OONO DIN Rail Mount AC 250V IEC320 C13 Double Receptacle Power Strip Module

1. Introducció

This manual provides instructions for the OONO DIN Rail Mount AC 250V IEC320 C13 Double Receptacle Outlet Power Strip Module, Model D-1589T. This module is designed for industrial and professional applications, offering two IEC320 C13 AC receptacles, a resettable rocker switch with a thermal circuit breaker for overload protection, and DIN rail mounting capability. It is intended for use with AC 250V systems.

2. Característiques del producte

• Double IEC320 C13 AC Receptacles: Features two 3-prong grounded IEC320 C13 AC outlets with reinforced design for enhanced stability.
• Vol. Operatiutage: Designed for AC 250V systems.
• Corrent nominal: Each receptacle is rated for 15 Amp (UL CSA) or 10 Amp (TUV CCC KC). The total output is limited to 15 Amps by the overload protector.
• Resettable Overload Protector: Inclou un 15 Amp resettable rocker switch thermal circuit breaker with a built-in red indicator light. This allows for manual ON/OFF control and automatic overcurrent protection.
• Terminals d'entrada: Features 7.62mm/0.3" pitch input terminals, supporting a maximum current of 30 Amps per position. Compatible with 26~10 AWG wire sizes, with a stripping length of 8mm. Uses Metric M3 slotted screws. Designed to support power supply expansion to other modules.
• Muntatge en carril DIN: Equipped with a carrier that supports standard 35mm DIN rails. Constructed from high-quality fireproof nylon material.
• Certificacions: UL CE certified DIN rail nylon material mount carrier. UL 94-V0 certified FR-4 fiberglass material PCB. UL CE CQC certified terminal blocks. UL CSA TUV CCC certified IEC320 C13 receptacle. UL certified circuit breaker.

3. Contingut del paquet

• 1x OONO DIN Rail Mount AC 250V IEC320 C13 Double Receptacle Power Strip Module (Model D-1589T)

4. Configuració i instal·lació

Follow these steps for proper installation of your OONO D-1589T module:

1. Muntatge en carril DIN:

   Align the module's DIN rail carrier with a standard 35mm DIN rail. Press the module firmly onto the rail until it clicks into place. Ensure it is securely fastened.

   

   Figure 4.1: The OONO D-1589T module securely mounted on a standard DIN rail.
2. Wiring Input Terminals:

   Connect your AC 250V power supply to the input terminals. The terminals are clearly marked L (Line), N (Neutral), and GND (Ground). Use 26~10 AWG wires, stripping 8mm of insulation. Ensure all connections are tight using a Metric M3 slotted screwdriver.

   

   Figura 4.2: Detallada view of the input terminals (L, N, GND) and the rocker switch with the RESET button.

   Refer to the wiring schematic for correct connections:

   

   Figure 4.3: Electrical schematic illustrating the internal wiring and connections for the module.

3. Dispositius de connexió:

   Plug your IEC320 C14 compatible devices into the two IEC320 C13 receptacles on the module.

   

   Figure 4.4: The module with its two IEC320 C13 outlets and the integrated rocker switch.

Guia de vídeo d'instal·lació

5. Instruccions de funcionament

The OONO D-1589T module features an integrated rocker switch with a thermal circuit breaker for power control and overload protection.

• Encès/apagat: Use the rocker switch to manually turn the power to the receptacles ON or OFF.
• Protecció de sobrecàrrega: The built-in thermal circuit breaker protects connected devices from overcurrent.
  • When operating normally, the red indicator light on the switch is illuminated, and the receptacles provide power.
  • If an overcurrent condition occurs, the overload protector will trip, disconnecting power to the receptacles. The red indicator light will turn off.
• Resetting the Circuit Breaker: After an overload trip, identify and resolve the cause of the overcurrent. Then, press the rocker switch to the RESET position to restore power.

6. Manteniment

To ensure optimal performance and longevity of your OONO D-1589T module, follow these maintenance guidelines:

• Inspecció periòdica: Periodically inspect the module for any signs of physical damage, loose connections, or discoloration.
• Neteja: Ensure the module is disconnected from power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Condicions ambientals: Operate the module within its specified environmental conditions to prevent premature wear or malfunction.
• Integritat de la connexió: Periodically check the tightness of the input terminal screws to prevent arcing or poor contact.

7. Solució De Problemes

If you encounter issues with your OONO D-1589T module, refer to the following troubleshooting steps:

8. Especificacions

Figure 8.1: Dimensional drawing of the OONO D-1589T module, showing key measurements in millimeters.

9. Garantia i Suport

For warranty information and technical support, please refer to the product packaging or contact OONO customer service directly. Keep your purchase receipt for warranty claims.