GENERIC 1140 Hood Decal Instruction Manual

1. Introducció

This manual provides essential instructions for the proper installation and care of your GENERIC 1140 Hood Decal. Designed for durability and a precise fit, this decal is compatible with 1140 series tractors. Please read these instructions thoroughly before proceeding with installation to ensure optimal results and longevity of the product.

Compatibilitat del producte: Compatible with Tractor(s) 1140.

Substitueix els números de peça OEM: JD1140, L65453 LH, L63977 LH, L35065 LH, L35062 RH, L65453 RH, L63977 RH.

Figure 1: GENERIC 1140 Hood Decal. This image shows the general appearance of the decal, which is designed to fit the hood of 1140 series tractors.

2. Instal·lació

Proper installation is crucial for the appearance and adhesion of your new hood decal. Follow these steps carefully:

2.1. Eines i materials necessaris

• Draps nets i sense pelusa
• Rubbing alcohol or a mild degreaser
• Spray bottle with water and a few drops of mild soap (optional, for wet application)
• Squeegee or credit card (wrapped in a soft cloth)
• Cinta adhesiva
• Cinta mètrica

2.2. Preparació de la superfície

1. Netegeu la superfície: Thoroughly clean the tractor hood surface where the decal will be applied. Use rubbing alcohol or a mild degreaser to remove all dirt, grease, wax, and debris.
2. Rentar i assecar: Rinse the area with clean water and dry it completely with a lint-free cloth. Ensure no moisture remains.
3. Temperatura: For best results, apply the decal in a clean, dust-free environment with temperatures between 60°F and 80°F (15°C and 27°C).

2.3. Decal Application (Dry Method - Recommended for smaller decals)

1. Posicionament: Carefully place the decal on the desired area without removing the backing paper. Use masking tape to temporarily hold it in place and step back to check alignment. Adjust as needed.
2. Hinge Method: Once positioned, apply a strip of masking tape across the center of the decal, creating a hinge. This will hold the decal in place while you work on one half.
3. Remove Backing (First Half): Peel back the backing paper from one side of the hinge, cutting it off cleanly.
4. Apply Decal (First Half): Starting from the hinge, slowly and carefully apply the decal to the surface. Use a squeegee or credit card (wrapped in cloth) to smooth out the decal, working from the center outwards to prevent air bubbles.
5. Remove Hinge and Backing (Second Half): Remove the masking tape hinge. Peel back the remaining backing paper from the other side.
6. Apply Decal (Second Half): Repeat the smoothing process for the second half, working from the center outwards.
7. Final Smoothing: Once the entire decal is applied, firmly rub over the entire surface with the squeegee to ensure maximum adhesion and remove any remaining small bubbles.
8. Temps de curat: Allow the decal to cure for at least 24-48 hours before washing the tractor or exposing it to harsh conditions.

2.4. Decal Application (Wet Method - Optional, for larger decals or beginners)

1. Preparació de la solució: Mix water with a few drops of mild soap in a spray bottle.
2. Superfície de polvorització: Lightly spray the cleaned application surface with the soap solution.
3. Treure el suport: Carefully peel the entire backing paper from the decal.
4. Spray Adhesive Side: Lightly spray the adhesive side of the decal with the soap solution.
5. Posicionament: Place the decal onto the wet surface. The solution allows you to slide and reposition the decal until it's perfectly aligned.
6. Squeegee Water: Once positioned, use a squeegee to gently push the water and air bubbles out from under the decal, working from the center outwards.
7. Dry and Cure: Allow the decal to dry completely. This may take several hours. Do not touch or disturb the decal during this time. The decal will adhere firmly as the water evaporates.

3. Cura i manteniment

To ensure the longevity and appearance of your GENERIC 1140 Hood Decal, follow these care guidelines:

• Neteja: Wash the decal gently with mild soap and water. Avoid harsh chemicals, abrasive cleaners, or high-pressure washers directly on the decal, as these can damage the material or adhesive.
• Eviteu rascades: Be careful not to scratch the decal with sharp objects or abrasive materials.
• Waxing: You may wax over the decal with non-abrasive car wax to protect it, but avoid waxes that contain petroleum distillates or harsh solvents.
• Emmagatzematge: If the tractor is stored outdoors, consider covering it to protect the decal from prolonged exposure to harsh UV rays and extreme weather conditions, which can cause fading or cracking over time.

4. Solució De Problemes

Here are solutions to common issues that may arise during or after decal application:

• Bombolles d'aire:
  • Bombolles petites: Most small bubbles will dissipate on their own over a few days or weeks as the decal cures.
  • Bombolles grans: For larger, persistent bubbles, you can carefully prick the edge of the bubble with a fine needle and gently press the air out with your thumb or a squeegee.
• Peeling Edges:
  • Assegureu-vos que la superfície estigui ben neta i seca abans de l'aplicació.
  • Press down firmly on the peeling edge with your thumb or a squeegee. If the issue persists, a small amount of vinyl adhesive can be used, but this should be done with caution.
• Desalineació:
  • If using the wet method, you can reposition the decal before squeegeeing.
  • For dry application, if misalignment is significant, it may be necessary to carefully peel off the decal and reapply, or replace it if the adhesive is compromised.

5. Especificacions

6. Garantia i assistència

6.1. Garantia del producte

All new, rebuilt, and used tractor parts, including this decal, come with a 1 any de garantiaAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

6.2. Atenció al client

For any questions regarding installation, troubleshooting, or warranty claims, please contact your retailer or the GENERIC customer support channel through which you purchased this product. Provide your model number (AO-036097-AS) and purchase date for faster assistance.

7. Avisos importants

ADVERTIMENT: Cancer and Reproductive harm. See www.P65Warnings.ca.gov

Exempció de responsabilitat: All OEM part numbers and logos are used for identification purposes only. This product is an aftermarket replacement part.

Please note that some listings may use stock images as a reference for customers. The actual product may vary slightly in appearance but will match the specified fit and function.