1. Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Electactic Commercial Nugget Ice Maker Machine, Model HBZB-30N. Please read all instructions carefully before using the appliance and retain this manual for future reference.
2. Instruccions de seguretat
ADVERTÈNCIA: Per reduir el risc d'incendi, descàrrega elèctrica o lesions, seguiu aquestes precaucions bàsiques:
- Assegureu-vos que l'aparell estigui ben connectat a terra.
- No feu servir l'aparell amb un cable o un endoll danyats.
- No permeteu que els nens facin servir o juguin amb la màquina de gel.
- Desconnecteu l'alimentació abans de netejar-la o reparar-la.
- Utilitzeu només aigua potable per a la producció de gel.
- No emmagatzemeu substàncies explosives com ara llaunes d'aerosol amb un propulsor inflamable en aquest aparell.
- L'aparell s'ha de col·locar de manera que l'endoll sigui accessible.
- Aquest aparell està pensat per ser utilitzat en aplicacions domèstiques i similars, com ara zones de cuina del personal a botigues, oficines i altres entorns de treball; masies i per clients en hotels, motels i altres entorns de tipus residencial; ambients tipus bed and breakfast; càtering i aplicacions similars no minoristes.
3. Contingut del paquet
- Electactic Commercial Nugget Ice Maker Machine (Model HBZB-30N)
- Pala de gel
- Mànega d'aigua
- Ice Basket (x2)
- Manual d'usuari
4. Producte acabatview
Característiques principals:
- Disseny compacte: Dimensions of 14.96"D x 16.34"W x 33.07"H, suitable for freestanding or under-counter installation.
- Producció eficient de gel: Produces up to 66 pounds of nugget ice per day.
- Extended Ice Preservation: Advanced insulation system keeps 90% of ice unmelted for 24 hours.
- Funcionament silenciós: Designed for efficient ice-making without excessive noise interference.
- Funció d'auto-neteja: Activated by pressing the "Timer Clean" button for 5 seconds.
- Subministrament automàtic d'aigua: Water intake pipe on the back for continuous ice production.
- Temporitzador de 24 hores: Supports scheduled start-up or shutdown for energy saving.
- Construcció duradora: Stainless steel door and exterior for durability and easy cleaning.
Components:
5. Instal·lació
5.1 Desembalatge i col·locació
- Traieu tots els materials d'embalatge, inclosa l'escuma i la cinta adhesiva.
- Place the ice maker on a flat, stable surface capable of supporting its weight when full of ice and water.
- Ensure adequate ventilation around the unit. Maintain at least 5 inches of space from walls or other appliances.
- This unit can be used freestanding or built-in under a counter. Refer to Figure 4 for placement examples.
5.2 Door Handle Installation
The door handle is typically shipped detached to prevent damage. Follow these steps to install it:
- Unpack the door handle and its fixed screws.
- Unscrew the secret screw at the bottom of the door handle with the provided hex wrench to a certain extent to prevent fitting issues during installation.
- Carefully peel off the protective film from the door surface to reveal the screw holes at the top.
- Align the fixed screws of the door handle vertically with the holes on the door.
- Tighten them with a crosshead screwdriver.
- Align the door handle with the fixed screws, push it in, and ensure it is fully seated.
- Tighten the bottom security screws.
- After securing, pull the door handle to ensure it does not become loose.
Refer to the video "Commercial Nugget Ice Maker Machine, 66Lbs/Day" for a visual guide on door handle installation.
Video 1: Official product video demonstrating the installation of the door handle, water inlet, and door reversal for the Electactic Commercial Nugget Ice Maker Machine.
5.3 Water Inlet Pipe Installation
Connect the ice maker to a potable water supply using the provided water hose.
- Locate the "Water intake" port at the back of the ice maker.
- Remove the clip from the water inlet.
- Align the water pipe with the inlet and push it firmly into place.
- Reattach the clip that was removed earlier to secure the pipe.
- Gently pull the water pipe outward to ensure it is securely fixed.
- To replace or remove the water inlet pipe, first remove the buckle, then push the water inlet pipe inward to remove and replace it.
5.4 Outlet Pipe Installation (Drainage)
The ice maker relies on gravity drainage. Ensure the drain pipe is not placed higher than the water outlet.
- Locate the "Water outlet" port at the back of the ice maker.
- Remove the waterproof plug from the drain port.
- First, align the larger end of the outlet pipe with the drain pipe, then push it in firmly.
- Ensure the drain pipe leads to a suitable drainage point that is lower than the ice maker's outlet.
5.5 Door Reversal Installation (Optional)
If you need to change the door's opening direction, follow these steps:
- Pry open the two decorative rings on the top cover of the ice maker.
