Datewink 19x15W Moving Head Light (Model ZQ02102) User Manual

1. Introducció

This manual provides comprehensive instructions for the safe and effective operation, installation, and maintenance of your Datewink 19x15W Moving Head Light, Model ZQ02102. This professional stage lighting fixture features 19x15W RGBW 4-in-1 LEDs, an additional RGB outer ring light strip, and offers Beam, Wash, Strobe, and Zoom effects. It supports DMX512 control and sound-activated modes, making it suitable for various event settings.

Imatge 1.1: Frontal view of the Datewink 19x15W Moving Head Light.

2. Instruccions de seguretat

Please read and understand all safety instructions before installing or operating this device. Failure to comply may result in electric shock, fire, or personal injury.

• Seguretat elèctrica: Assegureu-vos que la font d'alimentació voltage matches the device's requirements. Always connect to a grounded power outlet. Disconnect power before any service or maintenance.
• Instal·lació: Install the fixture in a well-ventilated area, away from heat sources. Ensure secure mounting to prevent accidental falls. Maintain a minimum distance of 0.5 meters from flammable materials.
• Funcionament: Do not look directly into the light source when the fixture is operating, as it can cause eye damage. Avoid operating in wet or damp condicions.
• Manteniment: Refer all servicing to qualified personnel. Do not attempt to repair the device yourself.

3. Producte acabatview

The Datewink ZQ02102 Moving Head Light is designed for dynamic stage and event lighting. It integrates multiple lighting technologies for versatile effects.

3.1 Característiques clau

• Font de llum: 19x15W RGBW 4-in-1 LEDs for main beam/wash, plus 60x0.8W RGB 3-in-1 5050 LEDs for an outer ring light strip.
• Efectes: Beam, Wash, Strobe, and Zoom (10°-60°).
• Moviment: Pan 540° (X-axis) and Tilt 220° (Y-axis).
• Modes de control: DMX512 (17/25 channels), Sound Activated, Auto, Master/Slave.
• Brillantor: Total luminous flux of 4500lm.

3.2 Components

Familiarize yourself with the main components of the moving head light:

Image 3.1: Illustration of the 19 RGBW 4-in-1 main LEDs and the 60 RGB 3-in-1 outer ring LEDs.

Image 3.2: Key internal components including optical lens, cooling fan, rotary arm, and control system.

Imatge 3.3: posterior view showing the LCD display, control buttons (Menu, Up, Enter, Down), DMX IN/OUT ports, Power IN/OUT, and power switch.

4. Configuració

4.1 Desembalatge

Carefully remove the fixture from its packaging. Verify that all components listed in the packing list are present and undamaged. The package should contain:

Image 4.1: Contents of the product package, including the moving head light, power cord, hook accessory, and user manual.

• 1 x Datewink Moving Head Light
• 1 x cable d'alimentació
• 1 x Hook Accessory
• 1 x Manual d'usuari

4.2 Muntatge

The fixture can be mounted in various positions: ceiling, wall, floor, or desk. Always use appropriate mounting hardware and ensure the mounting surface can support the weight of the fixture (approximately 15.62 lbs / 7.08 kg).

Imatge 4.2: Ex.amples of mounting configurations and the Pan (X-axis 540°) and Tilt (Y-axis 220°) movement capabilities.

• Muntatge superior: Use the included hook accessory and safety cables. Ensure all clamps and fasteners are securely tightened.
• Floor/Desk Placement: Place the fixture on a stable, level surface. Ensure adequate ventilation around the unit.

4.3 Connexió d'alimentació

Connect the provided power cord to the "POWER IN" port on the rear of the fixture and then to a suitable grounded power outlet. Use the "POWER OUT" port to daisy-chain power to other compatible fixtures if needed, respecting the maximum power load.

4.4 Connexió DMX

For DMX control, connect a DMX controller to the "DMX IN" port using a 3-pin DMX cable. To control multiple fixtures, connect the "DMX OUT" of the first fixture to the "DMX IN" of the next, and so on. Ensure the last fixture in the chain has a DMX terminator connected to its "DMX OUT" port for stable signal transmission.

5. Instruccions de funcionament

5.1 Tauler de control

The fixture features an LCD display and four buttons for navigation and settings:

• MENÚ: Access the main menu or go back to the previous menu level.
• AMUNT: Navegueu cap amunt per les opcions del menú o augmenteu els valors.
• BAIX: Navegueu cap avall per les opcions del menú o disminuïu els valors.
• ENTRAR: Confirma la selecció o entra en un submenú.

Nota: Upon initial power-up, the display might be in Chinese. Navigate the menu to find the language setting and change it to English for easier operation.

5.2 Modes de funcionament

The Datewink ZQ02102 supports several operating modes:

• Mode DMX512: For professional control, connect to a DMX controller. The fixture supports 17 or 25 DMX channels, allowing precise control over pan, tilt, color, dimmer, strobe, zoom, and outer ring effects. Refer to the DMX channel chart in the appendix (if applicable, or state it's in the full manual) for detailed channel functions.
• Mode activat per so: The fixture responds to ambient sound, creating dynamic light shows synchronized with music. Adjust sensitivity via the control panel.
• Mode automàtic: Pre-programmed light shows run automatically. Select from various built-in programs using the control panel.
• Mode mestre/esclau: Link multiple fixtures together. Set one unit as "Master" and others as "Slave" to synchronize their operation.

5.3 Efectes de llum

The fixture offers a range of effects:

• Barreja de colors RGBW: The 4-in-1 LEDs allow for smooth and even color mixing, producing a wide spectrum of colors.
• Funció de zoom: Electronically adjust the beam angle from 10° (narrow beam) to 60° (wide wash) for varied coverage.


Image 5.1: Visual representation of the adjustable zoom effect, from a narrow 10° beam to a wide 60° wash.

• Outer Ring Effects: The 60 RGB LEDs in the outer ring can create auxiliary effects such as running, jumping, gradient, and chasing patterns, independently or in conjunction with the main light.


Imatge 5.2: Ex.amples of various RGBW 4-in-1 light effects and the dynamic patterns achievable with the outer ring LEDs.

6. Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del vostre aparell.

• Neteja: Netegeu periòdicament les lents i la part exterior del casinNetegeu amb un drap suau i sense borrissol. No utilitzeu productes de neteja abrasius ni dissolvents. Assegureu-vos que l'aparell estigui apagat i que s'hagi refredat abans de netejar-lo.
• Ventilador i reixetes de ventilació: Keep cooling fans and ventilation openings clear of dust and debris to prevent overheating.
• Inspecció: Reviseu regularment els cables d'alimentació, els cables DMX i els accessoris de muntatge per detectar qualsevol signe de desgast o dany. Substituïu immediatament els components danyats.

7. Solució De Problemes

Si teniu problemes, consulteu els següents problemes i solucions habituals:

8. Especificacions

Image 8.1: Physical dimensions and weight of the Datewink Moving Head Light.

9. Garantia i Suport

Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte amb el vostre distribuïdor o directament amb el fabricant. Conserveu el rebut de compra com a comprovant de compra.