URintells Cuising 20 Bar Espresso Machine Instruction Manual

Introducció

This manual provides detailed instructions for the safe and efficient operation of your URintells Cuising 20 Bar Espresso Machine. Please read all instructions carefully before use and retain this manual for future reference.

Informació de seguretat

• Assegureu-vos que la màquina estigui col·locada sobre una superfície estable i plana.
• No submergiu l'aparell, el cable o l'endoll en aigua o cap altre líquid.
• Mantenir fora de l'abast dels nens.
• Desendolleu la presa de corrent quan no utilitzeu i abans de netejar.
• Use only with 120 Volts (AC) power supply.
• The machine features an automatic power-off function after approximately 15 minutes of inactivity to ensure safety.

Producte acabatview i Components

Familiaritzeu-vos amb les parts de la vostra màquina d'espresso:

Image: URintells Cuising Espresso Machine with labeled components for easy identification.

1. Escalfador de copes
2. Pantalla LED
3. Control panel (Power, Americano/Hot Water, Espresso, Espresso x 2, Steam)
4. ESE pod filter
5. Filtre d'una tassa
6. Filtre de doble tassa
7. Filter holder (Portafilter)
8. Reixeta de safata de goteig
9. Safata de goteig
10. Safata de degoteig interior
11. Pom de vapor
12. Thermo insulated handle
13. Vareta de vapor
14. Broquet de vapor
15. Botó ON/OFF
16. Measure spoon with tamper
17. Tapa del dipòsit d'aigua
18. Water tank (44 oz removable)

Components inclosos:

• 1 x manual d'instruccions
• 1x Espresso Machine With Milk Frother
• 1x 44 oz Removable Water Tank
• 1x 51mm One Cup Filter
• 1x 51mm Two Cup Filter
• 1x ESE Pod Filter
• 1x Stainless Steel 51mm Portafilter
• 1x Tamper amb cullera

Configuració i primer ús

Before First Use: Releasing Air from the Water Pump

It is essential to release air from the water pump before first use to ensure smooth coffee extraction. Follow these steps:

1. Fill the water tank with water up to the MAX level and install it in the designated position. (Do not exceed the max and min line).
2. Turn on the switch at the lower right corner of the machine.
3. The four buttons on the control panel will blink, and the machine will start to preheat automatically.
4. When preheating is finished (approximately 50 seconds), the LED screen will display the temperature.
5. Col·loqueu una tassa sota la vareta de vapor.
6. Turn the steam knob (11) to the "steam" position.
7. Let the hot water flow out of the steam wand for about 8 seconds.
8. Turn the steam knob back to the "OFF" position.

Image: Visual guide for the first use cycle, demonstrating how to release air from the water pump.

Instruccions de funcionament

Elaboració d'espresso

Your machine features 20 Bar professional pump pressure and pre-soaking technology for optimal extraction and flavor.

1. Ompliu el dipòsit d'aigua amb aigua.
2. Add ground coffee to the portafilter (7) and tamp evenly using the tamper with spoon (16). Choose between single (5), double (6), or ESE pod (4) filters based on your preference.
3. Place the portafilter into the espresso machine and lock it by turning the handle to the right.
4. Press the ON/OFF button (15) and wait for the espresso machine to preheat. Once the temperature is displayed on the LED screen (2), select your desired coffee mode (Espresso or Espresso x 2).

Image: Step-by-step guide for preparing espresso, from filling the water tank to selecting the coffee mode.

Control de temperatura

The LED display shows the water temperature. You can choose from three adjustable extraction temperatures: 192°F (Low), 198°F (Optimal), and 203°F (High) to suit your taste.

Image: LED display showing water temperature and options for low, optimal, and high temperature modes.

Escumat de llet

The powerful steam wand (13) allows you to create rich, barista-grade microfoam milk for lattes and cappuccinos. The steam wand is 360° adjustable and removable for easy cleaning.

1. Ompliu una gerra amb llet freda.
2. Insert the steam nozzle (14) into the milk surface, about 0.4 inches deep.
3. Turn the steam knob (11) to the "steam" position.
4. Check to see if the milk is swirling. As the milk level rises, lower the pitcher so that the steam nozzle remains below the surface of the milk.
5. When the desired foam is achieved, immerse the steam wand halfway into the milk.
6. Milk is ready when the pitcher is too hot to touch for 3 seconds.
7. Remove the pitcher from the steam wand.
8. Knock and swirl the pitcher, if needed, to get rid of large bubbles.
9. Aboqueu la llet escumada al cafè.

Image: Step-by-step visual guide for frothing milk with the steam wand.

Making Americano & Hot Water

The machine features an independent hot water pipe for convenience.

• To make an Americano, press the "Americano & Hot Water" button once.
• For hot water only, press the "Americano & Hot Water" button twice consecutively.

Image: Control panel illustrating single press for Americano and double press for hot water.

Manteniment i Neteja

Una neteja regular garanteix un rendiment òptim i una llarga durada de la teva màquina d'espresso.

Safata de goteig

• The drip tray (9) is removable and adjustable to accommodate cups of different heights.
• Empty and clean the drip tray regularly. It is not dishwasher safe.

Image: The adjustable drip tray allows for various cup sizes and is easily removed for cleaning.

Dipòsit d'aigua

• The 44 oz water tank (18) is detachable for easy refilling and hand washing.
• Ensure water levels are between MIN and MAX lines.

Image: The removable water tank is shown with its maximum and minimum fill indicators.

Portafiltre i filtres

• Clean the portafilter (7) and filters (4, 5, 6) after each use. ESE pod filters are particularly easy to use and clean.

Image: The three filter options (single, double, ESE pod) are displayed, highlighting their ease of use and cleaning.

Resolució de problemes

• No coffee coming out: Ensure the water tank is filled and properly seated. Perform the first-use air release procedure if not already done. Check that the portafilter is correctly locked.
• Water leftover in the coffee holder: This can occur if the coffee grounds are not tamped firmly enough or if the grind is too coarse. Experiment with tamping pressure and grind size.
• Buttons flashing (over-pressure protection): If the single and double shot buttons are flashing, it indicates over-pressure. This can happen if the coffee grind is too fine or tamped too hard. Release pressure by pressing the steam button or turning the steam knob. Adjust grind size or tamppressió d'entrada.
• Machine not heating up: Ensure the power switch is on and the machine is plugged into a working outlet. Allow approximately 50 seconds for preheating.
• Used or unclean machine received: Contact URintells Cuising via Amazon for assistance.

For further assistance, refer to the relevant instructional videos on the product page or contact URintells Cuising customer support via Amazon.

Especificacions

Garantia i Suport

Your URintells Cuising cappuccino machine comes with detailed instructions. For any questions about operation, refer to the relevant instructional videos on the product page or contact us via Amazon. If you receive a used or unclean cappuccino maker, please connect with us, and we will assist in resolving the issue.

Vídeos oficials de productes

Watch these official videos from URintells Cuising for visual guidance on using your espresso machine: