TOTAL 20V Cordless Brushless Impact Wrench

1. Introducció

Thank you for choosing the TOTAL 20V Cordless Brushless Impact Wrench, Model TIWLI2085. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your tool. Please read it thoroughly before use and keep it for future reference.

Figure 1: The TOTAL TIWLI2085 impact wrench with its 20V battery installed, showcasing its compact design and readiness for operation.

2. Instruccions generals de seguretat

Seguiu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals quan feu servir eines elèctriques.

• Seguretat de l'àrea de treball: Mantingueu la vostra zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden als accidents. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Seguretat elèctrica: Eviteu el contacte corporal amb superfícies connectades a terra. No exposeu les eines elèctriques a la pluja ni a condicions humides.
• Seguretat personal: Porteu sempre protecció ocular. Feu servir protecció auditiva quan opereu durant períodes prolongats. Vestiu-vos correctament; eviteu roba ampla o joies. Assegureu-vos els cabells llargs.
• Ús i cura de l'eina: No forceu l'eina elèctrica. Feu servir l'eina correcta per a la vostra aplicació. Desconnecteu la bateria de l'eina elèctrica abans de fer qualsevol ajust, canviar accessoris o guardar eines elèctriques.
• Ús i cura de la bateria: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools. Do not open, crush, or expose battery packs to fire or high temperatures.

3. Producte acabatview

The TOTAL TIWLI2085 is a powerful 20V cordless brushless impact wrench designed for heavy-duty fastening and loosening applications. It features a robust brushless motor for extended tool life and efficiency, an integrated LED work light for improved visibility, and multiple speed/impact settings for versatile use.

Components inclosos:

• 1 x TOTAL 20V Cordless Brushless Impact Wrench (TIWLI2085)
• 2 x 4.0Ah Lithium-Ion Batteries (TFBLI2002)
• 1 x Charger (TFCLI2001E, 220-240V~50/60Hz)
• 3 x Deep Impact Sockets (22mm, 24mm, 27mm)
• 1 x bossa de transport

Figure 2: The TOTAL TIWLI2085 impact wrench displayed alongside the three included deep impact sockets (22mm, 24mm, 27mm), illustrating the complete kit.

4. Configuració

4.1 Càrrega de la bateria

1. Connect the charger (TFCLI2001E) to a standard 220-240V~50/60Hz power outlet.
2. Slide the battery pack (TFBLI2002) onto the charger until it clicks into place.
3. El llum indicador de càrrega del carregador s'il·luminarà, normalment en vermell durant la càrrega i en verd quan estigui completament carregat.
4. Un cop carregat completament, desconnecteu el carregador de la presa de corrent i retireu la bateria.

Nota: For optimal battery life, allow the battery to cool down before charging if it has been heavily used. Do not store batteries in a discharged state.

4.2 Attaching/Removing Sockets

1. Ensure the impact wrench is turned off and the battery is removed for safety.
2. Align the square drive of the desired impact socket (e.g., 22mm, 24mm, or 27mm) with the 1/2 inch square drive anvil on the tool.
3. Push the socket firmly onto the anvil until it locks into place. Some sockets may require pulling back a retaining ring or pin.
4. To remove, reverse the process, pulling back the retaining mechanism if present, and pull the socket off.

5. Instruccions de funcionament

5.1 Instal·lació de la bateria

Slide a charged battery pack into the base of the impact wrench handle until it clicks securely into place.

5.2 Engegada/Apagada i Control de Direcció

• On/Off: Squeeze the trigger switch to turn the tool on. Release the trigger to turn it off. The integrated LED work light will activate when the trigger is pressed.
• Control de direcció: Use the forward/reverse selector switch, typically located above the trigger, to choose the rotation direction (clockwise for fastening, counter-clockwise for loosening). Ensure the switch is fully engaged in the desired position before operating.

5.3 Speed and Impact Rate Adjustment

The TIWLI2085 features multiple speed and impact rate settings, allowing you to match the tool's performance to the task. Refer to the tool's controls for specific adjustment methods, which typically involve a button or switch to cycle through settings:

• Velocitat sense càrrega: 0-1600 / 0-2100 / 0-2400 RPM
• Taxa d'impacte: 0-1500 / 0-1800 / 0-2200 BPM

Start with a lower setting for delicate tasks or when first engaging a fastener, and increase as needed.

5.4 Fastening and Loosening

1. Select the appropriate socket for the fastener.
2. Set the direction switch to the desired mode (forward for fastening, reverse for loosening).
3. Col·loqueu el sòcol al fixador.
4. Squeeze the trigger to begin operation. Apply steady pressure to keep the socket engaged.
5. For fastening, tighten until the desired torque is achieved. For loosening, continue until the fastener breaks free.

Figure 3: The TOTAL TIWLI2085 impact wrench being used to fasten a lug nut on a car wheel, demonstrating its application for automotive tasks.

Figure 4: The TOTAL TIWLI2085 impact wrench in action, fastening a bolt on a metal workpiece, highlighting its versatility for various heavy-duty applications.

6. Manteniment

Regular maintenance ensures optimal performance and extends the life of your impact wrench.

• Neteja: Mantingueu les obertures de ventilació de l'eina netes i lliures de residus. Feu servir una esponja suau iamp drap per netejar la carcassa. No utilitzeu productes químics agressius ni netejadors abrasius.
• Cura de la bateria: Guardeu les piles en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes. No emmagatzemeu les piles completament descarregades durant períodes prolongats.
• Inspecció: Periodically inspect the square drive anvil for wear or damage. Check the power cord of the charger for any cuts or fraying.
• Lubricació: Aquesta eina compta amb un motor sense escombretes i components segellats, que no requereixen lubricació per part de l'usuari.

For any repairs or internal maintenance, contact qualified service personnel.

7. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb la clau d'impacte.

8. Especificacions

Technical specifications for the TOTAL 20V Cordless Brushless Impact Wrench TIWLI2085:

9. Garantia i Suport

TOTAL products are manufactured to high-quality standards. For warranty information, service, or technical support, please refer to the warranty card included with your product or contact your local TOTAL dealer or customer service center. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official TOTAL tools weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.