Introducció
Thank you for choosing the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser. This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and retain it for future reference.
Imatge: Frontal view of the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser, showcasing its three clear tanks and stainless steel base with dispensing levers.
Instruccions importants de seguretat
- Llegiu totes les instruccions abans d'utilitzar.
- Assegureu-vos que la font d'alimentació coincideixi amb les especificacions de l'etiqueta de classificació.
- No submergiu l'aparell, el cable o l'endoll en aigua o altres líquids.
- Superviseu els nens per assegurar-vos que no juguin amb l'aparell.
- Desendolleu la presa de corrent quan no utilitzeu i abans de netejar.
- No feu servir cap aparell amb un cable o un endoll danyats, o després que l'aparell funcioni malament o s'hagi fet malbé de cap manera.
- Utilitzeu només els accessoris recomanats pel fabricant.
- No utilitzar a l'aire lliure.
- No deixeu que el cable pengi de la vora d'una taula o taulell, ni toqui superfícies calentes.
- Col·loqueu sempre l'aparell sobre una superfície plana i estable.
- Aquest aparell està pensat per a ús comercial.
Components del producte
The RHINO DISBEF-3T dispenser consists of the following main components:
- Unitat base: Contains the cooling system and electrical components, made of stainless steel.
- Beverage Tanks (x3): Transparent, food-grade polycarbonate tanks, each with an 18-liter capacity.
- Tapes (x3): Covers for each beverage tank.
- Dispensing Levers (x3): "Push" type levers for controlled beverage flow.
- Drip Trays (x3): Removable trays located below each dispensing lever to catch spills.
- Agitation System: Fountain-type agitators within each tank to keep beverages mixed and chilled.
Image: An illustrative diagram highlighting key features of the dispenser, including triple tanks, polycarbonate construction, stainless steel cabinet, 680W power, and 18 liters per tank capacity.
Configuració i instal·lació
- Desembalatge: Carefully remove the dispenser from its packaging. Inspect for any damage.
- Col·locació: Place the dispenser on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit, especially at the rear and sides, to allow for proper heat dissipation from the cooling system.
- Neteja: Before first use, thoroughly clean all removable parts (tanks, lids, drip trays, agitators) with mild soap and water. Rinse thoroughly and dry.
- Muntatge:
- Insert the agitators into their respective positions within the base unit.
- Place the clean beverage tanks onto the base unit, ensuring they are securely seated.
- Attach the lids to the tanks.
- Position the drip trays under each dispensing lever.
- Connexió d'alimentació: Plug the power cord into a grounded electrical outlet that matches the appliance's voltage and frequency (680W power requirement).
Instruccions de funcionament
- Filling Tanks: Open the lids and pour your desired cold beverages into each of the three 18-liter tanks. Do not overfill.
- Encès: Locate the power switch (usually on the side or rear of the base unit) and turn the dispenser ON.
- Cooling and Agitation: The cooling system will begin to chill the beverages, and the fountain-type agitation system will start mixing the contents to maintain an even temperature and prevent settling. This process may take some time depending on the initial temperature of the beverages.
- Dispensació: To dispense a beverage, place a cup under the desired dispensing lever and press the lever inward. Release the lever to stop the flow.
- Nivells de seguiment: Regularly check beverage levels in the transparent tanks and refill as needed.
Imatge: Un primer pla view of the three "PUSH" dispensing levers on the front of the stainless steel base, indicating how to operate them.
Imatge: Un primer pla view of the three removable drip trays located beneath the dispensing levers, designed to catch any spills.
Neteja i Manteniment
Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your dispenser.
- Neteja diària:
- Turn off and unplug the dispenser.
- Empty any remaining beverages from the tanks.
- Remove the tanks, lids, agitators, and drip trays.
- Wash these removable parts with warm, soapy water. Use a soft brush for agitators if needed.
- Esbandiu bé amb aigua neta i deixeu-ho assecar completament a l'aire.
- Netegeu l'exterior de la unitat base amb anuncisamp drap. No utilitzeu productes de neteja abrasius ni submergiu la unitat base en aigua.
- Manteniment periòdic:
- Comproveu el cable d'alimentació per detectar qualsevol signe de dany.
- Ensure ventilation openings on the base unit are clear of dust and debris.
Guia de resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Dispenser not cooling |
|
|
| Beverage not dispensing |
|
|
| Agitator not working |
|
|
Especificacions
| Marca | rinoceront |
| Model | DISBEF-3T |
| Color | Negre |
| Dimensions (L x A x A) | 40 cm x 70 cm x 73 cm |
| Capacitat total | 54 Liters (3 x 18 Liters per tank) |
| Material | Stainless Steel (base), Food-Grade Polycarbonate (tanks) |
| Poder | 680 watts |
| Pes | 48 kg |
| Agitation System | Fountain Type |
Image: A diagram illustrating the dimensions of the dispenser: 70 cm width, 40 cm depth, and 73 cm height, with a total weight of 48 kg.
Garantia i Suport
For warranty information, technical support, or service inquiries, please contact RHINO customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Refer to the official RHINO weblloc web o la documentació de compra per obtenir dades de contacte específiques i condicions de garantia.
