Introducció
This manual provides comprehensive instructions for the Jamar Plus+ Digital Hand Dynamometer, an electronic evaluation tool designed for accurate measurement of isometric grip force and hand strength. It is suitable for use in rehabilitation, physical therapy, and general strength assessment programs.
Producte acabatview
Image: The Jamar Plus+ Digital Hand Dynamometer, featuring a digital display, control buttons, an adjustable handle, and a wrist strap.
Característiques principals:
- Digital measurement of isometric grip force for rehabilitation and physical therapy.
- Utilizes electronic load sensors for superior accuracy in hand and finger strength assessment.
- Digital readout measures from 0-200 lbs or 0-90 kgs.
- Adjustable handle with five grip positions (1.375" to 3.375") to accommodate various hand sizes.
- Durable aluminum body with scratch-resistant UV coating protects internal components.
Configuració
Desembalatge
- Carefully remove the Jamar Plus+ Digital Hand Dynamometer from its packaging.
- Verify that all components are present, including the dynamometer unit and the reusable storage container.
Instal·lació de la bateria
The Jamar Plus+ Digital Hand Dynamometer requires two AAA batteries (not included). To install:
- Localitzeu el compartiment de la bateria a la part posterior del dispositiu.
- Obriu la tapa del compartiment de la bateria.
- Introduïu dues piles AAA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
- Tanqueu de manera segura la tapa del compartiment de la bateria.
Ajust de la nansa
The handle can be adjusted to five different grip positions to suit various hand sizes and testing requirements. The positions range from 1.375 inches to 3.375 inches.
- To adjust, gently pull the movable handle outward from the main body.
- Feu lliscar la maneta fins a la posició desitjada.
- Release the handle to allow it to lock securely into the chosen position.
Instruccions de funcionament
Encès/Apagat
- Per encendre el dispositiu, premeu el botó ON/OFF botó.
- Per apagar el dispositiu, manteniu premut el botó ON/OFF botó fins que la pantalla s'apagui.
Performing a Grip Strength Test
- Ensure the device is powered on and the digital display is clear.
- Adjust the handle to the appropriate grip position for the individual being tested.
- Instruct the user to hold the dynamometer comfortably and squeeze the handle with maximum effort.
- Premeu el botó PROVA button to initiate a measurement.
- The peak grip force will be displayed on the screen in your selected unit (lbs or kgs).
- The device can store multiple trials and calculate averages and standard deviations automatically. Refer to the full instruction manual for detailed guidance on using the SELECT TEST i NUM TRIALS funcions.
Resetting Measurements
To clear all previous measurements and prepare for a new test series, press the RESET botó.
Manteniment
Neteja
- Wipe the exterior of the dynamometer with a soft, slightly damp tela.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
- Avoid immersing the device in water or any other liquid.
Emmagatzematge
- Store the dynamometer in its original reusable storage container when not in use.
- Mantingueu el dispositiu en un lloc sec i fresc, allunyat de la llum solar directa i de temperatures extremes.
- If the device will not be used for an extended period, remove the AAA batteries to prevent potential leakage and damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Piles gastades o instal·lades incorrectament. | Replace the two AAA batteries, ensuring correct polarity. |
| Lectures inexactes o inconsistents. | Device not properly reset before testing, or handle not securely locked. | Premeu el botó RESET button before each new test series. Ensure the adjustable handle is firmly locked into one of the five positions. |
| La pantalla està tènue o parpelleja. | Potència de bateria baixa. | Substituïu les piles AAA. |
Especificacions
| Paràmetre | Valor |
|---|---|
| Número de model | FAB12-0604 |
| Interval de mesura | 0-200 lliures (0-90 kg) |
| Posicions de presa | 5 (1.375" a 3.375") |
| Font d'alimentació | 2 x piles AAA |
| Material de construcció | Aluminum body with UV coating |
| Dimensions del producte | 12 x 8 x 6 polzades |
| Pes | Aproximadament 0.01 unces |
| Fabricant | Empreses de fabricació |
Informació de la garantia
The Jamar Plus+ Digital Hand Dynamometer is covered by a one-year limited warranty provided by Fabrication Enterprises. This warranty typically covers defects in materials and workmanship under normal use.
To make a warranty claim, please retain your original proof of purchase and contact Fabrication Enterprises customer support. Specific terms, conditions, and exclusions may apply; refer to the warranty card included with your product for complete details.
Suport
For technical assistance, troubleshooting guidance, or inquiries regarding your product's warranty, please contact the manufacturer:
- Fabricant: Empreses de fabricació
- Contact information (phone, email, or website) can typically be found on the product packaging or by visiting the official Fabrication Enterprises weblloc.
Always refer to the official manufacturer's resources for the most up-to-date support information.