XOSS XR01 Bicycle Tail Light User Manual

1. Producte acabatview

The XOSS XR01 is an advanced bicycle tail light designed to enhance cycling safety. It features intelligent automatic lighting, a sensitive brake sensor, and a durable waterproof design. This manual provides detailed instructions for its installation, operation, and maintenance.

Image: XOSS XR01 Smart Tail Light highlighting its key features.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• XOSS XR01 Tail Light x 1
• Saddle Bracket x 1
• Seatpost Bracket x 1
• Cable de càrrega tipus C x 1
• Banda de goma x 1
• Binding Bands x 4
• Manual d'usuari x 1

3. Instal·lació

The XOSS XR01 offers two convenient installation methods without requiring any tools.

3.1 Seatpost Mount

Attach the seatpost bracket to your bicycle's seatpost using the provided rubber band. Then, slide the XR01 tail light onto the bracket until it clicks securely into place.

3.2 Saddle Mount

Secure the saddle bracket to the saddle rails using the binding bands. Once the bracket is firm, slide the XR01 tail light onto the bracket until it locks securely.

4. Càrrega

The XOSS XR01 features a convenient Type-C charging port for quick and efficient power replenishment.

To charge, open the rubber cover on the side of the light to reveal the Type-C port. Insert the provided Type-C charging cable into the port and connect the other end to a USB power source. A full charge takes approximately 1 hour, providing 7-16 hours of use depending on the mode, and up to 3 months of standby time.

5. Funcionament

5.1 Encès/Apagat

Premeu i manteniu premut el botó d'engegada durant 2 segons per encendre o apagar la llum.

5.2 Canvi de mode

Once powered on, short press the power button to cycle through the available lighting modes. The XR01 features mode memory, automatically recalling the last used mode when turned on.

5.3 Automatic Lighting/Extinguishing

The XR01 is equipped with a vibration sensor. It will automatically turn on when vibration is detected. If no vibration is detected for 30 seconds, the light will automatically turn off to conserve battery. It will automatically turn back on when vibration is detected again.

5.4 Smart Brake Sensor

The built-in brake sensor detects when you are braking and automatically illuminates the light at maximum brightness, significantly enhancing safety by alerting vehicles behind you.

5.5 Memòria de mode

The device automatically remembers the last used lighting mode before it was turned off, ensuring convenience for your next ride.

6. Manteniment

6.1 Impermeabilització

The XOSS XR01 features an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. This allows for continued use even in heavy rain. Ensure the Type-C charging port cover is securely closed to maintain its waterproof integrity.

6.2 Neteja

Netegeu la llum amb un suau, damp cloth to remove dirt and dust. Avoid using abrasive cleaners or solvents that could damage the surface or lens.

6.3 Emmagatzematge

When not in use for extended periods, store the tail light in a cool, dry place. It is recommended to fully charge the battery every three months to prolong its lifespan.

7. Solució De Problemes

• La llum no s'encén: Ensure the battery is charged. Press and hold the power button for 2 seconds to activate.
• Brake sensor not working: Check if the light is securely mounted and positioned correctly. Ensure the sensor area is clean and unobstructed.
• Autonomia curta de la bateria: Ensure the light is fully charged. Battery life can vary based on the selected lighting mode.
• Entrada d'aigua: If water enters the device, immediately turn it off and allow it to dry completely. Ensure the Type-C port cover is properly sealed during use.

8. Especificacions

9. Informació de seguretat

• Assegureu-vos sempre que el llum posterior estigui ben muntat abans de conduir.
• Do not look directly into the light when it is on, as it may cause temporary vision impairment.
• Mantenir fora de l'abast dels nens.
• No desmunteu ni intenteu reparar el dispositiu vosaltres mateixos. Contacteu amb l'assistència al client per obtenir assistència.
• Eliminar la bateria d'acord amb la normativa local.

10. Garantia i Suport

Your XOSS XR01 Bicycle Tail Light comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding your product, please contact XOSS customer service through the retailer where you purchased the product or visit the official XOSS weblloc.