Veement V5F Type-C Dash Cam Hardwire Kit User Manual

1. Producte acabatview

The Veement V5F Type-C Dash Cam Hardwire Kit provides a continuous power supply to your dash camera, enabling features like 24-hour parking monitoring and low voltage protection. This kit converts 12V-24V vehicle power to 5V 3A, suitable for compatible Veement dash cam models including V200, V200Pro, V300, S80, and VT10.

Característiques principals:

• Volum baixtage Protecció: Volum de tall ajustabletage to prevent vehicle battery drain.
• Monitor d'aparcament les 24 hores: Provides constant power for continuous surveillance even when the vehicle is off.
• Multiple Safety Design: Includes protection against short circuits, overheating, and cable reversal.
• Automatic Engine Detection: Enables the dash cam to record without manual setting based on engine status.
• Upgraded Type-C Connector: Offers stronger power supply capacity, faster charging, and improved durability.

Figure 1: Multi-Protection Features of the Hardwire Kit

Figure 2: Upgraded Type-C Connector Benefits

2. Guia d'instal·lació

Avís de seguretat important:

• Professional installation of the hardwire kit is strongly recommended. Veement is not responsible for any product or vehicle damage, or personal injuries resulting from improper installation.
• Ensure the vehicle's ignition is OFF before beginning installation.
• Use appropriate tools to test and confirm polarity and grounding before finalizing connections.
• Do not use fuse slots connected to critical vehicle components, such as airbags, for safety reasons.

Components:

• Veement V5F Hardwire Kit (Type-C connector)
• 4 x Fuse Taps (Micro Mini, Mini, Small, Medium)

Instruccions de cablejat:

1. Identify Fuse Box: Locate your vehicle's fuse box. Refer to your vehicle's owner's manual to identify suitable fuse slots.
2. Seleccioneu les preses de fusibles: The kit includes four types of fuse taps. Select the appropriate type that matches your vehicle's fuse box.
3. Connect Yellow Wire (BAT): Connect the yellow wire of the hardwire kit to a constant fuse slot in the fuse box. This slot provides power even when the engine is off, essential for parking surveillance.
4. Connect Red Wire (ACC): Connect the red wire to an ACC (Accessory) fuse slot. This slot only receives power when the vehicle's ignition is on.
5. Connect Black Wire (GND): Securely attach the black wire to a metal ground bolt or screw on the vehicle's chassis. Ensure a good electrical connection.
6. Cable de ruta: Carefully route the hardwire cable from the fuse box to the dash camera's mounting location, tucking it neatly behind trim panels to maintain a clean interior.
7. Connecteu-vos a la Dash Cam: Plug the Type-C connector of the hardwire kit into your compatible Veement dash camera.

Figure 3: Hardwire Kit Wired Connection Diagram

Figure 4: Included Fuse Tap Types

3. Instruccions de funcionament

Setting Cut-Off Voltage Protecció:

The Veement V5F Hardwire Kit features adjustable low voltage protection to prevent your vehicle's battery from draining completely.

1. Activa la pantalla: Long press any button on the hardwire kit for 3 seconds. The LED display will illuminate.
2. Ajust Voltage: Use the '+' and '-' buttons on the hardwire kit to set your desired cut-off voltage. A recommended setting is 11.8V.
3. Confirmeu la configuració: Després de seleccionar el voltage, wait for the LED display to flash three times. This indicates the setting has been saved.

When the vehicle's voltage drops below the set cut-off value, the hardwire kit will automatically stop power output after 1 minute to protect the battery.

Figure 5: Adjustable Low Voltage Protection Interface

24-Hour Parking Surveillance:

To enable continuous parking monitoring, ensure the hardwire kit is correctly installed and configured.

1. Verifica la connexió: Confirm the hardwire kit is correctly connected to both constant and ACC fuse slots as per the installation guide.
2. Dash Cam Settings: Access your dash camera's menu. Navigate to Configuració > Guardia d'aparcament i posa-ho a ON.
3. Time-Lapse Recording (Optional): For efficient storage, you may enable time-lapse recording. Go to Configuració > Time-lapse i posa-ho a ON. This compresses video footage (e.g., 30 minutes of video into 1 minute).

When the vehicle's engine is turned off, the dash cam will automatically enter parking monitor mode.

Figure 6: 24-Hour Parking Monitoring in Action

Automatic Engine Detection:

The 3-in-1 cable design of the hardwire kit automatically detects the engine's status, allowing the dash cam to switch between normal recording and parking mode without manual intervention.

Figure 7: Automatic Engine Status Detection Wiring

4. Manteniment

To ensure optimal performance and longevity of your Veement V5F Hardwire Kit, consider the following maintenance tips:

• Inspecció periòdica: Periodically check all cable connections (fuse box, ground, dash cam) to ensure they are secure and free from corrosion or damage.
• Gestió de cables: Ensure cables are not pinched, frayed, or exposed to excessive heat or sharp edges. Proper routing helps prevent wear and tear.
• Neteja: Keep the hardwire kit module and dash cam free from dust and debris. Use a soft, dry cloth for cleaning.
• Actualitzacions de programari: Regularly check for firmware updates for your compatible Veement dash camera, as these may include improvements related to power management and parking mode functionality.

5. Solució De Problemes

If you encounter issues with your Veement V5F Hardwire Kit, refer to the following common problems and solutions:

Problem: Dash Cam Does Not Power On

• Comproveu les connexions: Ensure all wires (Yellow BAT, Red ACC, Black GND) are securely connected to their respective points in the fuse box and chassis.
• Verificar els fusibles: Check the fuses in the fuse taps and the vehicle's fuse box. Replace any blown fuses.
• Potència de prova: Use a multimeter to confirm that the selected fuse slots are providing power (constant for BAT, ignition-switched for ACC).
• Dash Cam Compatibility: Ensure your dash cam is a compatible Veement model (V200, V200Pro, V300, S80, VT10) and that its Type-C port is functional.

Problem: 24-Hour Parking Mode Not Activating

• Constant Power Check: Verify that the yellow wire (BAT) is connected to a fuse slot that provides continuous power even when the ignition is off.
• ACC Power Check: Confirm the red wire (ACC) is connected to a fuse slot that only receives power when the ignition is on. The dash cam uses the change in power status to detect engine off.
• Dash Cam Settings: Double-check that 'Parking Guard' is enabled in your dash camera's settings menu.
• Volum baixtage Tall: Si la bateria del vehicle voltage is already below the set cut-off value, the hardwire kit will not supply power for parking mode. Charge your vehicle battery.

Problem: Vehicle Battery Drains

• Adjust Cut-Off Voltage: Assegureu-vos que el baix voltage cut-off is set appropriately (e.g., 11.8V for 12V systems). A lower setting might allow the battery to drain too much.
• Vehicle Battery Health: A weak or old vehicle battery may struggle to support parking mode for extended periods. Consider having your battery tested.
• Dash Cam Power Consumption: Some dash cam features (e.g., high resolution, Wi-Fi) consume more power. Adjust dash cam settings if battery drain is excessive.

6. Especificacions

7. Informació de la garantia

The Veement V5F Hardwire Kit comes with a 12-Month Replacement Service i a Garantia de reemborsament de 45 dies. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the product packaging or contact Veement customer support.

8. Atenció al client

If you have any questions, require assistance with installation, or need troubleshooting support, please do not hesitate to contact Veement customer service. You can typically find contact information on the product packaging, the official Veement weblloc web o a través de la vostra plataforma de compra.

When contacting support, please provide your product model (V5F) and a detailed description of the issue to help us assist you more efficiently.