Philips 929004621411

Philips Solar Outdoor Security LED Light

Model: 929004621411

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Philips Solar Outdoor Security LED Light. This product is designed to provide efficient and reliable outdoor illumination with integrated motion sensing capabilities and solar charging. Please read this manual thoroughly before installation and use.

Philips Solar Outdoor Security LED Light main view

Figure 1: Philips Solar Outdoor Security LED Light

2. Informació de seguretat

  • Assegureu-vos que el producte estigui instal·lat en un lloc que rebi llum solar directa per a una càrrega òptima.
  • No intenteu desmuntar ni modificar el producte. Això pot anul·lar la garantia i plantejar riscos per a la seguretat.
  • Mantingueu el panell solar net de pols, brutícia i deixalles per mantenir l'eficiència de càrrega.
  • This product is designed for outdoor use and is IP65 rated for water resistance. However, avoid submerging it in water.
  • Install the light at a recommended height of 2.5 meters for optimal motion detection and light coverage.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al paquet:

  • 1 x Philips Solar Outdoor Security LED Light Unit
  • 1 x comandament a distància
  • 4 x cargols de muntatge
  • 4 x endolls de paret
  • 1 x Manual d'usuari (aquest document)
Included accessories for Philips Solar Outdoor Security LED Light

Figure 2: Included Accessories and Installation Dimensions

4. Configuració i instal·lació

The Philips Solar Outdoor Security LED Light is designed for easy, wire-free installation.

4.1 Triar una ubicació d'instal·lació

  • Select a location where the solar panel can receive direct sunlight for at least 6-8 hours daily to ensure optimal battery charging.
  • The light unit and solar panel are connected by a 5-meter cable, allowing flexible placement of the solar panel in a sunny spot, even if the light unit is in a shaded area.
  • Recommended installation height for the light unit is approximately 2.5 meters (8.2 feet) for effective motion detection and wide light coverage.

4.2 Instruccions de muntatge

  1. Mark the desired drilling points on the wall for both the light unit and the solar panel. Refer to the dimensions provided in Figure 2.
  2. Drill holes at the marked positions. Insert the wall plugs into the drilled holes.
  3. Secure the light unit and the solar panel to the wall using the provided mounting screws.
  4. Connecteu el cable del panell solar a la unitat de llum. Assegureu-vos que la connexió sigui segura i impermeable.
Easy installation of Philips Solar Outdoor Security LED Light

Figure 3: Easy Installation with No Wiring Required

5. Instruccions de funcionament

Your Philips Solar Outdoor Security LED Light features a PIR motion sensor and can be controlled via an integrated switch or the included remote control.

5.1 Activació i càrrega inicials

Upon first use, ensure the solar panel is exposed to direct sunlight for at least 24 hours to fully charge the internal 2000mAh battery. The light will automatically activate at dusk once charged.

5.2 modes d'il·luminació

La llum ofereix tres modes de funcionament diferents:

  1. Mode de sensor: The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness (800 lumens) for 20 seconds, then turns off.
  2. Dim + Sensor Mode: The light stays on at a low brightness (2% / 16 lumens). When motion is detected, it switches to 100% brightness (800 lumens) for 20 seconds, then returns to dim mode. Tip: This mode automatically switches to Sensor Mode after 6 hours.
  3. Mode d'atenuació: The light remains constantly on at 10% brightness (80 lumens) throughout the night. Tip: This mode automatically switches to Sensor Mode after 4 hours.
Illustration of Sensor Mode operation

Figure 4: Sensor Mode Operation

Illustration of Dim + Sensor Mode operation

Figure 5: Dim + Sensor Mode Operation

Illustration of Dim Mode operation

Figure 6: Dim Mode Operation

5.3 Controlling the Light

The light can be controlled using the physical switch on the unit or the remote control.

Using the Integrated Switch:

When first powered on, the light is in a deactivated state. Press the switch sequentially to cycle through the modes:

  • Premeu una vegada: Mode sensor
  • Premeu dues vegades: Dim + Sensor Mode
  • Premeu tres vegades: Mode Dim
  • Premeu quatre vegades: Apagat

Ús del comandament a distància:

The remote control provides convenient access to all functions within a 5-meter range.

