Kavolet AC-04 Photography Light Trigger User Manual

Introducció

The Kavolet AC-04 is a 4-channel wireless flash trigger system designed for DSLR cameras equipped with a single-point hot shoe. This system allows for remote synchronization of studio strobes and speedlights, providing photographers with enhanced flexibility and control over their lighting setups. It features a maximum synchronous speed of 1/250 second and offers a reliable working distance of up to 30 meters in open areas without interference.

Contingut del paquet

Si us plau, verifiqueu que tots els elements següents estiguin inclosos al vostre paquet:

• 1 x transmissor
• 1 x receptor
• 1 x Adapter (3.5mm to 6.35mm)
• 1 x Cable (for connecting camera with transmitter)

Image: The Kavolet AC-04 flash trigger kit, showing the transmitter, receiver, sync cable, and 3.5mm to 6.35mm adapter.

Configuració

1. Instal·lació de la bateria del transmissor: The transmitter requires a 23A / 12V battery. Open the battery compartment, insert the battery with the correct polarity, and close the compartment.
2. Muntatge del transmissor: Slide the transmitter onto your DSLR camera's hot shoe. Ensure it is securely seated.
   

   Image: The Kavolet AC-04 transmitter attached to the hot shoe of a DSLR camera.

3. Connexió d'alimentació del receptor: Connect the receiver to a 110-220V AC power source.
4. Connecting Receiver to Flash Unit: Connect the receiver to your studio strobe or speedlight's sync port. Use the provided 3.5mm to 6.35mm adapter if your flash unit requires the larger jack.
   

   Image: The Kavolet AC-04 receiver connected to a studio strobe, illustrating the setup for remote flash triggering.
5. Connexió amb cable (opcional): If your camera lacks a hot shoe or for a wired connection, use the provided cable to connect the camera's PC sync port (if available) directly to the transmitter.
6. Selecció de canals: Both the transmitter and receiver feature channel selection switches. Ensure that both units are set to the same channel (1-4) to establish a connection and avoid interference from other wireless devices.

Instruccions de funcionament

1. Encès: Turn on both the camera and the flash unit connected to the receiver. Ensure the transmitter and receiver are also powered on.
2. Verify Channel Match: Double-check that the channel switches on both the transmitter and receiver are set to the identical channel number.
3. Test Firing: Take a test shot with your camera. The flash unit connected to the receiver should fire simultaneously. If it does not, refer to the Troubleshooting section.
4. Synchronous Speed: The AC-04 supports a maximum synchronous speed of 1/250 second. Adjust your camera's shutter speed accordingly for optimal flash synchronization.
5. Distància de treball: The system operates effectively up to 30 meters in open, interference-free environments. Maintain a clear line of sight between the transmitter and receiver for best performance.

Manteniment

• Neteja: Feu servir un drap suau i sec per netejar l'exterior del transmissor i el receptor. Eviteu utilitzar productes químics agressius o materials abrasius.
• Emmagatzematge: When not in use for extended periods, store the units in a dry, cool place away from direct sunlight and moisture.
• Substitució de la bateria: Replace the 23A / 12V battery in the transmitter when its performance degrades or the indicator light suggests low power.
• Protecció del medi ambient: Protect the units from extreme temperatures, dust, and water.

Resolució de problemes

Especificacions

Garantia i Suport

This product is covered by the standard warranty provided by the seller at the time of purchase. For specific warranty terms, return policies, or technical assistance, please refer to your purchase documentation or contact Kavolet customer service directly. Keep your proof of purchase for any warranty claims.