Introducció
This manual provides essential information for the proper installation, operation, and maintenance of your Hertz HRC 02 Remote Sub Level Control. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
Informació de seguretat
- Desconnecteu sempre la bateria del vehicle abans de realitzar qualsevol treball elèctric.
- Ensure all wiring is correctly routed and secured to prevent damage or interference.
- Do not install the control in a location that obstructs the driver's view or interferes with vehicle operation.
- Consulteu un instal·lador professional si no teniu clars els passos d'instal·lació.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Hertz HRC 02 Remote Sub Level Control Unit
- Suport de muntatge
- Cargols de muntatge
- Adhesive Tape (for surface mounting)
Configuració i instal·lació
The Hertz HRC 02 offers versatile mounting options:
- Connexió a Ampmés viu:
Locate the remote level control input on your compatible Hertz Deici Power Amplifier. Connect the cable from the HRC 02 control unit to this input. Ensure the connector is fully seated.
Figura 2: The HRC 02 control unit with its integrated connection cable, ready to be plugged into a compatible ampmés viu. - Surface Mounting with Tape:
Clean the desired mounting surface thoroughly. Apply the provided adhesive tape to the back of the HRC 02 control unit or its mounting bracket. Press firmly onto the surface for secure adhesion.
- Surface Mounting with Screws:
Position the mounting bracket in the desired location. Mark the screw holes. Drill pilot holes if necessary, then secure the bracket using the provided screws. Attach the HRC 02 control unit to the secured bracket.
- Muntatge a ras:
For a clean, integrated look, the HRC 02 can be flush mounted. This requires cutting an appropriate-sized hole in the mounting surface. Insert the control unit into the hole and secure it from behind using the provided hardware (e.g., retaining ring, screws, or bracket as shown in Figure 1).
Figura 3: An illustration demonstrating the flush mounting method for the HRC 02, where the control knob sits neatly within the mounting surface.
Instruccions de funcionament
The Hertz HRC 02 is designed for simple operation:
- Adjusting Subwoofer Level: Rotate the knob clockwise to increase the subwoofer output level (bass).
- Rotate the knob counter-clockwise to decrease the subwoofer output level (bass).
Manteniment
To ensure the longevity and proper function of your HRC 02:
- Clean the control unit periodically with a soft, dry cloth.
- Eviteu utilitzar productes químics aggressivs o netejadors abrasius.
- Ensure the control is not exposed to excessive moisture or extreme temperatures.
Resolució de problemes
- No Subwoofer Output:
- Check the connection cable between the HRC 02 and the ampmés viu.
- Assegureu-vos el ampel lifier està encès i funciona correctament.
- Verify the HRC 02 knob is not turned completely down.
- Control intermitent:
- Inspect the connection cable for any damage or loose connections.
- Ensure the control unit is securely mounted and not experiencing excessive vibration.
Especificacions
| Característica | Especificació |
|---|---|
| Número de model de l'article | HRC 02 |
| Dimensions del producte | 4.33 x 3.15 x 2.17 polzades |
| Pes de l'article | 4.6 unces |
| Fabricant | Hertz |
Garantia i Suport
The Hertz HRC 02 comes with a 1-Year Manufacturer Warranty. For warranty claims or technical support, please contact your authorized Hertz dealer or visit the official Hertz weblloc per obtenir més ajuda.