AutoFull G5 Ergonomic Mesh Gaming Chair Instruction Manual

1. Introducció

Thank you for choosing the AutoFull G5 Ergonomic Mesh Gaming Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

2. Informació de seguretat

• This product is designed to support a static load of approximately 150 kg (330 lbs). Do not exceed this weight limit.
• Assembly is required. Follow the assembly instructions precisely to ensure proper function and safety.
• Mantingueu les peces petites allunyades dels nens per evitar perills d'asfixia.
• Ensure all screws and bolts are tightened securely before using the chair. Periodically check and re-tighten as necessary.
• Eviteu estar dret a la cadira o utilitzar-la com a tamboret.
• Do not use the chair on uneven surfaces.

3. Contingut del paquet

Abans del muntatge, verifiqueu que tots els components siguin presents i no estiguin danyats. Si hi ha alguna peça que falti o que estigui danyada, poseu-vos en contacte amb el servei d'atenció al client.

• Respatller de la cadira
• Base del seient amb reposabraços
• Reposacaps
• Cilindre d'elevació de gas
• Base d’estrelles
• Rodes (5 peces)
• Footrest (integrated or separate, depending on model)
• Maquinari de muntatge (cargols, volanderes, clau Allen)
• Japanese Assembly Manual

4. Instruccions de muntatge

Follow these steps carefully for proper assembly. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Fixeu les rodes a la base en forma d'estrella: Insert each of the five casters into the holes at the end of each leg of the star base until they click securely into place.
2. Inseriu l'elevador de gas: Place the gas lift cylinder into the center hole of the assembled star base. Ensure it is seated firmly.
3. Attach Seat Base to Gas Lift: Carefully align the center mechanism of the seat base with the top of the gas lift cylinder. Lower the seat base onto the gas lift, applying gentle pressure until it is seated.
4. Fixeu el respatller a la base del seient: Align the backrest's mounting brackets with the corresponding holes on the seat base. Secure with the provided screws and tighten using the Allen wrench.
5. Instal·leu el reposacaps: Slide the headrest into the designated slots at the top of the backrest. Adjust to your preferred height and angle.
6. Comprovacions finals: Ensure all screws are tightened, and the chair feels stable before use.

Figure 1: Overall dimensions of the AutoFull G5 Gaming Chair.

5. Instruccions d'ús (ajustos)

The AutoFull G5 chair offers multiple adjustment options for personalized comfort:

5.1. Ajust del reposacaps

The headrest features a dual-axis adjustment design:

• Ajust d'alçada: Adjust the headrest vertically by up to 60 mm.
• Ajust d'angle: The main axis allows for an upward and downward adjustment of up to 70 degrees.

Figura 2: Detallada view of the adjustable headrest.

5.2. Ajust de suport lumbar

The multi-directional lumbar support provides comprehensive lower back comfort:

• Ajust de profunditat: Adjust forward and backward by 20 mm.
• Ajust d'alçada: Adjust vertically by 60 mm.
• Ajust d'angle: The bottom of the lumbar pillow can be adjusted by 15 degrees up and down.

Figura 3: Detallada view of the adjustable lumbar support.

5.3. Ajust del reposabraços

The 360° mechanical armrests offer versatile support for your elbows and shoulders:

• Ajust d'alçada: Adjust vertically by 65 mm.
• Ajust de profunditat: Adjust forward and backward by 40 mm.
• Rotació: Rotate left and right by 40 degrees.
• Armrest Pad Angle: The armrest pads can be adjusted up and down by 20 degrees.
• Main Axis Rotation: The entire armrest assembly can rotate 360 degrees.

Figura 4: Detallada view of the multi-directional armrest.

5.4. Funció reclinable

The chair features a recline function for relaxation:

• The chair can recline from 90 degrees to 160 degrees.
• Use the recline lever, typically located on the right side under the seat, to adjust the backrest angle.
• The integrated footrest can be extended for full body support during recline.

Figure 5: Chair in a reclined position with footrest.

5.5. Ajust d'alçada del seient

Adjust the seat height to ensure your feet are flat on the floor and your knees are at a 90-degree angle:

• The seat height can be adjusted from 44 cm to 52.5 cm.
• Use the lever located under the seat (usually on the right side) to raise or lower the seat.

5.6. Weight-Sensing Seat Base

The chair features a weight-sensing seat base that automatically adjusts to fit your body, providing full-body support.

Figura 6: Intern view of the weight-sensing seat mechanism.

6. Manteniment

Regular maintenance will prolong the life and appearance of your AutoFull G5 chair:

• Neteja: Wipe mesh and frame surfaces with a soft, damp drap. Eviteu productes químics agressius o netejadors abrasius.
• Inspecció: Reviseu periòdicament tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
• Rodes: Mantingueu les rodes netes de cabells i restes per garantir un moviment suau.
• Eviteu la llum solar directa: Prolonged exposure to direct sunlight can cause material degradation and fading.

Figura 7: Example of the mesh material used in the chair.

7. Solució De Problemes

If you encounter issues with your AutoFull G5 chair, refer to the following common solutions:

• Chair is unstable/wobbly: Ensure all assembly screws are fully tightened. Check that the gas lift is properly seated in the star base and seat mechanism.
• Rodes que no giren suaument: Remove any hair or debris from the caster wheels. Ensure casters are fully inserted into the star base.
• Gas lift not adjusting height: Check if the height adjustment lever is fully engaged. Ensure no obstructions are preventing the gas lift from moving.
• Recline function not working: Verify that the recline lock mechanism is disengaged. Check for any obstructions in the recline mechanism.
• Armrests feel loose: Check the screws securing the armrests to the seat base and tighten if necessary.

If the problem persists after attempting these solutions, please contact AutoFull customer support.

8. Especificacions

9. Garantia i Suport

AutoFull provides a garantia de tres anys on all products. This warranty covers manufacturing defects and significant malfunctions under normal use.

Spare parts are readily available in our Japanese warehouses (Tokyo, Osaka) to ensure prompt support and peace of mind for our customers.

For any initial defects, incompatibilities, or questions regarding your product, please contact our customer service center. Our team is dedicated to assisting you.

Informació de contacte: Please refer to the contact details provided with your purchase documentation or visit the official AutoFull weblloc de suport.