ROBOTIME TG507

ROBOTIME Big Ben 3D Wooden Puzzle with LED Light

Model: TG507

Introducció

Thank you for choosing the ROBOTIME Big Ben 3D Wooden Puzzle. This kit allows you to construct a detailed model of the iconic Big Ben, complete with an integrated LED light feature. Designed for adults and teens, this puzzle provides an engaging and educational building experience, fostering hand-eye coordination and intellectual development. Once assembled, the model serves as an elegant decorative piece, illuminating any space with its warm glow.

Producte acabatview

Components

  • 220 precision laser-cut wooden pieces.
  • LED light module.
  • Detailed instruction manual.

No additional tools or glue are required for assembly. Please note that batteries for the LED light are not included and must be prepared separately.

Dimensions muntades

Aproximadament 3.9 cm (llargada) x 4.2 cm (amplada) x 7.5 cm (alçada).

Diagram showing the assembled dimensions of the Big Ben 3D wooden puzzle, measuring 3.9 inches by 4.2 inches by 7.5 inches.

Figure 1: Assembled Product Dimensions

Informació de seguretat

  • Aquest producte conté peces petites i no és adequat per a nens menors de 3 anys a causa del perill d'asfíxia.
  • Recommended age for assembly is 14 years and older. Adult supervision is advised for younger users.
  • Handle wooden pieces with care as some delicate parts may be fragile.
  • Ensure proper battery installation for the LED light module. Do not mix old and new batteries, or different types of batteries.

Instruccions de muntatge

Follow the step-by-step visual instructions provided in the included manual. The pieces are laser-cut for precision and designed to interlock without glue. Refer to the part list and illustrations for guidance.

Passos generals:

  1. Carefully punch out the wooden puzzle pieces from their sheets.
  2. Identify the pieces required for each step using the provided diagrams.
  3. Assemble the components by interlocking them as shown in the illustrations.
  4. Integrate the LED light module during the specified assembly stages.
  5. Ensure all connections are secure but avoid excessive force to prevent breakage.
Image showing a person assembling the Big Ben wooden puzzle, with various laser-cut wooden pieces laid out and an instruction manual visible.

Figure 2: Assembly Process Overview

Four-panel image illustrating the assembly process: beautiful packaging, following the English instruction manual, popping out puzzle pieces, and building the craft kit.

Figure 3: Detailed Assembly Steps

Guia de vídeo de muntatge

Video 1: Official ROBOTIME 3D Wooden Puzzle Assembly Guide. This video demonstrates the general process of assembling ROBOTIME 3D wooden models, providing visual assistance for construction.

Operating Instructions (LED Light)

The Big Ben model includes an LED light feature to enhance its display. To activate the lights:

  1. Ensure the LED light module is correctly installed within the model during assembly.
  2. Insert the required batteries (not included) into the designated battery compartment. Refer to the assembly manual for battery type and placement.
  3. Locate the power switch on the model's base or integrated into the wiring.
  4. Toggle the switch to the 'ON' position to illuminate the model.
The fully assembled ROBOTIME Big Ben 3D wooden puzzle, illuminated with warm LED lights, standing on a table.

Figure 4: Illuminated Big Ben Model

Manteniment

  • Keep the model in a dry environment to prevent warping or damage to the wooden pieces.
  • Clean the model gently with a soft, dry cloth to remove dust. Avoid using liquid cleaners.
  • If the LED lights dim or stop working, replace the batteries.
  • Store the model away from direct sunlight to prevent fading of the wood.

Resolució de problemes

ProblemaCausa possibleSolució
Pieces break during assemblyExcessive force; delicate parts.Handle pieces gently. If a piece breaks, a small amount of wood glue can be used for repair.
La llum LED no s'encénNo batteries; incorrect battery installation; depleted batteries; loose connection.Ensure batteries are inserted correctly and are not depleted. Check all wiring connections for the LED module.
Les peces no encaixenIncorrect orientation; burrs on edges.Verify piece orientation with the manual. Gently sand any rough edges if necessary.

Especificacions

  • Marca: ROBOTIME
  • Model: TG507 (Big Ben)
  • Material: Fusta
  • Nombre de peces: 220
  • Mida muntada: 3.9 x 4.2 x 7.5 polzades
  • Power Source (LED): Bateria (no inclosa)
  • Mode de funcionament: Manual Assembly
  • Edat recomanada: 14+ anys
  • Objectiu educatiu: Hand-Eye Coordination, Creativity

Garantia i Suport

ROBOTIME is committed to providing high-quality products. If you encounter any problems with your Big Ben 3D Wooden Puzzle, please do not hesitate to contact our customer service team. We are dedicated to offering professional after-sales support to ensure your satisfaction.

For assistance, please refer to the contact information provided on the product packaging or visit the official ROBOTIME weblloc.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.