DARKROCK D240 CPU Liquid Cooler Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your DARKROCK D240 CPU Liquid Cooler. Please read this guide thoroughly before beginning installation to ensure proper setup and optimal performance. The DARKROCK D240 is an all-in-one (AIO) liquid cooling system designed to efficiently dissipate heat from your CPU, featuring a 240mm radiator, addressable RGB lighting, and a pure copper pump base.

Image: The DARKROCK D240 CPU Liquid Cooler integrated into a computer system, showcasinels seus efectes d'il·luminació RGB.

2. Configuració i instal·lació

2.1 Contingut del paquet

Abans de la instal·lació, comproveu que tots els components siguin presents al paquet:

• 1x Radiator with Integrated Pump and Tubing
• 2x 120mm ARGB PWM Cooling Fans
• Intel Mounting Bracket (LGA1851/1700/1200/115X)
• AMD Mounting Bracket (AM5/AM4)
• Placa posterior per a sòcols Intel
• Mounting Screws and Standoffs for Intel/AMD
• Pasta tèrmica
• Cargols de ventilador
• 1 to 3 Fan Splitter Cable
• RGB Controller (if included with your model)

Imatge: Una imatge detallada view of all parts and accessories included in the DARKROCK D240 CPU Liquid Cooler package.

2.2 Passos previs a la instal·lació

1. Prepare your Motherboard: Ensure your motherboard is compatible with the cooler. The D240 supports Intel LGA1851/1700/1200/115X and AMD AM5/AM4 sockets.
2. Treure la nevera antiga: Si substituïu un refrigerador existent, traieu-lo amb cura i netegeu qualsevol pasta tèrmica antiga de la superfície de la CPU amb alcohol isopropílic.
3. Identificar els elements de muntatge: Select the appropriate mounting bracket and screws for your CPU socket type (Intel or AMD).

Image: Visual representation of the cooler's compatibility with various AMD and Intel CPU sockets.

2.3 Muntatge del radiador i dels ventiladors

1. Attach the two 120mm fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case (typically exhausting air out of the case).
2. Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or side).

Image: Illustration of the 120mm PWM/ARGB cooling fans and the radiator, highlighting their features.

Imatge: Un primer pla view of the radiator's fin structure, designed for optimal heat dissipation.

2.4 Installing the Pump Head

1. Apliqueu una petita quantitat de pasta tèrmica al centre del difusor de calor integrat (IHS) de la CPU.
2. Attach the correct mounting bracket to the pump head. Ensure the protective film is removed from the copper base before installation.
3. Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs on the motherboard.
4. Secure the pump head with the thumb screws, tightening them in a diagonal pattern until snug. Do not overtighten.

Image: A visual representation of the pure copper base of the pump and the liquid circulation path.

2.5 Connexions de cablejat

Connect the pump and fan cables to your motherboard or an RGB controller as follows:

• Potència de la bomba: Connect the pump's 3-pin or 4-pin connector to the dedicated AIO_PUMP or CPU_OPT header on your motherboard.
• Potència del ventilador: Connect the fan cables to the 1-to-3 splitter cable, then connect the splitter to a CPU_FAN or SYS_FAN header on your motherboard.
• Il·luminació ARGB: Connect the ARGB cables from the fans and pump head to a 5V 3-pin ARGB header on your motherboard or to the included RGB controller. Ensure correct pin alignment to prevent damage.
• RGB Controller Power: If using an RGB controller, connect it to a SATA power connector from your power supply.

Image: A comprehensive diagram illustrating the electrical connections for the pump, fans, and ARGB lighting.

2.6 Vídeo d'instal·lació

Per obtenir una guia visual del procés d'instal·lació, consulteu el vídeo oficial d'instal·lació:

3. Instruccions de funcionament

3.1 Engegada inicial

After completing the installation and wiring, power on your computer. The fans and pump should start operating, and the ARGB lighting should illuminate. Monitor your CPU temperatures using system monitoring software to ensure proper cooling.

3.2 Control d'il·luminació ARGB

The DARKROCK D240 features addressable RGB lights on both the fans and the water-cooling head. These can be controlled via:

• Programari de la placa base: If connected to a compatible 5V 3-pin ARGB header, you can synchronize and customize lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Controlador RGB inclòs: If your model includes a dedicated RGB controller, use its buttons or remote control to cycle through various lighting modes, colors, and effects.

Image: A computer case interior illuminated by the customizable addressable RGB lighting of the DARKROCK D240 cooler and other components.

Image: The RGB controller and its remote, used for adjusting the cooler's lighting effects.

3.3 PWM Smart Control

The adjustable PWM fans (800 RPM - 1800 RPM) automatically adjust their speed based on CPU temperature. This provides efficient cooling when needed and reduces noise during lighter loads. You can often fine-tune fan curves through your motherboard's BIOS settings or dedicated software.

3.4 Vídeo de presentació del producte

Observe the DARKROCK D240 in action with its dynamic RGB lighting and cooling capabilities:

4. Manteniment

Regular maintenance helps ensure the longevity and optimal performance of your liquid cooler:

• Neteja de pols: Netegeu periòdicament les aletes del radiador i les aspes del ventilador per evitar l'acumulació de pols, que pot impedir el flux d'aire i reduir l'eficiència de la refrigeració. Feu servir aire comprimit o un raspall suau.
• Inspeccioneu els tubs i les connexions: Occasionally check the tubing for any signs of leaks or kinks. Ensure all electrical connections are secure.
• Pasta tèrmica: While not frequently required, if you ever remove the pump head from the CPU, you will need to clean off the old thermal paste and apply new paste before reinstallation.

5. Solució De Problemes

If you encounter issues with your DARKROCK D240 CPU Liquid Cooler, consider the following:

• Sense energia/Sense llums:
  • Check all power connections (pump, fans, RGB controller) to ensure they are securely plugged in.
  • Verify that the motherboard headers are supplying power (check BIOS settings).
  • If using an RGB controller, ensure it is receiving SATA power.
• Temperatures altes de la CPU:
  • Confirm the pump is running (you might feel a slight vibration or hear a low hum).
  • Ensure the pump head is securely mounted to the CPU and thermal paste was applied correctly.
  • Check fan operation and ensure they are spinning and providing adequate airflow.
  • Netegeu la pols de les aletes del radiador.
• Soroll anormal:
  • Identify if the noise is coming from the fans or the pump.
  • For fans, check for obstructions or loose mounting.
  • For pump noise, ensure it's not running dry (though unlikely with a sealed AIO).
• RGB Not Working/Incorrect Colors:
  • Verify the ARGB cables are connected to a 5V 3-pin header, not a 12V 4-pin RGB header, as this can cause damage.
  • Check motherboard RGB software settings or RGB controller mode.
  • Ensure all ARGB connections are firm.

6. Especificacions

7. Garantia i Suport

For warranty information and technical support, please refer to the official DARKROCK weblloc web o poseu-vos en contacte amb el servei d'atenció al client. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

Optional protection plans may be available for extended coverage. Please check with your retailer for details on available protection plans.