Onlyone FC5090

Onlyone Water Dental Flosser FC5090 User Manual

Model: FC5090

Introducció

Thank you for choosing the Onlyone Water Dental Flosser. This device is designed to provide effective oral hygiene by using a pressurized stream of water to remove plaque and food debris from between teeth and below the gumline. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

Informació important de seguretat

ADVERTÈNCIA: llegiu totes les instruccions abans d'utilitzar aquest producte.

  • Use only a 5V/1A charger for safe charging. Avoid third-party chargers that exceed voltage o límits de corrent.
  • Charge the device in a cool, dry place away from heat sources (e.g., stoves, heaters, direct sunlight). Do not overcharge or charge for extended periods.
  • Plug and unplug the charging cable gently. Avoid bending or twisting the cable excessively. If the charging port is loose or damaged, stop use immediately.
  • Ensure the charging port is completely dry with the waterproof cover securely closed before charging.
  • Make sure to firmly insert the nozzle (completely covering the sealing rubber ring) to prevent water leakage.
  • This product is intended for oral cleaning only. Do not use for any other purpose.
  • Do not immerse the main unit in water for prolonged periods, despite its IPX7 rating.
  • Mantenir fora de l'abast dels nens.
  • Consulteu el vostre dentista abans d'utilitzar-lo si heu estat sotmès a una cirurgia oral o teniu una malaltia periodontal greu.

Components del producte

The Onlyone Water Dental Flosser package includes the following items:

  • 1 x Onlyone Water Dental Flosser Main Unit
  • 5 x Replacement Jet Tips (2 Standard, 1 Periodontal, 1 Orthodontic, 1 Tongue Cleaner)
  • 1 cable de càrrega USB (adaptador no inclòs)
  • 1 x Manual d'usuari (aquest document)
Onlyone Water Dental Flosser and accessories in packaging

Image: The Onlyone Water Dental Flosser main unit, its packaging, and the five included jet tips.

Configuració i primer ús

  1. Carregueu el dispositiu: Before first use, fully charge the water flosser.
    • Obriu la tapa del port de càrrega.
    • Connect the USB charging cable to the device and a 5V/1A USB power adapter (not included).
    • The charging indicator light will show charging status. A full charge takes approximately 3 hours and provides up to 30 days of use.
    • Ensure the charging port is dry before charging and close the cover securely after charging.
    Charging the Onlyone Water Dental Flosser with a USB cable

    Image: The water flosser connected to a charger, illustrating the charging process.

  2. Adjunta una punta de raig:
    • Select the desired jet tip (e.g., Standard, Periodontal, Orthodontic, Tongue Cleaner).
    • Insert the tip into the hole on the top of the flosser handle until it clicks into place. Ensure it is firmly seated to prevent leakage.
  3. Ompliu el dipòsit d’aigua:
    • Open the water tank cap on the back of the device.
    • Fill the 300ml tank with lukewarm water. Close the cap securely.
    • Alternatively, the tank can be detached for easier filling and cleaning.
    Filling the water tank of the Onlyone Water Dental Flosser

    Image: A person filling the water tank of the Onlyone Water Dental Flosser.

Instruccions de funcionament

  1. Posicionament: Lean over a sink and place the jet tip into your mouth, aiming the tip at the gumline at a 90-degree angle.
  2. Engegar i seleccionar el mode: Press the power button to turn on the device. Press the mode button to cycle through the 4 pressure settings:
    • Low (Soft): For sensitive teeth and first-time users.
    • Mitjà: For daily cleansing.
    • Alt: For thorough teeth cleaning.
    • Pols: For gentle gum massage and improved circulation.
    The device has a memory function and will start in the last used mode.
    Illustration of the four pressure settings on the Onlyone Water Dental Flosser

    Image: Close-up of the water flosser showing the power and mode buttons with indicators for Low, Medium, High, and Pulse settings.

  3. Tècnica del fil dental:
    • Mantingueu la boca lleugerament oberta perquè l'aigua flueixi cap a la pica.
    • Start with your back teeth and work your way forward. Glide the tip along the gumline, pausing briefly between teeth.
    • Clean both the inside and outside surfaces of your teeth.
    • The nozzle can rotate 360° for easy access to all areas of the mouth.
    Woman using Onlyone Water Dental Flosser for deep cleaning

    Image: A person demonstrating the use of the water flosser, showing the water stream cleaning between teeth.

  4. Apagar: Premeu el botó d'engegada de nou per apagar el dispositiu quan hàgiu acabat.

Video: A short demonstration of how to use the Onlyone Water Dental Flosser, showing the proper technique for cleaning teeth and gums.

Manteniment

Neteja del dipòsit d'aigua:

  • Després de cada ús, buideu l'aigua que quedi del dipòsit.
  • The tank can be detached from the main unit for thorough cleaning. Wash with mild soap and water, then rinse thoroughly.
  • Allow the tank to air dry before reattaching.

Cleaning the Jet Tips:

  • Remove the jet tip from the handle.
  • Rinse the tip under running water.
  • For deeper cleaning, soak tips in a solution of 2 parts water to 1 part white vinegar for 5-10 minutes, then rinse.
  • Replace jet tips every 3 months or sooner if they show signs of wear.

Neteja de la unitat principal:

  • Netegeu l'exterior del dispositiu amb un damp tela.
  • No utilitzeu netejadors abrasius ni productes químics durs.
  • Ensure the charging port cover is closed when cleaning the main unit.
Diagram showing how to fill and clean the detachable water tank

Image: Visual guide on how to easily fill the water tank and detach it for cleaning with a brush.

Resolució de problemes

ProblemaCausa possibleSolució
El dispositiu no s’encén.Bateria baixa.Carregueu el dispositiu completament.
Water leakage from the nozzle base.Jet tip not inserted correctly.Ensure the jet tip is firmly inserted until it clicks, fully covering the sealing rubber ring.
Pressió d'aigua feble.Low battery; clogged jet tip; incorrect mode selected.Charge the device; clean the jet tip; select a higher pressure mode.
El dispositiu deixa de funcionar inesperadament.Bateria esgotada.Recarrega el dispositiu.

Especificacions

  • Número de model: FC5090
  • Capacitat del dipòsit d'aigua: 300 ml
  • Configuració de pressió: 4 Modes (Low, Medium, High, Pulse)
  • Interval de pressió d'aigua: 50-150 PSI
  • Freqüència de pols: 1500-2000 pulsacions per minut
  • Bateria: 1 polímer de liti (inclòs)
  • Temps de càrrega: Aproximadament 3 hores
  • Temps d'ús: Up to 30 days on a single charge (based on typical use)
  • Classificació impermeable: IPX7
  • Dimensions del producte: 4.33 x 1.57 x 1.57 polzades
  • Pes: 13.76 unces
  • Font d'alimentació: Funciona amb bateria
  • Fabricant: Només un

Garantia i Suport

Onlyone products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Onlyone weblloc.

For assistance, please contact customer support via the retailer where the product was purchased or through the manufacturer's official channels.

© 2025 Onlyone. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.