Informació important de seguretat
Please read all instructions carefully before using the Adamson B10 Bed Cooling System. Failure to follow these instructions may result in injury or damage to the product.
- Seguretat elèctrica: Always unplug the unit from the power outlet before cleaning, maintenance, or if it will be unused for an extended period. Do not operate with a damaged cord or plug. Keep the power cord away from heated surfaces.
- Tractament de l'aigua: Use only distilled water in the reservoir to prevent mineral buildup and ensure optimal performance. Do not overfill the reservoir. Ensure all connections are secure to prevent leaks.
- Col·locació de la unitat: Place the cooler unit on a stable, level surface. Ensure it is positioned at the same level or higher than the mattress pad to facilitate proper water circulation. Do not block the air vents on the unit.
- Ús general: This product is intended for residential use only. Keep out of reach of children and pets. Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
Què s'inclou
Verify that all the following components are present in your package:
- Adamson B10 Cooler Unit
- Cotton Mattress Pad
- Cable d'alimentació
- Spare Drain Plug
- Control remot
- AAA Battery (for remote)
Instruccions de configuració
- Desempaquetar components: Traieu amb cura tots els articles de l'embalatge.
- Position the Cooler Unit: Place the Adamson B10 Cooler unit on a flat, stable surface next to your bed. For optimal water flow, ensure the unit is at the same level or slightly higher than the mattress pad.
Image: Proper placement of the cooler unit relative to the mattress pad for efficient water circulation.
- Place the Mattress Pad: Lay the cotton mattress pad directly on your bed. The pad is designed for versatile use and can be oriented horizontally for a Twin bed (75"L x 39"W) or vertically for a Single alignment.
Image: Versatile use of the mattress pad for different bed sizes.
- Connecteu les mànegues: Connect the two hoses extending from the cooler unit to the corresponding ports on the mattress pad. Push firmly until they click into place, ensuring a secure, leak-free connection.
Image: Ensure all parts are installed securely to prevent leaks.
- Omplir el dipòsit: Open the reservoir cap on the top of the cooler unit. Fill the reservoir with distilled water up to the 'MAX' fill line. Do not overfill.
- Connectar l'alimentació: Plug the power cable into the cooler unit, then plug the other end into a standard electrical outlet.
- Instal·leu la bateria del comandament a distància: Open the battery compartment on the remote control and insert the provided AAA battery, observing the correct polarity.
Instruccions de funcionament
Once set up, your Adamson B10 Bed Cooling System is ready for use.
- Encès/apagat: Press the power button on the remote control or directly on the cooler unit to turn the system on or off.
- Funció de refrigeració: The system will immediately begin circulating chilled water through the mattress pad, effectively lowering the mattress temperature by 7-12°F.
Image: The water cooling system reduces mattress temperature by 7 to 12°F.
- Ajustar la velocitat del ventilador: Use the fan speed buttons on the remote control to cycle through the four available fan speeds. Select the speed that provides your desired level of cooling.
- Comoditat: The mattress pad is made from 100% cotton, providing a soft and breathable surface. You can sleep directly on the pad or add a mattress topper for additional comfort.
Image: The soft and comfy 100% cotton pad allows you to sleep directly on it or add a topper.
Manteniment
Regular maintenance ensures the longevity and optimal performance of your cooling system.
- Neteja del dipòsit d'aigua: Empty the water tank and refill with fresh distilled water every 2 weeks. This prevents mineral buildup and maintains hygiene.
- Mattress Pad Drying: After emptying the tank, allow the mattress pad to dry out completely every 2 weeks. This helps prevent mold and odors, ensuring optimal performance.
Image: Empty the tank and dry out the mattress every 2 weeks for optimal performance to prevent smell and mold.
- Neteja de filtres: The internal filter should be cleaned every 2-4 weeks. To clean, remove the filter, rinse it under running water, and then reinsert it into the unit.
- Emmagatzematge: If you plan to store the unit for an extended period, ensure both the water tank and the mattress pad are completely dry before packing.
Resolució de problemes
Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| No Cooling or Weak Cooling | Low water level, improper unit placement, kinked hoses, dirty filter. | Check and refill water reservoir. Ensure cooler unit is level with or higher than the mattress. Straighten any kinked hoses. Clean the internal filter. |
| Fuites d'aigua | Loose hose connections, improperly sealed drain plug, damaged components. | Verify all hose connections are secure. Ensure the drain plug is tightly sealed. Inspect hoses and pad for any visible damage. |
| La unitat no s'encén | Power cable disconnected, faulty outlet, remote battery issue. | Check power cable connection to unit and wall outlet. Test the outlet with another device. Ensure AAA battery in remote is correctly inserted and charged. |
| Soroll inusual | Obstruction in fan, unstable placement, low water level. | Check for any obstructions around the fan vents. Ensure the unit is on a stable, level surface. Verify the water level in the reservoir. |
Especificacions
| Marca | Adamson |
| Nom del model | Adamson B10 |
| Material | 100% Cotton Pad |
| Tipus de muntatge | Autònom |
| Característiques especials | 4 Fan Speeds, Remote Control Included, Water Cooling System |
| Color | Gris |
| Capacitat de cabal d'aire | 80 peus cúbics per minut |
| Tipus de controls | Remot |
| Pes de l'article | 1.3 quilos |
| Ús recomanat | Residencial |
| Factor de forma | Personal |
| Wattage | 8 watts-hora |
| Nivell de soroll | 30 decibels |
| Compatibilitat amb la llar intel·ligent | Not Smart Home Compatible |
| Mode d'operació | Automàtic |
| Mida | Twin (75"L x 39"W) |
| Energy Consumption Standard | 8 watts-hora |
| Components inclosos | Adamson B10 Cooler, Cotton Mattress Pad, Power Cable, Spare Drain Plug, Remote Control, AAA Battery |
Garantia i Suport
Your Adamson B10 Bed Cooling System is backed by a comprehensive warranty and dedicated customer support.
- Garantia: The product includes a 5-year assurance, covering manufacturing defects and ensuring long-term reliability.
- Atenció al client: For any questions, technical assistance, or warranty claims, please contact our 24/7 customer service. Refer to the product packaging or the official Adamson weblloc per obtenir dades de contacte.