sweeek IBEDAVA90BG
sweeek Avalon Storage Bed with Slatted Base and Headboard
Model: IBEDAVA90BG (90x190 cm)
Informació important de seguretat
Si us plau, llegiu atentament totes les instruccions abans del muntatge i l'ús. Conserveu aquest manual per a futures consultes.
- Assegureu-vos que totes les peces estiguin presents i que no estiguin danyades abans de començar el muntatge.
- Assemble the bed on a soft, clean surface to prevent scratches.
- No estrenyeu massa els cargols durant el muntatge.
- Mantingueu les peces petites allunyades dels nens durant el muntatge.
- Reviseu regularment tots els elements de fixació per assegurar-vos que romanen ajustats.
- No us poseu drets ni salteu al llit.
- Distribute weight evenly when using the storage compartment.
Contingut del paquet
Verifiqueu que tots els components estiguin inclosos al paquet:
- Bed frame components (side rails, footboard)
- Capçalera
- Slatted base with lifting mechanism
- Storage compartment base panels
- Hardware pack (screws, bolts, washers, Allen key)
- Instruccions de muntatge
Note: Mattress is not included.
Instruccions de muntatge
Tools required: Phillips head screwdriver (not included), Allen key (included).
- Desempaquetar i identificar les peces: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Compare each part to the parts list in the included assembly diagram to ensure everything is present.
- Muntar el marc del llit: Attach the side rails to the headboard and footboard using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until the frame is complete.
- Install the Storage Base: Place the base panels for the storage compartment into the designated slots within the bed frame. These panels form the bottom of the storage area.
- Attach the Slatted Base and Lifting Mechanism: Secure the slatted base frame to the bed frame using the provided hardware. Attach the gas lift mechanism according to the detailed diagram in your separate assembly guide. Ensure the mechanism operates smoothly before proceeding.
- Ajustament final: Once all components are in place and aligned, fully tighten all screws and bolts. Do not overtighten.

Operating the Storage Bed
The sweeek Avalon storage bed features a convenient gas lift mechanism for easy access to the under-bed storage compartment.
- Per obrir: Remove the mattress from the bed. Grasp the fabric handle located at the foot end of the slatted base. Gently lift the base upwards. The gas lift mechanism will assist in raising and holding the base in the open position.
- Tancar: Grasp the fabric handle and gently pull the slatted base downwards. Apply slight pressure to overcome the gas lift resistance until the base fully lowers and rests securely on the bed frame.
- Precaució de seguretat: Always remove the mattress before opening the storage compartment. Do not place hands or objects in the mechanism while opening or closing. Ensure the base is fully closed before placing the mattress back on the bed.

Cura i Manteniment
- Cura del teixit: For general cleaning, gently vacuum the fabric upholstery with a soft brush attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
- Cura del marc: Netegeu el marc del llit amb un drap suauamp drap. Eviteu utilitzar productes químics agressius o netejadors abrasius, ja que poden danyar l'acabat.
- Comprovacions periòdiques: Periodically check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability and prevent squeaking.
- Ventilació: The slatted base provides optimal ventilation for your mattress. Ensure the storage compartment is not overfilled to allow for air circulation.
Resolució de problemes
| Problema | Solució |
|---|---|
| Bed is wobbly or squeaks. | Check all bolts and screws. Tighten any loose fasteners. Ensure the bed is on a level surface. |
| Slatted base does not lift or close smoothly. | Ensure the mattress has been removed before lifting. Check for any obstructions in the mechanism. Verify that the gas lift mechanism was installed correctly according to the assembly guide. |
| Peces que falten o components danyats. | Do not proceed with assembly. Contact sweeek customer support immediately for assistance. |
Especificacions

| Característica | Detall |
|---|---|
| Número de model | IBEDAVA90BG |
| Marca | sweeek |
| Dimensions totals (L x A x A) | 202 cm x 97.5 cm x 86 cm |
| Compatibilitat de la mida del matalàs | 90 x 190 cm (Matalàs no inclòs) |
| Color | Beix |
| Estil | Contemporània |
| Pes | 32 quilos |
| Muntatge obligatori | Sí |
| Materials | Eucalyptus wood, composite panels, polyester fabric upholstery |
| Components inclosos | Slatted base, headboard, storage mechanism |
Garantia i Suport
For information regarding warranty coverage or to obtain customer support, please refer to the documentation provided with your purchase or visit the official sweeek website. If you encounter any issues not covered in this manual, please contact sweeek customer service for assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.