Introducció
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of the FSP460-60GLN Industrial Level Switching Power Supply. Please read this manual thoroughly before using the product and retain it for future reference.
Informació de seguretat
Always observe the following safety precautions to prevent injury or damage to the power supply and connected equipment:
- Risc elèctric: This unit operates with high voltages. Do not open the power supply casing. Demaneu totes les tasques de manteniment a personal qualificat.
- Ventilació: Ensure adequate airflow around the power supply. Do not block ventilation openings.
- Medi ambient: Operate the power supply in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
- Posada a terra: Always connect the power supply to a properly grounded electrical outlet.
- Cable d'alimentació: Use only the power cord supplied with the unit or an approved replacement. Do not overload power outlets.
- Instal·lació: Install the power supply securely within its intended enclosure.
Imatge: Primer pla view of the FSP460-60GLN power supply's warning label, indicating electrical hazards and compliance marks. This label provides critical safety information and operational specifications.
Configuració i instal·lació
Follow these steps for proper installation of the FSP460-60GLN power supply:
- Desembalatge: Carefully remove the power supply from its packaging. Inspect for any visible damage.
- Muntatge: Securely mount the power supply in the designated bay within your system chassis. Ensure all mounting screws are tightened.
- Connexions de cable:
- Connect the main 20+4 pin ATX connector to the motherboard.
- Connecteu el connector EPS/ATX de 4+4 pins de 12V a la presa d'alimentació de la CPU de la placa base.
- Connect SATA power connectors to storage devices (HDDs, SSDs).
- Connect Molex connectors to other peripherals as needed.
- Ensure all connections are firm and correctly oriented. Do not force connectors.
- Cable d'alimentació: Connect the AC power cord to the power supply's AC inlet, then plug the other end into a grounded electrical outlet.
- Comprovació inicial: Before powering on, double-check all connections to ensure they are secure and correctly installed.
Image: The FSP460-60GLN power supply unit, displaying its compact form factor and various output cables for connecting to a motherboard and peripherals.
Instruccions de funcionament
Once the power supply is correctly installed and all connections are made:
- Encès: Gireu l'interruptor principal de la part posterior de la font d'alimentació a la posició "ON" (I).
- Engegada del sistema: Initiate your system's power-on sequence (e.g., pressing the power button on your computer case).
- Apagar: To shut down the system, follow your operating system's shutdown procedure. Once the system is off, you may flip the power supply switch to 'OFF' (O) for complete power disconnection, especially during maintenance or extended periods of non-use.
Manteniment
Regular maintenance helps ensure the longevity and stable operation of your power supply:
- Neteja: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan and vents. Ensure the power supply is completely disconnected from the AC outlet before cleaning.
- Inspecció: Annually inspect power cables for any signs of wear, fraying, or damage. Replace damaged cables immediately.
- Medi ambient: Maintain a clean, cool, and dry operating environment to prevent overheating and component degradation.
Resolució de problemes
If you encounter issues with your FSP460-60GLN power supply, consider the following:
- Sense energia:
- Comproveu si el cable d'alimentació de CA està ben connectat tant a la font d'alimentació com a la presa de corrent.
- Ensure the power supply's main switch is in the 'ON' (I) position.
- Verifiqueu que la presa de corrent de la paret funciona connectant-hi un altre dispositiu.
- Confirm all internal power connectors (20+4 pin, 4+4 pin) are firmly seated.
- Inestabilitat del sistema/aturades aleatòries:
- Ensure adequate ventilation. Overheating can cause instability.
- Check if the power supply is overloaded. Compare your system's power requirements with the power supply's specifications.
- Inspeccioneu si hi ha connexions soltes.
- Sorolls inusuals:
- A rattling or grinding noise may indicate a faulty fan. Disconnect power immediately and contact support.
- Do not attempt to repair the power supply yourself.
Especificacions
The following are the technical specifications for the FSP460-60GLN Switching Power Supply:
| Característica | Especificació |
|---|---|
| Model | FSP460-60GLN |
| Tipus | Industrial Level Switching Power Supply |
| Entrada Voltage | 100-240V~ |
| Corrent d'entrada | 7.5-3.5A |
| Freqüència d'entrada | 50-60 Hz |
| Sortida +5V | 0.0A (min) / 16.0A (max) |
| Sortida +3.3V | 0.0A (min) / 12.0A (max) |
| Sortida +12V | 0.0A (min) / 18.0A (max) |
| Output -12V | 0.3A |
| Output +5VSB | 2.5A |
| Combined Power (+3.3V & +5V) | Màxim 152W |
| Potència total | 460W |
| ASIN | B0DHSYMG3N |
| Fabricant | Genèric |
| Data de primera disponibilitat | 23 de setembre de 2024 |
Garantia i Suport
For warranty information or technical support, please refer to the documentation provided by the seller or manufacturer at the time of purchase. You may also contact the seller directly through the platform where the product was acquired.
Note: As this is a generic product, specific warranty terms may vary. Always retain your proof of purchase.
