1. Informació important de seguretat
Before operating your AMIGO E-Lagos T3 electric bicycle, please read and understand all instructions and safety warnings. Failure to follow these instructions may result in serious injury or damage to the bicycle.
- Portar un casc: Utilitzeu sempre un casc de bicicleta homologat quan conduïu.
- Comprovació prèvia a la conducció: Before each ride, inspect the brakes, tires, lights, and ensure all quick releases and fasteners are secure.
- Lleis de trànsit: Obey all local traffic laws and regulations. Ride defensively and be aware of your surroundings.
- Condicions meteorològiques: Exercise caution when riding in wet conditions, as braking distance may increase. Avoid riding in heavy rain or snow.
- Límit de pes: Do not exceed the maximum load capacity of the bicycle.
- Components elèctrics: Keep electrical components dry. Do not submerge the bicycle or battery in water.
- Nens: This electric bicycle is intended for adult use.
2. Configuració i preparació inicial
Your AMIGO E-Lagos T3 electric bicycle may require some minor assembly and preparation before its first use.

Figure 2.1: The AMIGO E-Lagos T3 Electric Bicycle, ready for use.
2.1 Desembalatge i muntatge
- Traieu amb cura la bicicleta del seu embalatge.
- Install the pedals: Ensure pedals are threaded correctly (L for left, R for right) and tightened securely.
- Adjust the handlebar and saddle height for a comfortable and safe riding position. Ensure all quick-release levers are firmly closed.
2.2 Càrrega de la bateria
The battery is integrated into the rear rack and is removable for charging.
- Localitza el port de càrrega a la bateria.
- Connect the charger to the battery, then plug the charger into a standard wall outlet.
- The charging time is approximately 5.5 to 7.5 hours for a full charge.
- No deixeu la bateria carregant-se sense supervisió durant períodes prolongats.
2.3 Inflat dels pneumàtics
Ensure tires are inflated to the recommended pressure, typically found on the tire sidewall. Proper inflation improves ride quality and prevents punctures.
3. Instruccions de funcionament
Familiarize yourself with the controls and functions of your E-Lagos T3 electric bicycle for an optimal riding experience.
3.1 Engegada/Apagada i Visualització

Figure 3.1: The Ananda D15 LED display on the left handlebar, showing battery level and assistance mode.
- Per encendre: Press and hold the power button on the Ananda D15 LED display (located on the left handlebar).
- Assistance Levels: Use the '+' and '-' buttons on the display to select one of the 5 available pedal assistance levels. Level 1 provides minimal assistance, while Level 5 provides maximum assistance.
- Per apagar: Premeu i manteniu premut el botó d'engegada de nou fins que la pantalla s'apagui.
- The display shows battery charge status and current assistance level.
3.2 Canvi de marxes

Figure 3.2: The Shimano Nexus 7-speed grip shifter on the right handlebar.
Your E-Lagos T3 is equipped with a Shimano Nexus 7-speed internal gear hub. Shift gears using the grip shifter on the right handlebar. Shift to a lower gear for easier pedaling on inclines and a higher gear for faster speeds on flat terrain.
3.3 Sistema de frenada
The bicycle features a V-Brake on the front wheel and a coaster brake (backpedal brake) on the rear wheel.
- Fre davanter: Operated by the lever on the left handlebar. Use for controlled stopping power.
- Rear Brake (Coaster Brake): Activated by pedaling backward. Provides reliable stopping for the rear wheel.
- Always apply both brakes simultaneously for effective and safe stopping.
3.4 Bloqueig del manillar

Figure 3.3: The handlebar lock mechanism, used to stabilize the front wheel when parked.
The integrated handlebar lock helps stabilize the front wheel when the bicycle is parked, especially when loaded with items on the front rack. Rotate the mechanism to 'LOCK' to secure the handlebar, and to 'FREE' to allow steering.
3.5 Sistema d'il·luminació
The E-Lagos T3 is equipped with LED lights for both front and rear visibility.

Figure 3.4: The front rack with the integrated LED headlight for improved visibility.
- The lights are powered by the main battery.
- Turn on the lights using the dedicated button on the display or as instructed by the display manual.
- Ensure lights are functional before riding in low-light conditions.
4. Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur de la teva bicicleta elèctrica.
4.1 Cura de la bateria
- Carregueu la bateria regularment, fins i tot si no l'esteu fent servir, per mantenir-ne el bon estat.
- Guardeu la bateria en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Eviteu esgotar completament la bateria abans de tornar-la a carregar.
4.2 Neteja
Neteja la bicicleta amb anuncisamp drap i sabó suau. Eviteu utilitzar rentadores d'alta pressió directament sobre components elèctrics o rodaments.
4.3 Brakes and Tires
- Reviseu regularment les pastilles de fre per detectar el desgast i substituïu-les quan sigui necessari.
- Ensure brake cables are not frayed and are properly adjusted.
- Mantingueu la pressió correcta dels pneumàtics tal com s'indica al flanc del pneumàtic.
4.4 Cadena i transmissió
Keep the chain clean and lubricated for smooth operation and to prevent premature wear. The Shimano Nexus internal gear hub requires minimal maintenance but should be checked periodically by a professional.

Figure 4.1: The AXA Solid Plus ring lock provides integrated security for the rear wheel.
5. Solució De Problemes
This section addresses common issues you might encounter with your AMIGO E-Lagos T3 electric bicycle.
| Problema | Causa possible | Solució |
|---|---|---|
| El motor no ajuda | Battery low or depleted; System not powered on; Assistance level set to 0. | Charge battery; Power on the system via display; Increase assistance level. |
| Els llums no funcionen | Lights turned off; Battery low. | Turn on lights via display; Charge battery. |
| Els frens es senten febles | Brake pads worn; Cables loose; Improper adjustment. | Inspect and replace brake pads; Adjust brake cables; Consult a bicycle mechanic. |
| Sorolls inusuals de la transmissió | Dry or dirty chain; Loose components. | Clean and lubricate chain; Check for loose bolts or components. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support or a qualified bicycle mechanic.
6. Especificacions
Detailed technical specifications for the AMIGO E-Lagos T3 Electric Bicycle.

Figure 6.1: The Ananda M129 front hub motor provides pedal assistance.
| Característica | Especificació |
|---|---|
| Nom del model | E-Lagos T3 |
| Mida del marc | 50 cm |
| Mida de la roda | 28 polzades (71 cm) |
| Material del marc | Alumini |
| Engranatges | 7-speed Shimano Nexus (internal gear hub) |
| Tipus de motor | Ananda M129 Front Hub Motor |
| Sensor d'assistència al pedal | Rotational sensor |
| Capacitat de la bateria | 468 Wh (36V, 13Ah) Greenway YJ-145 Lithium-ion |
| Posició de la bateria | Integrated into rear rack, removable |
| Temps de càrrega | 5.5 - 7.5 hores |
| Interval | 45 - 120 km (approx. 65 km average) |
| Velocitat màxima (assistiva) | 25 km/h |
| Mostra | Ananda D15 LED (5 assistance levels) |
| Fre davanter | V-Brake |
| Fre posterior | Coaster Brake (backpedal brake) |
| Llums | LED frontal i posterior |
| Accessoris | Double kickstand, closed chain guard, front and rear luggage racks, luggage straps, handlebar lock, bell, AXA Solid Plus ring lock |
| Pes | Aprox. 29 kg |

Figure 6.2: The Shimano Nexus 7-speed internal gear hub and coaster brake on the rear wheel.
7. Garantia i Suport
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or spare parts, please contact the AMIGO customer service department or your authorized dealer.







