Introducció
This manual provides instructions for the installation and operation of your Wisoqu DAB Digital Car Radio Aerial Antenna. This antenna is designed to enhance digital audio broadcasting (DAB) and DAB+ signal reception in your vehicle, featuring a high-conductivity FPC antenna and an MCX male connector for easy integration.
Característiques
- Strong Signal Reception: Designed for robust and clear digital radio signal reception with good directivity.
- High Conductivity FPC Antenna: Utilizes a flexible printed circuit (FPC) antenna with high conductivity and a low temperature coefficient for optimal receiving performance.
- Instal·lació Plug and Play: Offers a fast and straightforward installation process, enabling lossless signal gain without complex wiring.
- Disseny portàtil i compacte: Its small and lightweight form factor allows for easy placement and portability within the vehicle.
- MCX Male Connector: Equipped with an MCX male connector for simple and convenient connection to compatible car radio units.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- 1 x Wisoqu DAB Aerial Antenna (MCX Male)
Image: The Wisoqu DAB Digital Car Radio Aerial Antenna, showing the main antenna unit, the 3-meter (118.11-inch) cable, and the MCX connector. The antenna unit is designed for discreet placement.
Instal·lació
The Wisoqu DAB Digital Car Radio Aerial Antenna is designed for fast and easy installation using a patching method. It can be installed under the windshield of the rear window or under the windshield of the front window.
- Trieu una ubicació: Select a suitable location on your car's windshield (front or rear) that allows for optimal signal reception and does not obstruct your view. Ensure the surface is clean and dry.
- Prepara la superfície: Clean the chosen area thoroughly with an alcohol wipe to remove any dust, grease, or debris. Allow it to dry completely.
- Connecteu l'antena: Carefully peel the protective backing from the adhesive patch on the FPC antenna. Press the antenna firmly onto the cleaned surface, ensuring good contact.
- Encamina el cable: Route the 3-meter cable discreetly along the vehicle's interior trim to your car radio unit. Ensure the cable is not pinched or exposed to excessive heat.
- Connecta't a la ràdio: Plug the MCX male connector into the corresponding MCX input on your DAB-compatible car radio.
Image: The DAB Digital Car Radio Aerial Antenna installed on the inside of a car's front windshield, demonstrating its discreet placement and how it receives strong signals.
Imatge: Un primer pla view of the MCX male connector, highlighting its design for easy and secure connection to a compatible car radio input.
Funcionament
Once installed and connected, the Wisoqu DAB Digital Car Radio Aerial Antenna operates automatically to receive DAB and DAB+ signals. Ensure your car radio is set to the DAB/DAB+ mode and perform a station scan if necessary to find available digital radio stations.
- Estabilitat del senyal: The antenna's design ensures high stability, meaning the car's driving signal should not be affected when adjusting the radio.
- Col·locació òptima: For best performance, ensure the antenna is placed in an area with minimal obstruction and away from other electronic devices that might cause interference.
Manteniment
The Wisoqu DAB Digital Car Radio Aerial Antenna requires minimal maintenance. Keep the antenna unit and cable clean and free from dust or debris. Avoid applying excessive force or bending the FPC antenna excessively, as this may damage the internal components.
- Neteja: Use a soft, dry cloth to gently wipe the antenna unit and cable if needed. Do not use harsh chemicals or abrasive cleaners.
- Inspecció: Periodically check the cable and connector for any signs of wear or damage. Ensure the adhesive patch remains securely attached to the windshield.
Resolució de problemes
If you experience issues with your DAB Digital Car Radio Aerial Antenna, refer to the following common troubleshooting steps:
- Sense senyal o senyal feble:
- Ensure the MCX connector is securely plugged into your car radio's DAB input.
- Verify that your car radio is correctly set to DAB/DAB+ mode.
- Perform a station scan on your car radio to search for available digital stations.
- Check the antenna's placement. Obstructions or metallic tints on the windshield can affect reception. Try repositioning if possible.
- Ensure the antenna's adhesive is fully attached to the glass.
- Senyal intermitent:
- This can be caused by environmental factors such as tunnels, tall buildings, or remote areas with limited DAB coverage.
- Check for loose connections at the MCX plug.
- L'antena no s'enganxa:
- Ensure the windshield surface was thoroughly cleaned and dry before installation.
- Apply firm, even pressure when attaching the antenna to ensure proper adhesion.
Especificacions
| Especificació | Valor |
|---|---|
| Corrent de treball | 30mA - 60mA |
| Impedància de sortida | 50/75 Ω |
| Tipus de connector | MCX Masculí |
| Operating Temperature (Dynamic) | -20 °C ~ +60 °C |
| Storage Temperature (Static) | -40 °C ~ +85 °C |
| Longitud del cable | 3 m (118.11 polzades) |
| Vol. Operatiutage | DC5V/DC12V |
| Freqüència de funcionament | 170MHz to 240MHz (Band III), 1452MHz to 1492MHz (L-Band) |
| Guany de sortida | 15dB ± 3dB (Band III), 18dB ± 3dB (L-Band) |
| Mètode d'instal·lació | Patching (Adhesive) |
| VSWR | ≤2 |
| NS | ≤ 2dB |
| Dimensions del producte | 7.48 x 5.12 x 0.79 polzades |
| Pes de l'article | 2.12 unces |
| Número de model | Wisoqun057o2syi6 |
Imatge: Una imatge detallada view of the Wisoqu DAB antenna, showing the main active antenna unit, the MCX connector, and the adhesive patch for installation.
Garantia i Suport
For warranty information or technical support, please refer to the retailer where the product was purchased or visit the official Wisoqu weblloc web. Conserveu el rebut de compra com a comprovant de compra.
Fabricant: Wisoqu
ASIN: B0DBZWV72N
Data de primera disponibilitat: 2 d'agost de 2024