Introducció
Thank you for choosing the Vrabocry DC 5V/12V/24V 17 Key RF Wireless Remote LED Controller. This device is designed to provide versatile control over your 5050, 3528, and 5630 LED strip lights, offering a range of static colors and dynamic modes. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
Informació de seguretat
- Assegureu-vos que l'entrada voltage (5V, 12V, or 24V) matches your LED strip lights and power supply. Incorrect voltage can damage the controller and LED strips.
- Do not expose the controller or remote to moisture or extreme temperatures.
- Desconnecteu l'alimentació abans de fer qualsevol connexió o desconnexió.
- Aquest producte només està pensat per a ús interior.
- Mantenir fora de l'abast dels nens.
Contingut del paquet
El paquet inclou els articles següents:
- 1 x RF Mini RGB Controller
- 1 x 17-Key RF Wireless Remote (CR2025 battery not included)
- 1 x Manual d'usuari
Configuració
1. Controller Connection
- Connect your LED strip light to the 4-pin output connector of the RF Mini RGB Controller. Ensure the polarity is correct (usually indicated by arrows or markings).
- Connect a compatible DC 5V/12V/24V power supply to the input jack of the RF Mini RGB Controller.
- Comproveu que totes les connexions estiguin segures abans d'aplicar energia.
Image: The Vrabocry RF Mini RGB Controller connected to its 17-key wireless remote. The controller has a white cable with a 4-pin connector for LED strips and a power input jack.
2. Instal·lació de la bateria del control remot
The 17-key RF Wireless Remote requires one CR2025 button battery (not included).
- Locate the battery tray on the back of the remote control.
- Gently push the small tab and pull out the battery tray.
- Inseriu una nova bateria CR2025 amb el costat positiu (+) cap amunt.
- Slide the battery tray back into the remote until it clicks into place.
Image: The back of the 17-key RF Wireless Remote, illustrating the battery compartment for a CR2025 battery. Instructions for opening and inserting the battery are visible.
Instruccions de funcionament
The 17-key RF Wireless Remote allows for comprehensive control of your LED strip lights. The remote operates using a 433MHz wireless signal, providing control without direct line-of-sight.
Imatge: Frontal view of the 17-key RF Wireless Remote Control, displaying all buttons and their labels for various functions.
Funcions de control remot:
| Botó | Funció |
|---|---|
| EN ESPERA | Turns the LED lights on or switches to standby mode. |
| MODE+ / MODE- | Switches between 9 dynamic modes or transitions from static lighting to dynamic modes. |
| SPEED+ / SPEED- | Adjusts the speed of dynamic modes (5 levels). |
| BRIGHT+ / BRIGHT- | Adjusts the brightness of static colors or dynamic modes. |
| COLOR+ / COLOR- | Cycles through 20 static colors. Can also switch from dynamic mode to a static color. |
| SINGLE COLOR SELECT | Directly selects specific static colors: White, Red, Green, Blue, Yellow, Cyan, Pink. |
| DEMO | Activates a demonstration mode cycling through various dynamic effects. |
Modes dinàmics:
The controller offers 9 dynamic modes, including effects such as strobe, breathing, fading in and out, slow flashing, and flickering. Use the MODE+ i MODE- buttons to cycle through these effects.
Colors estàtics:
There are 20 static colors available. Use the COLOR+ i COLOR- buttons to select your desired color, or use the dedicated single color buttons for quick access to primary colors.
Manteniment
- Neteja: Use a soft, dry cloth to clean the controller and remote. Do not use liquid cleaners or solvents.
- Substitució de la bateria: Replace the CR2025 battery in the remote control when its range decreases or it stops responding. Refer to the "Remote Control Battery Installation" section for instructions.
- Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec quan no el feu servir durant períodes prolongats.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| LED strip lights do not turn on. | No hi ha alimentació al controlador. Connexions incorrectes. La bateria del comandament a distància està morta. | Comproveu la connexió de la font d'alimentació. Verify LED strip and power supply connections are secure and correct polarity. Substituïu la bateria del comandament. |
| El comandament a distància no respon. | Bateria morta o instal·lada incorrectament. Remote is too far from the controller. | Replace CR2025 battery, ensuring correct polarity. Move closer to the controller. The RF signal has a typical range, but obstacles can reduce it. |
| LED colors are incorrect or flickering. | Connexió fluixa. Incompatible LED strip type. | Check all 4-pin connections for the LED strip. Ensure your LED strip is a common anode RGB type compatible with this controller. |
Especificacions
- Voltage: 5 V - 24 V CC
- Corrent de treball: 12A / 3 channels (4A per channel)
- Temperatura de treball: -20 °C a 60 °C (-4 °F a 140 °F)
- Dimensions del controlador: Aproximadament 1.6 x 0.5 x 0.2 polzades (40 x 12.7 x 5 mm)
- Control RGB: 3 output channels, common anode+
- Colors estàtics: 20
- Modes dinàmics: 9
- Nivells de velocitat: 5
- Mètode de control: 433MHz RF Wireless
- Remote Battery Type: CR2025 (no inclòs)
Garantia i Suport
Vrabocry products are designed for reliability and performance. For warranty information or technical support, please refer to the retailer where you purchased this product or visit the official Vrabocry weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
Si trobeu algun problema que no es tracta en aquest manual, poseu-vos en contacte amb el servei d'atenció al client per obtenir ajuda.