InnoGear Overhead Phone Mount with Ring Light (Model F-619) User Manual

Introducció

The InnoGear Overhead Phone Mount with Ring Light is designed to provide optimal lighting and flexible phone positioning for various content creation activities. This versatile setup is ideal for live streaming, video recording, photography, and online meetings, offering adjustable lighting and precise camera angles.

Image: The InnoGear Overhead Phone Mount with Ring Light, showcasing el seu disseny i funcionalitat.

Què hi ha a la caixa

Assegureu-vos que tots els components estiguin presents abans de començar el muntatge:

• 10-inch Ring Light with Phone Holder
• Adjustable Arm Stand
• E-clip (for cable management)
• Desk Base Mount
• Obturador remot sense fils
• Mini Wrench (for assembly)

Image: All included components of the InnoGear Overhead Phone Mount with Ring Light.

Instruccions de configuració

1. Attach the Desk Base Mount: Securely fasten the desk base mount to a flat desk edge. The clamp is compatible with surfaces up to 2.16 inches (5.5 cm) thick. Ensure the clamp is tightened firmly to prevent wobbling.
   

   Image: Desk edge compatibility and proper clamp adjunt.

2. Install the Arm Stand: Insert the base of the arm stand into the hole on the desk base mount. Tighten the securing knob on the base mount to hold the arm stand in place.
3. Connect the Ring Light: Attach the ring light assembly to the top of the arm stand. Ensure it is securely fastened.
4. Connexió d'alimentació: Connect the USB cable from the ring light to a 5V/2A or higher power adapter (not included). A laptop USB port (typically 5V/1A) is not recommended as it may cause intermittent light operation. The voltage must be exactly 5V.
5. Inseriu el vostre telèfon: Gently expand the phone holder located within the ring light and place your smartphone inside. Ensure the phone is held securely.

Instruccions de funcionament

Ring Light Control

The ring light is controlled via an inline remote on the USB cable:

• Botó d'encesa: Premeu per encendre o apagar el llum.
• Botó de canvi de mode: Cycle through 3 color modes: White Light (6500K), Natural Light (4500K), and Warm Light (2800K).
• Botons de brillantor (+/-): Adjust brightness across 10 levels (10% to 100%) for each color mode.

Image: Demonstration of the 3 color modes and 10 brightness levels.

Adjusting Position and Angle

The arm stand and phone holder offer extensive flexibility for precise positioning:

• Arm Stand: Features a 360° rotatable base, 135° back-and-forth extension, and 180° vertical tilt. Loosen the knobs on the arm joints to adjust, then tighten to secure.
• Titular del telèfon: The phone mount within the ring light can rotate 360° horizontally and tilt 180° vertically, allowing for optimal phone orientation.

Image: Flexible adjustments of the arm stand and phone holder.

Obturador remot sense fils

The included wireless remote shutter allows you to capture photos or start/stop recordings remotely. It is compatible with most iOS and Android devices.

1. Maridatge: Turn on the remote. On your smartphone, go to Bluetooth settings and pair with the device named 'AB Shutter3'.
2. Ús: Once paired, press the appropriate button on the remote (iOS or Android) to trigger your phone's camera shutter.

Nota: The remote control is for camera shutter operation only and does not control the ring light's brightness or modes.

Image: Wireless remote shutter for camera control.

Manteniment

To ensure the longevity and optimal performance of your InnoGear Overhead Phone Mount with Ring Light, follow these maintenance guidelines:

• Neteja: Use a soft, dry cloth to wipe down the ring light and arm stand. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
• Emmagatzematge: When not in use, fold the arm stand to save space and store the unit in a dry, cool environment away from direct sunlight and excessive dust.
• Cura del cable: Avoid sharp bends or kinks in the USB power cable. Do not pull the cable forcefully when disconnecting.

Resolució de problemes

Si teniu algun problema amb el dispositiu, consulteu les solucions habituals següents:

• Light Flickers or Turns Off Intermittently:
  • Ensure you are using a 5V power adapter with a minimum current of 2A (e.g., 5V/2A, 5V/3A). Lower output adapters (like some laptop USB ports) can cause instability.
  • Check that the USB cable is securely connected to both the light and the power adapter.
• Wireless Remote Shutter Not Connecting/Working:
  • Ensure the remote is turned on and its battery is not depleted.
  • Verify that Bluetooth is enabled on your smartphone and the remote is paired correctly ('AB Shutter3').
  • Remember the remote only controls the camera shutter, not the light functions.
• Arm Stand or Phone Holder is Not Stable:
  • Ensure the desk base mount clamp is tightened securely to the desk.
  • Check that all knobs on the arm stand joints are tightened after adjusting the position.
  • Verify that your desk surface is flat and within the maximum thickness limit (2.16 inches).

Especificacions

Garantia i Suport

This InnoGear product comes with a 12 mesos de garantia from the date of purchase, covering manufacturing defects. For technical support, warranty claims, or any inquiries regarding your product, please contact InnoGear customer service through their official website or the seller's contact information provided at the point of purchase.

Fabricant: InnoGear