MCGOR GLS-C010 10-inch Rechargeable Motion Sensor Under Cabinet Light User Manual

1. Introducció

Thank you for choosing the MCGOR GLS-C010 Rechargeable Motion Sensor Under Cabinet Light. This manual provides detailed instructions for the safe and efficient use of your new light. This product features a motion sensor, dimmable brightness, and a rechargeable battery, making it suitable for various indoor applications such as kitchens, closets, and hallways.

2. Informació de seguretat

• Do not expose the light to water or high humidity. This product is not water-resistant.
• Do not disassemble or modify the device. Unauthorized modifications may cause damage or injury.
• Mantenir fora de l'abast dels nens.
• Utilitzeu només el cable USB proporcionat per carregar.
• Eviteu l'exposició directa dels ulls a la llum LED.
• Assegureu-vos que la superfície d'instal·lació estigui neta i seca per a un rendiment òptim de l'adhesiu.

3. Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

• 1 x Under Cabinet Light (MCGOR GLS-C010)
• 1 x cable de càrrega USB
• 2 x Iron Plates (for magnetic mounting)

4. Producte acabatview

The MCGOR GLS-C010 light bar is designed for versatile illumination with intelligent features.

Image 1: The MCGOR GLS-C010 under cabinet light, showing its sleek design and included USB charging cable.

The light features a control panel with a switch and a brightness adjustment button, along with a PIR sensor and a USB-C charging port.

Imatge 2: Detallada view of the control panel, including the ON/OFF/AUTO switch, brightness adjustment button, PIR sensor, and USB-C charging port.

5. Configuració i instal·lació

The MCGOR GLS-C010 offers two convenient installation methods: direct magnetic attachment or adhesive mounting using the included iron plates.

Image 3: Illustration of the two installation methods: direct magnetic attachment to metal surfaces or using adhesive metal plates for non-metal surfaces.

5.1. Magnetic Attachment (for Metal Surfaces)

If your desired installation surface is metal (e.g., a refrigerator or metal shelf), the light can be directly attached using its built-in magnets.

5.2. Adhesive Mounting (for Non-Metal Surfaces)

1. Netegeu la superfície: Assegureu-vos que la superfície d'instal·lació estigui neta, seca i llisa.
2. Attach Iron Plates: Peel off the protective film from one side of the adhesive iron plate. Stick the plate firmly to the desired installation location. Repeat for the second plate if needed for longer lights or extra stability.
3. Muntar la llum: The light has built-in magnets. Simply attach the light to the installed iron plates. This allows for easy removal for charging.

6. Instruccions de funcionament

The MCGOR GLS-C010 features a multi-function switch for different operating modes and a separate button for brightness adjustment.

6.1. Power Modes (ON/OFF/AUTO Switch)

• Mode ON: Slide the switch to 'ON'. The light will remain continuously on. This mode is suitable for tasks requiring prolonged illumination.
• Mode OFF: Slide the switch to 'OFF'. The light will turn off completely.
• Mode AUTO (Sensor de moviment): Slide the switch to 'AUTO'. In this mode, the light will automatically turn on when human motion is detected within 10 feet and a 120° angle in a dark or low-light environment. It will automatically turn off after approximately 20 seconds of no motion detected.

Image 4: Visual representation of the motion and light sensor functionality, showing detection range (10ft), angle (120°), and auto-off time (20 seconds).

6.2. Ajust de la brillantor

The light offers 5 levels of brightness. While the light is on (in ON or AUTO mode), press the brightness adjustment button (located next to the main switch) to cycle through the available brightness levels. Release the button at your desired brightness.

6.3. Carregant la bateria

The light is equipped with an 1800mAh rechargeable lithium polymer battery. When the battery is low, the light's performance may diminish. To charge:

1. Connect the provided USB charging cable to the USB-C port on the light.
2. Connect the other end of the USB cable to a standard 5V USB power adapter (not included).
3. El llum indicador de càrrega s'il·luminarà durant la càrrega i s'apagarà quan estigui completament carregat.

Image 5: The MCGOR light being charged via its USB-C port, highlighting the 1800mAh battery capacity.

7. Manteniment

• Neteja: Netegeu el llum amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Cura de la bateria: To prolong battery life, avoid fully discharging the battery frequently. Charge the light regularly, especially if it will not be used for an extended period.
• Emmagatzematge: Guardeu la llum en un lloc fresc i sec quan no s'utilitzi.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

MCGOR products are designed for quality and reliability. For any questions, technical support, or warranty inquiries, please contact MCGOR customer service through the retailer's platform where the product was purchased. Please retain your proof of purchase for warranty claims.