SIMREX 1/16 Scale High-Speed RC Car Instruction Manual

Introducció

Gràcies per la compraasing the SIMREX 1/16 Scale High-Speed RC Car. This remote control vehicle is designed for thrilling off-road performance, featuring 4WD, a powerful motor, and durable components. Please read this manual thoroughly before operation to ensure proper use, maintenance, and safety.

Figure 1: SIMREX 1/16 Scale High-Speed RC Car, remote control, and included accessories.

Informació de seguretat

For safe operation and to prevent damage to the product or injury, please adhere to the following safety guidelines:

• This product contains small parts and is not suitable for children under three years old due to choking hazards.
• Feu servir sempre el cotxe RC en zones obertes, lluny de persones, mascotes i obstacles.
• Do not operate near public roads, power lines, or bodies of water.
• Assegureu-vos que la bateria estigui completament carregada abans de cada ús.
• Do not attempt to modify or disassemble the RC car or its components.
• Eviteu l'exposició prolongada a la llum solar directa o a temperatures extremes.
• While the car is splash-proof, it is not recommended to submerge ho a l'aigua.

Figure 2: The RC car is designed to be splash-proof for wet conditions but should not be submerged.

Què hi ha a la caixa

Verifiqueu que tots els components siguin presents en desembalar:

• RC Car Body
• Transmissor de control remot
• 7.4V 1500mAh Li-ion Battery (1 included)
• Cable de càrrega USB
• Clau anglesa
• 4+ Body Clips
• Manual d'usuari

Figure 3: Contents of the SIMREX 1/16 Scale 4WD RC Truck package.

Configuració

1. Carregueu la bateria:

   Connect the 7.4V 1500mAh Li-ion battery to the USB charging cable. Plug the USB cable into a compatible USB power adapter (not included). The charging indicator will show the charging status. Ensure the battery is fully charged before first use. Charging time may vary.
2. Instal·leu la bateria del cotxe:

   Carefully remove the body clips and lift the car body. Insert the charged battery into the designated battery compartment within the chassis. Securely connect the battery connector to the car's power port. Replace the car body and secure it with the body clips.

3. Instal·leu les bateries del control remot:

   Open the battery compartment on the back of the remote control. Insert the required LR44 batteries (1 included) according to the polarity markings. Close the battery compartment.

Instruccions de funcionament

Control remot acabatview

Figure 4: Components of the 2.4GHz Remote Control Transmitter.

• Volant: Controls left and right turning.
• Activador: Estireu per accelerar endavant, empenyeu per frenar/retrocedir.
• Retall de l'accelerador: Ajusta el punt neutre de l'accelerador.
• Retall de direcció: Adjusts the neutral point of the steering to ensure the car drives straight.
• Interruptor d'alimentació: Turns the remote control ON/OFF.

Primera operació

1. Encès: Turn on the RC car first, then turn on the remote control. The indicator lights will confirm successful pairing.
2. Ajust de la direcció: Use the Steering Trim dial on the remote control to ensure the car's wheels are straight when the steering wheel is centered.
3. Conducció:
   • Pull the trigger gently to move forward. Pull further for higher speed (up to 36 KPH).
   • Push the trigger forward to brake. Push again to reverse.
   • Turn the steering wheel left or right to steer the car.
4. Volum baixtage Protecció: The car is equipped with low-voltage protecció. Si la bateria voltage drops too low, the car's speed will decrease, indicating it's time to recharge the battery.
5. Apagar: Always turn off the RC car first, then the remote control after use. Disconnect the battery from the car.

Figure 5: The 4WD system and independent suspension allow for excellent all-terrain performance.

Manteniment

• Neteja: After each use, especially in dusty or muddy conditions, clean the car with a soft brush or cloth. Do not use water directly on electronic components.
• Cura de la bateria:
  • Desconnecteu sempre la bateria del cotxe quan no la feu servir.
  • Guardeu les piles en un lloc fresc i sec.
  • No sobrecarregueu ni descarregueu excessivament la bateria.
• Inspecció: Regularly inspect the wheels, suspension, and drive shafts for any damage or debris. Ensure all screws are tight.
• Lubricació: Periodically lubricate moving parts like gears and bearings with RC-specific lubricant to ensure smooth operation and longevity.

Resolució de problemes

Especificacions

• Número de model: TOY2413
• Escala: 1:16
• Sistema d'accionament: Tracció a les quatre rodes (4WD)
• Velocitat màxima: Up to 36 KPH (22 MPH)
• Freqüència de control: 2.4 GHz
• Battery (Car): 7.4V 1500mAh Li-ion (included)
• Bateria (comandament a distància): 1 x LR44 (inclosa)
• Temps de joc: Aproximadament 30 minuts per càrrega
• Motor: High Torque 390 Motor with Heatsink
• Suspensió: Independent Suspension with Metal Shock Absorbers
• Xassís: Ultra-Durable Metal 4-wheel drive chassis
• Pneumàtics: Pneumàtics de goma inflats
• Dimensions: 10.62 x 9.25 x 5.11 polzades (27 x 23.5 x 13 cm)
• Pes: 1.8 lliures (0.82 kg)

Figure 6: Product dimensions and a visual representation of included accessories.

Figure 7: Key internal and external components of the RC car.

Garantia i Suport

SIMREX products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please contact SIMREX customer service through the retailer's platform or visit the official SIMREX weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

Per a més ajuda, podeu visitar el SIMREX Store on Amazon.

Vídeos oficials de productes

No official product videos from the seller with relevant instructional content were found for embedding in this manual.