1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hertz HMD1 Marine Mono Amplifier and HMS 10 S2-LD-SW Marine Subwoofer System. Please read this manual thoroughly before attempting installation or operation to ensure proper function and safety. This system is designed for marine environments, offering high-power audio performance and durability.
2. Informació de seguretat
Observeu sempre les següents precaucions de seguretat per evitar lesions o danys a l'equip:
- Font d'alimentació: Assegureu-vos que la font d'alimentació voltage matches the specified requirements (11-15 VDC). Incorrect voltage pot danyar el ampmés viu.
- Cablejat: Use appropriate gauge wiring for power, ground, and speaker connections. Improper wiring can lead to overheating or electrical fire.
- Fusibles: El amplifier is equipped with dual 30A fuses. Always replace fuses with the same type and rating. Never bypass fuses.
- Muntatge: Securely mount all components in a location that is protected from direct water exposure, excessive heat, and vibration. Ensure adequate ventilation for the ampmés viu.
- Exposició a l'aigua: While designed for marine use, avoid submerging components. Ensure all connections are watertight.
- Instal·lació professional: If you are unsure about any aspect of installation, consult a qualified marine audio technician.
3. Producte acabatview
The Hertz HMD1 Marine Mono Amplifier and HMS 10 S2-LD-SW Marine Subwoofer System is engineered for robust audio performance in marine applications.
Hertz HMD1 Marine Mono Ampmés viu
The HMD1 is a compact, high-power mono amplifier designed to deliver consistent performance. It features a robust power output, low distortion, and a high signal-to-noise ratio, making it suitable for driving subwoofers in marine environments.
Figura 1: Angle view of the Hertz HMD1 Marine Mono Amplifier, showing its compact design and heat sink fins.
Figure 2: Rear panel of the Hertz HMD1 amplifier, detailing power, speaker, and input connections, along with control switches.
Hertz HMS 10 S2-LD-SW Marine Subwoofer
The HMS 10 S2-LD-SW subwoofers are engineered for high-power, infinite-baffle operation, eliminating the need for a dedicated enclosure. They feature durable polypropylene cones with UV inhibitors, high-density flux ferrite magnets, and integrated RGB LEDs for customizable lighting effects. The white sport grilles are paintable to match your vessel's aesthetics.
Figure 3: Hertz HMS 10 S2-LD-SW Marine Subwoofer featuring a white sport grille and integrated RGB LEDs.
4. Configuració i instal·lació
Careful installation is crucial for optimal performance and longevity of your marine audio system.
4.1 AmpMuntatge de lifier
Trieu una ubicació de muntatge seca, ben ventilada i protegida de la llum solar directa i la calor excessiva. Assegureu-vos que hi hagi prou espai al voltant amplifier for air circulation. Secure the amplifier using appropriate fasteners to a solid surface.
4.2 Wiring Connections (HMD1 Ampmés viu)
Refer to Figure 2 for connection points.
- Power (POWER - 12V): Connect the positive (+) terminal to the boat's 12V battery via a fused power cable. Connect the negative (-) terminal to a solid ground point on the boat's chassis or battery negative. Use heavy-gauge wire suitable for the current draw.
- Fuses (FUSE 2x30A): El amplifier is protected by two 30A blade fuses. Ensure these are correctly installed.
- Speaker Out (SPEAKER OUT 1, 2): Connect your subwoofers to these terminals. The HMD1 is a mono amplifier, so both subwoofers should be wired in parallel to achieve a 1-Ohm or 2-Ohm load, depending on the subwoofer impedance. For two 2-Ohm subwoofers, wiring them in parallel will result in a 1-Ohm load.
- SPK IN / REM IN / MUTE: These terminals are for speaker-level inputs and remote turn-on/mute functions.
- PRE IN (RCA): Connect your head unit's RCA pre-out to this input for a low-level signal.
- SENSITIVITY (H, M, L): This switch adjusts the input sensitivity. Set it to match the output level of your head unit.
- ART ON/OFF: Automatic Remote Turn-on. When ON, the amplifier will turn on automatically when it detects an audio signal on the speaker-level inputs. When OFF, a remote turn-on wire is required.
- LINK ON/OFF: Used for linking multiple amplifiers. Refer to advanced wiring diagrams if using this feature.
4.3 Subwoofer Installation (HMS 10 S2-LD-SW)
The HMS 10 S2-LD-SW subwoofers are designed for infinite-baffle applications, meaning they do not require a sealed enclosure. They can be mounted directly into a panel or bulkhead, using the boat's interior volume as the 'enclosure'.
- Lloc de muntatge: Choose a sturdy, flat surface with sufficient depth clearance (refer to specifications for dimensions). Ensure the mounting surface is rigid enough to prevent vibrations.
- Retall: Carefully cut the mounting hole according to the specified diameter.
- Cablejat: Connecteu els terminals del subwoofer a amplifier's speaker outputs. Ensure correct polarity (+ to + and - to -). For two 2-Ohm subwoofers, wire them in parallel to the HMD1 amplifier for a 1-Ohm load.
- RGB LED Wiring: Connect the RGB LED wires to a compatible RGB controller (not included) for customizable lighting effects. Follow the controller's instructions for wiring.
- Instal·lació de la graella: Secure the white sport grille over the subwoofer. The grille can be painted to match your vessel's color scheme.
Figure 4: Physical dimensions diagram for the Hertz HMS 10 S2-LD-SW Subwoofer, showing measurements A, B, C, D, and F.
5. Instruccions de funcionament
5.1 Engegada/apagada
El amplifier will power on when a remote turn-on signal is received (either from the head unit's remote output or via the ART function if enabled). It will power off when this signal is removed.
5.2 Adjusting Sensitivity (Gain)
The SENSITIVITY switch on the HMD1 amplifier allows you to match the amplifier's input level to the output level of your head unit. Start with the switch in the 'L' (Low) position and gradually increase it to 'M' (Medium) or 'H' (High) if needed. Adjust the gain control on the amplifier (if present, not explicitly detailed in provided data) to achieve maximum clean output without distortion. It is recommended to set the head unit volume to about 75% of maximum, then adjust the amplifier gain until the sound is loud and clear without audible distortion. If distortion occurs, reduce the gain.
Control de LED RGB 5.3
The integrated RGB LEDs in the HMS 10 S2-LD-SW subwoofers require an external RGB controller (not supplied) for operation. Connect the subwoofer's RGB wiring to the controller according to the controller's instructions. This allows for customization of color and lighting effects.
6. Manteniment
Regular maintenance ensures the longevity and optimal performance of your marine audio system.
- Neteja: Netegeu periòdicament el amplifier and subwoofers with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure all components are dry before operation.
- Inspecció de connexió: Annually inspect all power, ground, speaker, and signal connections for corrosion, looseness, or damage. Tighten any loose connections and clean any corrosion.
- Substitució de fusibles: Si el amplifier fails to power on, check the 30A fuses. Replace blown fuses only with fuses of the same type and rating.
- Controls ambientals: Assegureu-vos el amplifier's mounting area remains well-ventilated and free from obstructions. Verify that subwoofers are securely mounted and grilles are intact.
7. Solució De Problemes
If you experience issues with your system, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Ampel lifier no s'encén | Fusible cremat Connexió d'alimentació/terra fluixa Sense senyal d'encesa remota Vol de bateria baixatage | Comproveu i substituïu els fusibles Verify and tighten all power/ground connections Check remote wire connection or ART setting Charge or check boat battery |
| No sound from subwoofers | Cables d'altaveu solts Incorrect input sensitivity Head unit not sending signal Amplificador en mode de protecció | Check and secure speaker connections Adjust SENSITIVITY switch and gain Verify head unit output Check for overheating or short circuits |
| So distorsionat | Guany massa alt Poor quality input signal Damaged speaker wire or subwoofer | Reduir ampguany lifier Check RCA cables and head unit output Inspect speaker wires and subwoofer cone for damage |
| Subwoofer RGB LEDs not working | Incorrect wiring to controller Controlador RGB defectuós Tira LED danyada | Verify RGB wiring connections Test with a known good controller Contact support if LEDs are damaged |
8. Especificacions
Hertz HMD1 Marine Mono Ampmés viu
| Característica | Especificació |
|---|---|
| Potència de sortida (RMS) | 800 W x 1 at 2-Ohm Up to 1000 W x 1 at 1-Ohm |
| Distorsió (THD) | 0.1% |
| Relació senyal/soroll (S/N) | 110 dBA |
| DampFactor | 140 a 100 Hz |
| Alimentació Voltage | 11-15 VDC |
| Fusibles | Dual 30A |
| Entrades | Pre-in RCA, Wired Speaker Inputs |
| Característiques | Mute Function, Automatic Remote Turn On/Off |
| Pes de l'article | 26.9 pounds (System Weight) |
| Dimensions del paquet | 19 x 15 x 9 inches (System Dimensions) |
| Número de model | HertzBDL240610-03 |
Hertz HMS 10 S2-LD-SW Marine Subwoofer
| Característica | Especificació |
|---|---|
| Mida | 10 polzades |
| Impedància | 2 ohms |
| Power Handling (Continuous/Peak) | 250 W / 500 W |
| Bobina de veu | 50 mm (2 polzades) |
| Mida de l’imant | 140 x 60 x 30 mm (5.51 x 2.36 x 1.18 polzades) |
| SPL Rating | 88.5 dB |
| Fs (Freqüència de ressonància) | 43 Hz |
| Qts (Total Q Factor) | 0.60 |
| Xmech (Mechanical Excursion) | ±16.3 mm (0.64 in.) |
| profunditat | 191 mm (7.52 polzades) |
| Característiques | RGB LEDs, White Sport Grille (paintable), UV Inhibitors |
Figure 5: Frequency response graph for the Hertz HMS 10 S2-LD-SW Subwoofer, showing impedance (Ohm) versus frequency (Hz).
9. Informació de la garantia
This Hertz product is covered by a 1 any de garantia del fabricant from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
10. Suport
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Hertz customer support or your authorized Hertz dealer. Refer to the official Hertz weblloc web per obtenir informació de contacte i recursos addicionals.