La Crosse Technology 314-1410

La Crosse Technology 314-1410 Digital Thermometer with Wired Probe Instruction Manual

Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your La Crosse Technology 314-1410 Battery Operated Digital Thermometer with Wired Probe. Please read these instructions carefully before using the device to ensure proper function and longevity.

The digital thermometer is designed to provide accurate temperature readings for both indoor and remote locations using its 6-foot water-resistant wired probe. It features a clear digital display, 24-hour high/low temperature records, and selectable Fahrenheit or Celsius display.

Contingut del paquet

  • Digital Thermometer Unit (Model 314-1410)
  • Wired Temperature Probe (6-foot length)
  • Manual d'instruccions

Configuració

  1. Instal·leu les bateries:

    Locate the battery compartment on the back of the thermometer unit. Insert two fresh AAA batteries, ensuring correct polarity (+ and -). Close the battery compartment cover securely.

    Enrere view of the La Crosse Technology 314-1410 thermometer showing the battery compartment and control buttons.

    Imatge: Enrere view of the thermometer, highlighting the battery compartment for two AAA batteries.

  2. Connect Wired Probe:

    Plug the wired temperature probe into the designated port on the side of the thermometer unit. Ensure the connection is firm.

    En angle view of the La Crosse Technology 314-1410 thermometer with the wired probe connected.

    Imatge: Anglesa view of the thermometer with the wired probe connected to the side port.

  3. Col·locació inicial:

    Place the main thermometer unit in your desired indoor location. Position the wired probe in the area where you wish to measure the remote temperature, such as a refrigerator, freezer, or outdoors. The probe is water-resistant.

    Davant view of the La Crosse Technology 314-1410 digital thermometer displaying indoor and probe temperatures.

    Imatge: Frontal view of the thermometer, showing the main display with probe and indoor temperature readings.

Instruccions de funcionament

  • Visualització de la temperatura:

    The top reading on the display shows the temperature from the wired probe. The bottom reading shows the indoor temperature measured by the main unit.

    La Crosse Technology 314-1410 digital thermometer showing two temperature readings, one for the probe and one for indoor.

    Image: The thermometer's display showing both probe and indoor temperature readings.

  • Switching Fahrenheit/Celsius:

    Press the "°F/°C" button on the front of the unit to toggle between Fahrenheit and Celsius temperature display.

  • Viewing High/Low Records:

    Press the "HI/LO" button to view the 24-hour high and low temperature records for both the probe and indoor sensors. Each press will cycle through High Probe, Low Probe, High Indoor, Low Indoor, and then return to current temperatures.

  • Resetting High/Low Records:

    Mentre viewing the high or low records, press and hold the "HI/LO" button for approximately 3 seconds to clear and reset the 24-hour high/low records.

  • Decimal Point Readings:

    The thermometer provides temperature readings with decimal-point precision. To turn decimal readings on/off, press and hold the "°F/°C" button.

Manteniment

  • Substitució de la bateria:

    When the low battery indicator appears on the display, replace the two AAA batteries with fresh ones. Ensure correct polarity.

  • Neteja:

    Clean the thermometer unit and probe with a soft, damp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar la pantalla o laasing.

  • Cura de la sonda:

    The wired probe is water-resistant and suitable for outdoor or damp environments. However, avoid prolonged submersion in water to prevent damage.

Resolució de problemes

ProblemaSolució
Sense pantalla o pantalla tènueCheck battery installation. Replace with fresh AAA batteries.
Lectures de temperatura incorrectesEnsure the wired probe is securely connected. Verify the probe is placed correctly in the desired measurement area. Check battery power.
"LO" or "HI" displayedThe measured temperature is outside the device's operational range.

Especificacions

  • Model: 314-1410
  • Marca: Tecnologia La Crosse
  • Interval de temperatura interior: Not explicitly stated, typically 32°F to 122°F (0°C to 50°C)
  • Interval de temperatura de la sonda: Fins a 140 °F (60 °C)
  • Requisits d'alimentació: 2 piles AAA (no incloses)
  • Longitud de la sonda: 6 peus (1.83 metres)
  • Dimensions (unitat): 3.74 inches (Length) x 2.56 inches (Width) x 1.11 inches (Depth)
  • Característiques especials: Fast Reading System, Fast Refresh, High Accuracy, Low Battery Indicator
Diagram showing the dimensions of the La Crosse Technology 314-1410 thermometer unit and its wired probe.

Image: Dimensional drawing of the thermometer and probe, indicating measurements in inches and centimeters.

Garantia

La Crosse Technology products are designed for reliability. For specific warranty information, including duration and terms, please refer to the warranty card included with your product or visit the official La Crosse Technology weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

Suport

For additional assistance, troubleshooting tips, or to access video tutorials, please visit the official La Crosse Technology website. You may also contact their USA-based support team for direct assistance.

Recursos en línia: www.lacrossetechnology.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.