panels
  • Plywood slats
  • Center support beam (if applicable)
  • Hardware pack (screws, bolts, nuts, Allen key)
Diagram showing the dimensions of the bed frame

Imatge: Dimensions of the vidaXL Bed Frame (Model 842009). Overall dimensions are 203 cm (length) x 163 cm (width) x 17 cm (height). The internal dimensions for the mattress are 200 cm (length) x 160 cm (width).

Muntatge i muntatge

Seguiu aquests passos acuradament per a un muntatge correcte:

  1. Desempaquetar i identificar les peces: Carefully unpack all components and lay them out on a clean, soft surface. Identify each part using the provided parts list (if included).
  2. Muntar els costats del marc: Attach the side panels to the headboard and footboard panels using the provided screws and an Allen key. Ensure all connections are secure but do not overtighten initially.
  3. Install Center Support (if applicable): If your model includes a center support beam, install it now according to the instructions, ensuring it is properly aligned and secured.
  4. Fixar els llistons: Place the plywood slats across the bed frame. Secure each slat to the side rails using the provided screws. Ensure even spacing between slats for optimal mattress support.
Close-up of a corner joint of the bed frame

Imatge: Detail of a corner joint on the bed frame, showing the secure screw connection for structural integrity.

Close-up of the plywood slats installed on the bed frame

Imatge: View of the plywood slats properly installed within the bed frame, providing a sturdy base for the mattress.

Assembled bed frame without mattress, angled view

Imatge: Un angle view of the fully assembled vidaXL bed frame, ready for a mattress.

Instruccions de funcionament

Once assembled, the bed frame is ready for use. Simply place your 160 x 200 cm mattress directly onto the plywood slats. The slats are designed to provide even weight distribution and keep the mattress in place.

vidaXL bed frame with mattress and bedding in a bedroom setting

Imatge: The vidaXL bed frame with a mattress and bedding, showcasing its appearance in a bedroom environment.

Manteniment

  • Neteja: Wipe the bed frame with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the Sonoma Oak finish.
  • Inspecció: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability and safety.
  • Medi ambient: Keep the bed frame in a dry environment. Avoid prolonged exposure to direct sunlight or extreme temperature changes.
Close-up of the Sonoma Oak wood material texture

Imatge: Un primer pla view of the Sonoma Oak wood material, highlighting its texture and finish.

Resolució de problemes

  • Sorolls de grinyols: If the bed frame makes squeaking noises, check all connections and tighten any loose screws or bolts. Ensure the mattress is properly seated on the slats.
  • Inestabilitat: If the bed frame feels unstable, verify that all panels are correctly aligned and all hardware is fully tightened. Ensure the bed is on a flat, even surface.
  • Parts danyades: If any part is damaged or missing upon arrival, do not proceed with assembly. Contact customer support for replacement parts.

Especificacions

Número de model842009
MarcavidaXL
ColorSonoma Oak
MaterialEngineered Wood (Frame), Plywood (Slats)
Dimensions totals (L x A x A)203 x 163 x 17 cm (79.92 x 64.17 x 6.69 polzades)
Suitable Mattress Size (W x L)160 x 200 cm
Recomanació de pes màxim400 kg
Pes de l'article25.2 kg
Instruccions de cura del producteNetegeu amb Damp Tela

Garantia i Suport

For warranty information or technical support, please refer to the purchase documentation or contact vidaXL customer service. Keep your proof of purchase for any warranty claims.

© 2024 vidaXL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.