1. Introducció
This manual provides essential information for the safe and efficient operation of your LEESKY 2000 Watt Pure Sine Wave Power Inverter. This device converts 12V DC battery power into stable 120V AC power, suitable for a wide range of applications including RVs, solar systems, emergency backup, and off-grid power needs. Please read this manual thoroughly before installation and use.
Image 1.1: The LEESKY 2000 Watt Pure Sine Wave Power Inverter shown with its remote controller, battery cables, and grounding wire.
2. Informació de seguretat
Always prioritize safety when working with electrical equipment. Failure to follow these instructions may result in electric shock, fire, or damage to the inverter or connected devices.
- Assegureu-vos una ventilació adequada al voltant de l'inversor per evitar el sobreescalfament.
- Connect the inverter only to a 12V DC power source. Verify battery voltage abans de la connexió.
- Always connect the grounding wire to a proper earth ground.
- No exposeu l'inversor a l'aigua, la pluja o la humitat excessiva.
- Avoid operating the inverter in the presence of flammable fumes or gases.
- No obriu l'inversor casing. No hi ha peces que l'usuari pugui reparar a l'interior.
- Assegureu-vos el wat totaltage of connected appliances does not exceed the inverter's continuous output rating (2000W).
Image 2.1: The inverter incorporates seven major protection features: high temperature, short circuit, low/over voltage, overload, reverse polarity, high input voltage, and isolated input/output design.
3. Característiques del producte
The LEESKY 2000 Watt Pure Sine Wave Power Inverter is designed for reliable and efficient power conversion.
- Potència de sortida contínua: Provides 2000W of continuous pure sine wave power, with a peak overload capacity of 2200W.
- Vol. De sortidatage: Converts 12V DC to stable 110V/120V AC at 60Hz.
- Múltiples punts de venda: Equipped with three 15A AC outlets and one 2.4A USB port for versatile device charging.
- Ona sinusoïdal pura: Delivers clean power with less than 3% Total Harmonic Distortion (THD), ensuring compatibility with sensitive electronics like laptops, medical equipment, and audio systems without buzzing.
- UL-Certified Components: Constructed with UL-certified circuit boards and transformers for enhanced safety and reliability.
- Protecció integral: Features seven major protections including low-input voltage, high-input voltage, overload, short circuit, overheat, reverse polarity, and isolated input/output design.
- Sistema de refrigeració: Advanced dual intelligent cooling fans reduce machine temperature, prevent overheating, and operate quietly.
- Comandament a distància: Includes a 15ft remote controller for convenient power management from a distance.
Image 3.1: The inverter can power a variety of household and electronic devices, such as coffee makers, mini-fridges, microwaves, televisions, drones, and mobile phones. Ensure total wattage no supera els 2000W.
Image 3.2: Pure Sine Wave inverters are compatible with a wider range of sensitive electronics compared to modified sine wave inverters, providing stable and clean power.
4. Contingut del paquet
Verifiqueu que tots els elements estiguin presents al paquet en desempaquetar-lo:
- LEESKY 2000 Watt Pure Sine Wave Power Inverter
- 15ft Remote Controller
- 2ft Battery Cables (1x black, 1x red, 5AWG)
- 3ft Earth Cable (14AWG)
- 4x Shockproof Pads
- Manual d'instruccions (aquest document)
Image 4.1: The package includes the inverter unit, a remote controller with a 15ft cable, 2ft 5AWG battery cables (red and black), a 3ft 14AWG earth cable, and four shockproof pads.
5. Configuració i instal·lació
Follow these steps for safe and correct installation of your power inverter.
- Muntatge: Choose a dry, well-ventilated location for the inverter. Ensure there is sufficient space around the unit for airflow. Use the provided shockproof pads if desired.
- Connexió de la bateria:
- Ensure the inverter is turned off.
- Connecteu el cable vermell de la bateria al terminal positiu (+) de la bateria de 12 V i al terminal positiu (+) de l'inversor.
- Connecteu el cable negre de la bateria al terminal negatiu (-) de la bateria de 12 V i al terminal negatiu (-) de l'inversor.
- Tighten all connections securely to prevent loose contacts and arcing.
