AIYIMA DC48V 10A GaN Power Supply Adapter User Manual

Introducció

This manual provides essential information for the safe and efficient use of your AIYIMA DC48V 10A GaN Power Supply Adapter. This switching power supply is designed to convert AC110/220V input to a stable DC48V 10A output, suitable for various audio amplifiers, including the TPA3255 Stereo Audio Amplifier series (A07, A07 MAX, A08 PRO, A70).

The adapter features high efficiency, high power delivery, low power consumption, and is built with over-current, over-voltage, and short-circuit protection for reliable operation.

Què hi ha a la caixa

1 x AIYIMA DC48V 10A GaN Power Supply Adapter (Model JYH37Z)

Note: An AC power cord is typically required and may be sold separately depending on the region.

Configuració

Desembalatge: Traieu amb cura la font d'alimentació del seu embalatge. Inspeccioneu-la per veure si hi ha signes de danys.
Col·locació: Place the power supply on a stable, flat surface with adequate ventilation. Ensure it is not covered or placed in an enclosed space that could restrict airflow.
Connecta't a Ampmés viu: Locate the DC input port on your compatible audio amplifier (e.g., AIYIMA A07, A07 MAX, A08 PRO, A70). Connect the DC output cable (5.5*2.5mm connector) from the power supply to the amplifier's DC input port. Ensure a secure connection.
Connecteu-vos a l'alimentació de CA: Connect a suitable AC power cord (not included) to the AC input port on the power supply. Then, plug the AC power cord into a standard wall outlet (AC110V or AC220V, the unit supports both).
Encès: Once all connections are secure, switch on the power supply (if it has a switch) and then power on your ampmés viu.

posterior view of AIYIMA DC48V 10A GaN Power Supply Adapter showing AC input and DC output cable.

Imatge: Part posterior view of the power supply, illustrating the AC input port and the attached DC output cable.

A dalt i a baix view of AIYIMA DC48V 10A GaN Power Supply Adapter.

Imatge: Superior i inferior views of the power supply, showing the overall design and the AC input port.

Instruccions de funcionament

The AIYIMA DC48V 10A GaN Power Supply Adapter is designed for straightforward operation. Once properly connected to your audio amplifier and an AC power source, it will provide stable DC48V power.

Ensure the power supply is securely connected to both the AC mains and your ampmés viu.
Si el teu amplifier has a power switch, turn it on after the power supply is connected and powered.
The power supply operates automatically within its specified voltage range (AC110V-220V). No manual voltagCal una selecció electrònica.
Monitoritza el teu amplifier's performance. This power supply is designed to enhance power delivery, dynamics, and clarity for compatible ampaixecadors.

Davant view of AIYIMA DC48V 10A GaN Power Supply Adapter.

Imatge: Frontal view of the power supply, showing its compact design.

Manteniment

Per garantir la longevitat i el rendiment òptim de la vostra font d'alimentació, seguiu aquestes pautes de manteniment:

Neteja: Disconnect the power supply from the AC outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using liquid cleaners, aerosols, or solvents.
Ventilació: Ensure that the ventilation openings on the power supply are not blocked. Proper airflow is crucial to prevent overheating.
Emmagatzematge: Si guardeu la unitat durant un període prolongat, desconnecteu-la de l'alimentació i guardeu-la en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
Cura del cable: Avoid bending or crimping the power cables excessively. Regularly check cables for any signs of wear or damage.

Resolució de problemes

If you encounter issues with your AIYIMA DC48V 10A GaN Power Supply Adapter, refer to the following common troubleshooting steps:

Problema	Causa possible	Solució
Sense poder ampmés viu	Cable d'alimentació de CA no connectat o fluix. La presa de paret no funciona. Power supply or ampapagat del lifier.	Ensure AC power cord is securely plugged into both the power supply and the wall outlet. Prova la presa de corrent amb un altre dispositiu. Verify both the power supply and amplifier are switched on.
Humming or noise from ampmés viu	Problema de bucle de terra. Interferències d'altres dispositius electrònics.	Ensure all audio components are connected to the same power strip or outlet. Try isolating the power supply from other devices. Consider using a ground loop isolator if the issue persists.
Power supply feels excessively hot	Ventilació inadequada. Overload (drawing too much current).	Ensure proper airflow around the unit. Do not cover. Verifica el teu amplifier's power requirements do not exceed the power supply's 10A rating.

If the problem persists after attempting these solutions, please contact AIYIMA customer support.

Especificacions

AIYIMA DC48V 10A GaN Power Supply Adapter with dimensions labeled.

Image: Dimensions of the AIYIMA DC48V 10A GaN Power Supply Adapter.

Característica	Detall
Model	JYH37Z
Marca	AIYIMA
Entrada Voltage	AC 110V / 220V (Auto-sensing)
Vol. De sortidatage	DC 48V
Corrent de sortida	10A
DC Connector Size	5.5*2.5 mm
Tipus de material	GaN (Gallium Nitride)
Dimensions de l'article (L x A x A)	8.18 x 3.58 x 1.69 polzades (208 x 91 x 43 mm)
Pes de l'article	2.5 lliures
Certificació de seguretat	TUV

Garantia

This AIYIMA power supply comes with a 12 mesos de garantia des de la data de compra. Aquesta garantia cobreix els defectes de fabricació i els mals funcionaments en condicions d'ús normal. No cobreix els danys causats per un mal ús, accidents, modificacions no autoritzades o instal·lació incorrecta.

Conserveu el vostre comprovant de compra per a reclamacions de garantia.

Suport

For technical assistance, troubleshooting, or warranty inquiries, please contact AIYIMA customer support through the retailer where the product was purchased or visit the official AIYIMA weblloc.

AIYIMA Official Store: ExploreHiFi·HearTrue on Amazon

AIYIMA JYH37Z