Srutueo S8601A 3-in-1 CO2 Meter Air Quality Monitor User Manual

1. Introducció

The Srutueo S8601A is a portable 3-in-1 air quality monitor designed to measure Carbon Dioxide (CO2) concentration, temperature, and humidity. This device utilizes NDIR (Non-Dispersive Infrared) technology for accurate CO2 detection. It is suitable for monitoring indoor air quality in various environments such as homes, offices, schools, and public places. This manual provides essential information for the safe and effective operation of your device.

2. Informació de seguretat

• Llegiu atentament totes les instruccions abans d'utilitzar el dispositiu.
• No exposeu el dispositiu a temperatures extremes, humitat o llum solar directa.
• Eviteu deixar caure o sotmetre el dispositiu a forts impactes.
• No intenteu desmuntar ni modificar el dispositiu. Això anul·larà la garantia i pot causar danys.
• Mantingueu el dispositiu allunyat de l'aigua i altres líquids.
• Use only specified batteries (AAA) for operation. Ensure correct polarity when inserting batteries.
• Eliminar les bateries usades d'acord amb la normativa local.

3. Producte acabatview

The Srutueo S8601A features a clear digital display and intuitive buttons for easy operation. It provides real-time readings of CO2 levels, temperature, and relative humidity.

Figura 3.1: Frontal view of the Srutueo S8601A CO2 meter, displaying CO2 concentration (410 ppm), temperature (28.2°C), and relative humidity (63% RH).

Figure 3.2: Key features of the Srutueo S8601A, including NDIR CO2 sensor, temperature unit conversion, measurement hold function, red, yellow, and green backlight, and automatic shutdown.

3.1 Components del dispositiu

• Sensor de CO2: Situat a la part superior del dispositiu.
• Pantalla LCD: Shows CO2 concentration, temperature, and humidity.
• Botó HOLD: Freezes the current readings on the display.
• Botó de retroil·luminació: Adjusts display brightness or changes backlight color (if applicable).
• Botó d'encesa: Encén/apaga el dispositiu.
• Botó °C/°F: Alterna entre les unitats de temperatura Celsius i Fahrenheit.
• Botó de so: Toggles alarm sound on/off.
• Compartiment de la bateria: Located on the back for AAA batteries.

4. Configuració

4.1 Instal·lació de la bateria

1. Localitzeu la tapa del compartiment de la bateria a la part posterior del dispositiu.
2. Feu lliscar la tapa cap avall per obrir el compartiment.
3. Insert 3 AAA batteries, ensuring correct polarity (+ and - terminals).
4. Tanqueu la tapa del compartiment de la bateria lliscant-la cap amunt fins que encaixi al seu lloc.

Figure 4.1: Battery compartment open, showing the correct placement for three AAA batteries.

Figura 4.2: Esquena view of the device with the battery compartment securely closed.

5. Instruccions de funcionament

5.1 Encès/Apagat

• Per encendre, premeu i manteniu premut Botó d'engegada (red button) for approximately 2 seconds. The device will perform a self-test and then display current readings.
• Per apagar-lo, manteniu premut el botó Botó d'engegada again for approximately 2 seconds.

5.2 Prendre mesures

Once powered on, the device will automatically begin measuring CO2 concentration, temperature, and humidity. Allow a few minutes for the readings to stabilize, especially after initial power-on or moving to a new environment.

5.3 Interpreting CO2 Readings and Backlight Indicators

The device uses a color-coded backlight system to provide a quick visual indication of CO2 levels:

Figura 5.1: Examples of the three-color screen indicating different CO2 concentration ranges.

• Retroiluminació verda: Indicates good air quality, typically below 1000 ppm CO2.
• Retroiluminació groga: Indicates moderate air quality, typically between 1000-2000 ppm CO2. Ventilation is recommended.
• Retroiluminació vermella: Indicates poor air quality, typically above 2000 ppm CO2. Immediate ventilation is strongly recommended.

Note: Specific thresholds for color changes may vary slightly. Refer to local air quality guidelines for detailed recommendations.

5.4 Funció HOLD

• Premeu el botó Botó HOLD to freeze the current readings on the display. This is useful for recording specific measurements.
• Premeu el botó Botó HOLD de nou per reprendre les mesures en temps real.

5.5 Temperature Unit Conversion

• Premeu el botó Botó ° C / ° F to switch the temperature display between Celsius (°C) and Fahrenheit (°F).

5.6 Ajust de la llum de fons

• Premeu el botó Botó de retroil·luminació (sun icon) to adjust the brightness of the display backlight. Repeated presses may cycle through different brightness levels or turn the backlight off/on.

5.7 Sound Alarm

• Premeu el botó Botó de so (speaker icon) to toggle the audible alarm on or off. The alarm will sound when CO2 levels exceed a preset threshold (if applicable).

6. Manteniment

6.1 Neteja

• Netegeu el dispositiu amb un drap suau i sec.
• Do not use abrasive cleaners, solvents, or corrosive chemicals.
• Ensure no liquid enters the sensor openings or buttons.

6.2 Emmagatzematge

• Quan no les feu servir durant períodes prolongats, traieu les piles per evitar fuites.
• Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

Srutueo products are manufactured to high quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the official Srutueo website or contact customer service through your point of purchase.