- Posada a terra: Connect the green/yellow earth cable to the grounding terminal on the inverter and to a reliable earth ground point (e.g., vehicle chassis, ground rod). This is crucial for safety.
Image 5.1: Proper connection of the grounding terminal is essential for electrical safety.
- Remote Controller Connection: Plug the 15ft remote controller cable into the designated port on the inverter. This allows you to power the inverter on/off and monitor battery status from a convenient location.
Image 5.2: The remote controller provides convenient access to power and battery status.
The inverter is compatible with various 12V battery types, including GEL, SLA, LI (Lithium), FLD, AGM, and CLA. Ensure your battery is fully charged before use.
Image 5.3: The inverter is designed to work with a range of 12V battery chemistries.
6. Instruccions de funcionament
Once properly installed, operating the inverter is straightforward.
- Encès: Press the power button on the inverter or the remote controller. The LED power indicator will illuminate green, indicating the inverter is active.
Image 6.1: The LED indicators provide visual feedback on the inverter's status.
- Connexió de dispositius: Plug your AC appliances into the 120V AC outlets and USB devices into the 2.4A USB port. Ensure the total power consumption does not exceed 2000W.
- Estat del monitor: The remote controller displays battery status. The inverter's digital display (if applicable) shows input voltage and power usage.
- Apagar: Press the power button again to turn off the inverter when not in use. This conserves battery power.
7. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del vostre inversor.
- Neteja: Keep the inverter clean and free from dust and debris. Use a dry cloth to wipe the exterior. Do not use liquid cleaners.
- Ventilació: Periodically check that the cooling fan vents are clear and unobstructed.
- Connexions: Regularly inspect battery and grounding cable connections for tightness and corrosion. Clean any corrosion with a wire brush.
- Emmagatzematge: Si guardeu l'inversor durant un període prolongat, desconnecteu-lo de la bateria i guardeu-lo en un lloc fresc i sec.
8. Solució De Problemes
Aquesta secció tracta problemes comuns que podeu trobar.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense potència de sortida | Inverter off; loose battery connections; low battery voltage; blown fuse | Turn on inverter; check and tighten battery cables; charge battery; inspect and replace internal fuses (professional service recommended). |
| Overload alarm/shutdown | Connected appliance wattage exceeds 2000W | Redueix la càrrega desconnectant alguns aparells. Reinicia l'inversor. |
| Overheat alarm/shutdown | Poor ventilation; blocked cooling fans; excessive ambient temperature | Ensure clear airflow around the inverter; clean fan vents; move inverter to a cooler environment. Allow unit to cool before restarting. |
| Vol baixtage alarma/apagada | Bateria voltage massa baix | Recharge or replace the 12V battery. |
| Vol. Alttage alarma/apagada | Vol d’entradatage massa alt | Verifiqueu el vol d'entradatage from the battery is within the specified range (typically 10.5V-15V for 12V systems). |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
9. Especificacions
| Especificació | Valor |
|---|---|
| Nom del model | 2000W 12V Pure Sine Wave Power Inverter (LS-2000YAR-OR) |
| Potència contínua | 2000 watts |
| Potència màxima | 2200 Watts (Overload) |
| Entrada Voltage | 12V DC |
| Vol. De sortidatage | 110V-120V AC |
| Freqüència de sortida | 60 Hz |
| Forma d'ona de sortida | Pure Sine Wave (<3% THD) |
| Preses de corrent altern | 3 (15A cadascun) |
| Port USB | 1 (2.4A) |
| Eficiència de conversió | Fins al 90% |
| Dimensions del producte | 15 x 7.9 x 3.8 polzades |
| Pes de l'article | 11.86 lliures |
| Fabricant | Leesky |
10. Garantia i Suport
Your LEESKY 2000 Watt Pure Sine Wave Power Inverter comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures reliable operation under normal use conditions.
For technical assistance, troubleshooting, or warranty claims, please contact LEESKY customer support. Have your model number (LS-2000YAR-OR) and purchase information ready when contacting support.
Image 10.1: LEESKY offers a 12-month warranty and dedicated customer support, backed by reliable UL components and product liability insurance.
