1. Introducció
Thank you for choosing the ASAHOM Permanent Outdoor Lights Pro. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your lighting system. Please read it thoroughly before use and retain it for future reference.
Image: The ASAHOM Permanent Outdoor Lights Pro packaging, remote control, and a close-up of the individual LED lights.
2. Informació de seguretat
AVÍS: Si no es segueixen aquestes instruccions de seguretat, es poden produir incendis, descàrregues elèctriques, lesions o danys materials.
- Desconnecteu sempre l'alimentació abans de la instal·lació, el manteniment o la resolució de problemes.
- Ensure all connections are secure and waterproof, especially in outdoor environments.
- Do not install on rainy or hot days. Extreme temperatures or slippery conditions increase the risk of falls during installation.
- Operate the lights within the specified temperature range of -4°F to 113°F (-20°C to 45°C).
- Keep the power adapter and control box in a location protected from direct water exposure, despite their IP67 rating.
- No intenteu modificar ni reparar el producte. Poseu-vos en contacte amb el servei d'atenció al client per obtenir ajuda.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- 200ft White Permanent Outdoor Lights (1 unit)
- 6ft Extension Cords (6 units)
- Senyal Amplifier (2 units)
- Waterproof Wire Connector (1 unit)
- Adhesive (12 units)
- Screw Clips (60 units)
- Screw Pack (18 units)
- Remote Control (1 unit, AAA battery NOT included)
- T-splitter (1 unit)
- Driver Module (1 unit)
- Ruler (1 unit)
- Manual d'usuari (1 unitat)
4. Configuració i instal·lació
Follow these steps for proper installation of your ASAHOM Permanent Outdoor Lights Pro:
- Preparació: Disconnect the power. Clean the installation surface thoroughly with a tissue and alcohol to ensure optimal adhesion. Allow the surface to dry completely.
- Col·locació: Install the lights approximately 2-4 inches (5-10 cm) away from the wall surface, typically on eaves.
- Adhesió: Peel off the VHB gum sticker from the back of each light. Firmly press each light against the cleaned surface for about 8 seconds to ensure strong adhesion.
- Assegurar amb clips: Attach the provided screw clips to each LED light for additional security. Use the screw pack to fasten them.
- Connecting Light Segments: Splice light segments using the white waterproof connectors every 16.4ft (5m). Ensure the connections are tight and secure by screwing in the cap.
- Extension and Signal Amplificació: If extending the light string beyond 150ft, the included driver module is required. For continuous connection of 4 pieces of 6ft extension cords, a signal ampCal connectar el lifier abans del primer cable d'extensió per garantir l'estabilitat del senyal.
- Prova prèvia a la instal·lació: Before final installation, test whether the lights function normally. This helps identify any issues before permanent mounting.
Image: Visual guide illustrating the step-by-step installation process, including cleaning, positioning, adhering, and connecting light segments.
Image: Illustration of the lights' modular design, highlighting their cuttable, spliceable, and extendable nature, along with the driver module.
5. Instruccions de funcionament
Your ASAHOM Permanent Outdoor Lights Pro offers multiple control methods:
5.1 Control de l'aplicació Smart Life
Download the Smart Life app from your device's app store. Follow the in-app instructions to pair your lights. The app provides extensive features:
- 100 modes d'escena: Choose from a variety of preset lighting effects for any occasion.
- 16 milions de colors: Select any color from the spectrum.
- Control individual de LED: Adjust the color of each LED light independently.
- 10 Music Modes: Sync lights to music, with adjustable microphone sensitivity for real-time effects.
- Funció de bricolatge: Create and save your own custom lighting patterns.
- Funció de temporitzador: Programar els llums perquè s'encenguin/apaguin a hores específiques.
- Llum blanca ajustable: Dedicated warm white (2700K) and cool white (6500K) options for daily and accent lighting.
5.2 Control remot
Use the included remote control for convenient access to various functions, including ON/OFF, brightness adjustment, color changes, and scene selection. Ensure AAA batteries are inserted (not included).
5.3 Caixa de control
The physical control box allows direct control over the entire light strand. You can change the color, adjust brightness, reset, and turn the lights ON/OFF without connecting to the app.
5.4 Control de veu
Pair your lights with Amazon Alexa or Google Assistant via the Smart Life app for hands-free voice control.
Imatge: Més deview of the four control methods available for the lighting system: Smart Life App, Voice Devices (Alexa, Google Assistant), Control Box, and Remote Controller.
6. Manteniment
The ASAHOM Permanent Outdoor Lights Pro are designed for durability and minimal maintenance:
- Durabilitat: Constructed with anti-UV material, these lights are built to withstand outdoor conditions.
- Vida útil: The LED lights have an estimated lifespan of up to 50,000 hours.
- Classificació impermeable: The LED lights, power adapter, and control box are all IP67 waterproof, providing protection against dust and temporary immersion in water.
- Neteja: Periodically clean the light surfaces with a soft, damp cloth to remove dirt and debris. Ensure power is disconnected before cleaning.
- Comprovació de la connexió: Regularly inspect all connections for tightness and ensure waterproof caps are securely fastened.
Image: Icons highlighting the product's robust features for outdoor environments, including UV resistance, long lifespan, and IP67 waterproofing for key components.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Els llums no s'encenen. | Sense corrent, connexió fluixa, adaptador de corrent defectuós. | Check power supply. Ensure all connections are secure. Test power adapter. |
| Lights flicker or some sections are off. | Poor connection, signal interference, insufficient power for extended length. | Verify all waterproof connectors are tight. Ensure 2.4G WiFi signal is strong. Use signal amplifier for lengths beyond 150ft. |
| L'aplicació no es pot connectar als llums. | Incorrect Wi-Fi network (only 2.4G supported), incorrect pairing mode, app glitch. | Ensure your phone is connected to a 2.4G Wi-Fi network. Reset the lights to pairing mode. Restart the Smart Life app. |
| Lights fall off after installation. | Improper surface preparation, insufficient pressure during adhesion, clips not used. | Ensure surface is clean and dry before applying adhesive. Apply firm pressure for 8 seconds. Use all provided screw clips for added security. |
| El comandament a distància no funciona. | No batteries, dead batteries, remote not paired. | Insert AAA batteries. Replace old batteries. Follow instructions to pair the remote with the control box. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | S106D |
| Tipus de llum | RGBCW LED (5-in-1 RGB+WW+CW) |
| Nombre de llums | 144 |
| Longitud total | 200ft (extendable, max 200ft) |
| Brillantor | Up to 60lm per light (4000K white) |
| Temperatura de color | 2700K-6500K (adjustable white) |
| Classificació impermeable | IP67 (LEDs, power adapter, control box) |
| Temperatura de funcionament | -4 °F a 113 °F (-20 °C a 45 °C) |
| Vida útil | 50,000 hores |
| Mètodes de control | Smart Life App, Remote Control, Control Box, Voice Control (Alexa, Google Assistant) |
| Voltage | 36 volts (CC) |
| Wattage | 120 watts |
9. Garantia i Suport
ASAHOM provides a 3-year warranty for its Permanent Outdoor Lights Pro. For warranty claims, technical support, or any inquiries regarding your product, please contact ASAHOM customer service through the retailer's platform or the official ASAHOM website. Please have your purchase details and model number (S106D) ready when contacting support.