- Use a crosshead screwdriver to unscrew the screws, and then remove the top cover.
- Remove the screw on the top right fixed plate with a crosshead screwdriver.
- Then lift the door upwards to remove it.
- Remove the three screws from the bottom right hinge and take off the hinge.
- Next, remove the three screws from the bottom left corner.
- Use the original three screws to secure the left hinge accessory to the bottom left corner.
- Remove the right fixed piece at the bottom of the door.
- Install the left fixed piece on the left side.
- Align the hole of the fixing piece at the bottom left corner of the door with the left hinge pin and insert it.
- Secure the fixture on the top left corner of the door, tighten the screws.
- Cover with the decorative cap.
- If the screw holes do not align, loosen the fixtures on both sides for adjustment.
- Screw hole cover on the top of the decorative piece.
6. Funcionament
6.1 Tauler de control acabatview
- Botó ON/OFF: Premeu per encendre o apagar la màquina de gel.
- TIMER/CLEAN Button: Short press to set the timer; long press (5 seconds) to activate the self-cleaning function.
- Botons +/-: Adjust timer settings or temperature.
- Indicadors: Display current temperature, ice making status, water shortage, and ice full status.
6.2 Inici inicial
- After installation, wait at least 2 hours before plugging in the unit to allow refrigerants to settle.
- Connecteu la màquina de gel a una presa de corrent amb connexió a terra.
- Assegureu-vos que el subministrament d'aigua estigui connectat i engegat.
- Press the ON/OFF button to start the ice maker.
6.3 Fabricació de gel
The ice maker will automatically begin producing nugget ice once turned on and connected to a water supply. Ice production typically starts within 10-15 minutes.
For a visual demonstration of ice production, refer to the video "EUHOMY Under Counter Nugget Ice Maker".
Video 2: This video demonstrates the ice production process of a similar nugget ice maker. Note: This video is for a related product (EUHOMY) and may not perfectly represent the Electactic model.
6.4 Funció de temporitzador
Use the TIMER button to schedule the ice maker's operation:
- Premeu el botó TIMER.
- Use the +/- buttons to set the desired delay time for startup or shutdown (up to 24 hours).
- The timer will activate after the set time.
7. Manteniment
7.1 Funció d'autoneteja
The ice maker features an automatic self-cleaning function to maintain hygiene and efficiency:
- Assegureu-vos que la màquina de gel estigui connectada a un subministrament d'aigua.
- Press and hold the "TIMER CLEAN" button for more than 5 seconds to activate the self-cleaning program.
- The cleaning cycle will run automatically. Do not interrupt the cycle.
- Once complete, the unit will return to standby mode.
7.2 Neteja regular
- Netegeu regularment l'exterior amb un drap suau i un detergent suau.
- Remove and clean the ice baskets periodically.
- For thorough internal cleaning beyond the self-cleaning cycle, consult a qualified technician.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La màquina de gel no produeix gel. | No water supply; power off; clogged water line. | Check water connection and supply valve; ensure unit is plugged in and turned on; inspect water line for kinks or blockages. |
| La producció de gel és lenta. | High ambient temperature; poor ventilation; dirty condenser. | Ensure unit is in a cool, well-ventilated area; clean condenser coils (consult technician if unsure). |
| Fuga d'aigua. | Loose water connections; clogged drain pipe; damaged water hose. | Tighten all water inlet and outlet connections; clear any blockages in the drain pipe; replace damaged hoses. |
| La unitat fa soroll. | Unit not level; fan obstruction; compressor noise. | Adjust leveling feet; check for obstructions around fan; some compressor noise is normal. If excessive, contact support. |
| Ice tastes bad. | Unclean water source; unit needs cleaning. | Use filtered or distilled water; run self-cleaning cycle; perform thorough manual cleaning. |
For additional troubleshooting or issues not listed, please contact customer support.
9. Especificacions
- Marca: Electàctic
- Nom del model: HBZB-30N
- Dimensions del producte: 14.96 "P x 16.34" W x 33.07" H
- Capacitat: 66 lliures (producció de gel per dia)
- Capacitat d'emmagatzematge de gel: 18 lliures
- Wattage: 260 watts
- Voltage: 115 Volts
- Refrigerant: R290a
- Material: Acer inoxidable
- Pes de l'article: 60.7 lliures
- Components inclosos: Ice shovel, water hose, ice basket*2
10. Garantia i Suport
Electactic is committed to customer satisfaction. For any quality problems, they offer 30 days of new replacement.
For further assistance, technical support, or warranty claims, please contact Electactic customer service directly. Refer to your purchase documentation for specific contact details.