1. Introducció
The AsperX AX2000 is a portable car battery jump starter designed to provide a quick and safe solution for starting vehicles with dead batteries. It also functions as a portable power bank and features an integrated LED light for various situations. This manual provides essential information for the safe and effective use of your AsperX AX2000.
Figure 1: AsperX AX2000 Jump Starter highlighting 12 Volts, 2000 Amps, Lithium Powered, 8.0L Gas, and 6.5L Diesel engine compatibility.
2. Què hi ha a la caixa
Si us plau, comproveu el contingut del paquet en rebre'l per assegurar-vos que hi hagi tots els elements:
- AsperX AX2000 Car Jump Starter Unit
- Cable de salt intel·ligent amb Clamps
- Cable de càrrega USB
- Estoig de transport portàtil
- Manual d'usuari (aquest document)
Figure 2: Included items: Jump Starter, Smart Jump Cable, USB Charging Cable, Portable Carrying Case, and User Manual.
3. Característiques del producte
- Arrencada potent: Delivers 2000A peak current, capable of starting up to 8.0L gas or 6.5L diesel engines. Operates effectively in extreme temperatures (-4°F to 140°F).
- Llum LED multimode: Features three modes: Lighting (constant illumination), Flash, and SOS for emergency signaling.
- Banc d'energia portàtil: Equipped with a quick-charge USB port to charge various electronic devices such as cell phones, tablets, and digital cameras.
- 1.4" LCD Display: Provides clear indication of usage status and remaining power.
- Proteccions de seguretat integrals: Incorporates spark-proof technology, reverse polarity protection, low-temperature protection, high-temperature protection, and over-load protection.
Figura 3: Mésview of the jump starter unit showing Jumper Cable ECS Output, USB Output, Type-C Input, Power Button, LED Screen, and LED Light.
4. Informació de seguretat
Llegiu totes les advertències i instruccions de seguretat abans d'utilitzar aquest producte.
- Do not attempt to jump start an engine that exceeds the maximum displacement supported by the jump starter.
- Do not crank the engine for more than 3 seconds at a time. Allow the jump starter to cool down for at least 1 minute between each start attempt.
- Ensure the device has at least 50% power before use.
- Connecteu sempre el cl vermellamp al terminal positiu (+) i al cl negreamp al terminal negatiu (-) de la bateria del vehicle.
- Avoid touching the red and black clamps junts per evitar espurnes.
- No exposeu el producte a la pluja o a la humitat.
- Mantenir fora de l'abast dels nens.
- Emmagatzemar en un lloc fresc i sec quan no s'utilitzi.
Figure 4: Visual representation of comprehensive safety protections including over charge, over current, short circuit, reverse polarity, low temp, high temp, over voltage, and over load protection.
5. Configuració
5.1 Càrrec inicial
Before first use, fully charge the AsperX AX2000 jump starter. Connect the provided USB charging cable to the Type-C input port on the jump starter and plug the other end into a 5V USB adapter (not included). The LCD display will show the charging progress.
Figure 5: Charging the AsperX AX2000 unit using a USB-C cable. A wall charger is not included.
6. Instruccions de funcionament
6.1 Arrencada amb salt d'un vehicle
- Insert the Smart Jump Cable: Plug the blue end of the smart jump cable into the jump starter's dedicated port. Ensure a secure connection.
- Connectar Clamps a la bateria: Enganxeu el cl vermell (+).amp al terminal positiu de la bateria del vehicle i al born negre (-)amp to the negative terminal. The smart jump cable indicator should show a green light, indicating a correct connection. If it shows red or flashes, check the connections.
- Press 'BOOST' Button (if needed): If the indicator light is not green, or if the battery is deeply discharged, press the 'BOOST' button on the smart jump cable for 3 seconds until the green light illuminates.
- Comença el teu cotxe: Return to your vehicle and start the engine within 30 seconds of the green light appearing.
- Remove Jump Cable: Once the engine starts, immediately remove the smart jump cable from the vehicle battery terminals, then disconnect it from the jump starter unit.
Figure 6: Step-by-step visual guide for jump starting: 1. Insert jump cable, 2. Connect clamps and press 'BOOST', 3. Start car engine, 4. Remove jump cable.
6.2 Ús com a bateria externa portàtil
The AsperX AX2000 can charge your electronic devices via its USB output port.
- Connecteu el cable de càrrega USB del dispositiu al port de sortida USB de l'arrencador de bateria.
- The jump starter will automatically begin charging your device. The LCD screen will show the remaining power.
Figure 7: The AsperX AX2000 functioning as a portable emergency power bank, charging a mobile phone.
6.3 Ús de la llum LED
The integrated LED light has three modes: constant illumination, strobe, and SOS.
- Press and hold the power button for a few seconds to turn on the LED light (constant illumination mode).
- Press the power button again to cycle through the modes: Strobe → SOS → Off.
Figure 8: Illustration of the ultra-bright LED light with Flashlight, SOS, and Strobe modes.
6.4 Illustrative Videos (Similar Products)
The following videos demonstrate the functionality of similar jump starter products and are provided for illustrative purposes only. Actual product appearance and specific features may vary.
Video 1: Illustrative guide on how to jump start a car using a portable jump starter (NEXPOW G17).
Video 2: Illustrative overview of a portable car battery jump starter, including unboxing and usage (GREPRO GP196).
7. Manteniment
- Càrrega: Recharge the unit every 3-6 months, even if not used, to maintain battery health.
- Neteja: Netegeu la unitat amb un drap sec i suau. No utilitzeu productes químics agressius ni materials abrasius.
- Emmagatzematge: Store the jump starter in its portable carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El vehicle no arrenca | Low charge on jump starter | Assegureu-vos que l'arrencador estigui carregat com a mínim al 50%. |
| El vehicle no arrenca | cl. incorrectaamp connexió | Comprova aquest cl vermellamp està en positiu (+) i cl negreamp is on negative (-). Smart cable indicator should be green. |
| El vehicle no arrenca | Engine cranked too long | Do not crank for more than 3 seconds. Wait 1 minute before re-attempting. |
| Smart cable indicator shows red/flashing | Polaritat inversa o curtcircuit | Desconnectar clamps i torneu a connectar correctament. Assegureu-vos de clamps do not touch. |
| Jump starter not charging devices | USB cable or device issue | Try a different USB cable or device to confirm functionality. |
9. Especificacions
- Model: AX2000
- Punt actual: 2000 Amps
- Capacitat de la bateria: 10000 milionsamp Hores (polímer de liti)
- Inici Voltage: 12 Volts
- Compatibilitat del motor: Up to 8.0L Gas or 6.5L Diesel Engines
- Temperatura de funcionament: -4 °F a 140 °F (-20 °C a 60 °C)
- Dimensions del producte: 16.5 x 8.26 x 3.96 cm
- Pes de l'article: 500 g
- Entrada: USB tipus C
- Sortida: USB-A
- Fabricant: AsperX
- País d'origen: Xina
Figura 9: Intern view of the jump starter highlighting key components and ports, including the 2000A peak current battery.
10. Garantia i assistència
The AsperX AX2000 Jump Starter comes with a Garantia del fabricant de 24 mesos. For any product inquiries, technical support, or warranty claims, please contact AsperX customer service through your retailer or the official AsperX weblloc.