  • Botó ON: Encén el llum.
  • Botó OFF: Apaga la llum.
  • '1' button: Activa el mode sensor.
  • '2' button: Activates Dim + Sensor Mode.
  • '3' button: Activates Dim Mode.
Diagram showing switch and remote control functions

Figure 7: Control Methods (Switch and Remote)

5.4 Motion Sensor Performance

The highly sensitive PIR motion sensor has a detection angle of 120 degrees and a maximum detection range of 8 meters.

Abast i angle de detecció del sensor de moviment

Figure 8: Motion Sensor Detection Capabilities

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your solar light.

  • Neteja del panell solar: Netegeu periòdicament el panell solar amb un drap suau iamp drap per eliminar la pols, la brutícia, les fulles o la neu. Un panell net garanteix la màxima absorció de la llum solar i l'eficiència de càrrega.
  • Cleaning the Light Unit: Clean the LED lens and motion sensor window with a soft, dry cloth to ensure clear light output and accurate motion detection.
  • Cura de la bateria: The integrated 2000mAh battery is designed for long-term use. If the light's performance diminishes over time, ensure the solar panel is receiving adequate sunlight. The battery is not user-replaceable.
  • Resistència a la intempèrie: The IP65 rating ensures resistance to dust and water jets. While designed for outdoor conditions, avoid harsh chemical cleaners or high-pressure water jets directly on the unit.
Philips outdoor lighting durability and weather resistance

Figure 9: Philips Outdoor Lighting Durability and Weather Resistance

7. Solució De Problemes

If you encounter issues with your Philips Solar Outdoor Security LED Light, refer to the following common problems and solutions:

ProblemaCausa possibleSolució
La llum no s'encén a la nit.Càrrega solar insuficient.Ensure the solar panel is in direct sunlight for 6-8 hours daily. Clean the solar panel.
La llum és tènue o parpelleja.Bateria baixa o panell solar brut.Allow the solar panel to charge for a full day in direct sunlight. Clean the solar panel.
El sensor de moviment no detecta.Sensor obstruït o mode incorrecte.Ensure the sensor window is clean and unobstructed. Verify the light is in 'Sensor Mode' or 'Dim + Sensor Mode'.
El comandament a distància no funciona.Battery depleted or out of range.Replace the remote control battery. Ensure you are within the 5-meter control range.

8. Especificacions

Technical specifications for the Philips Solar Outdoor Security LED Light (Model 929004621411):

  • Marca: Philips
  • Número de model: 929004621411
  • Font de llum: LED
  • Temperatura de color: 6500 Kelvin (blanc fred)
  • Flux lluminós: 800 lúmens (màx.)
  • Font d'alimentació: Energia solar
  • Bateria: 2000mAh d'alta capacitat
  • Material: Plàstic
  • Color: Negre
  • Dimensions del producte (L x A x A): 13.6 cm x 14.4 cm x 4.5 cm
  • Classificació impermeable: IP65
  • Sensor de moviment: PIR (infrarojos passius)
  • Angle de detecció: 120 graus
  • Interval de detecció: Fins a 8 metres
  • Mètode de control: Integrated Switch, Remote Control (Infrared)
  • Cable Length (Solar Panel to Light): 5 metres
  • Tipus d'instal·lació: Muntatge de paret
Comparison table of Philips solar light specifications

Figura 10: Especificacions del producte a continuacióview

9. Garantia i Suport

9.1 Legal Guarantee

This product is covered by a minimum two-year legal guarantee for goods sold within the European Union. Consumers are entitled to their rights under the legal guarantee of conformity if goods do not match the description or do not function as intended. Sellers are liable for any lack of conformity that existed when the goods were delivered and which becomes apparent within the legal guarantee period. This includes rights to free repair or replacement, or in some cases, a price reduction or full reimbursement.

For more information on your rights in a specific country, please refer to the official European consumer rights weblloc: europa.eu/youreurope/guarantees

Legal Guarantee information for products sold in the European Union

Figure 11: European Legal Guarantee Details

9.2 Atenció al client

For any questions, technical assistance, or warranty claims, please contact Philips customer support through the retailer where the product was purchased or visit the official Philips website for support options in your region.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.