1. Producte acabatview
The Kingroon Filament Dryer Box is designed to remove moisture from 3D printer filaments, improving print quality and preventing common issues such as stringing, clogging, and poor adhesion. This device features 360° surround heating, an integrated fan for efficient moisture discharge, and adjustable temperature and time settings.
Imatge 1.1: Frontal view of the Kingroon Filament Dryer Box. The unit is white with a translucent grey lid, featuring a digital display and three control buttons on the front panel.
Image 1.2: Diagram illustrating the main components of the filament dryer box, including the translucent upper lid, wet gas outlet, wire disc, display, silk outlet, function keys, temperature-resistant bottom shell, and door mat.
Image 1.3: Illustration demonstrating the 360-degree circulating constant temperature heating system within the dryer box, showing heat distribution from 50-68°C and the high-efficiency ball fan.
2. Instruccions de seguretat
- Ensure the device is placed on a stable, flat, and heat-resistant surface.
- No bloquegeu les obertures de ventilació durant el funcionament.
- Mantingueu el dispositiu allunyat de l'aigua o altres líquids.
- Do not touch the heating elements during or immediately after operation.
- Desendolleu el dispositiu de la presa de corrent quan no l'utilitzeu o abans de netejar-lo.
- This device is intended for drying 3D printer filaments only. Do not use it for other purposes.
- Mantenir fora de l'abast dels nens.
3. Configuració
- Desembalatge: Carefully remove the filament dryer box from its packaging. Inspect for any damage.
- Col·locació: Place the unit on a stable, level surface near your 3D printer or in a well-ventilated area.
- Connexió d'alimentació: Connect the provided power adapter to the DC24V input port on the dryer box, then plug the adapter into a standard electrical outlet.
- Carregant el filament:
- Open the translucent upper lid.
- Place your filament spool onto the wire disc inside the dryer box. The dryer supports 0.5KG and 1KG filament spools with a maximum tray size of Ø200x73(H)mm.
- If you intend to print directly from the dryer, feed the filament through the silk outlet.
- Close the upper lid securely to ensure a sealed environment.
Image 3.1: Illustration showing how to load a filament spool into the dryer box and highlighting compatibility with 1.75mm, 2.85mm, and 3.00mm filament diameters, as well as various material types.
4. Instruccions de funcionament
The Kingroon Filament Dryer Box features a digital display and three function keys for control: Mode (Switch), Increase, and Decrease.
Image 4.1: Close-up of the control panel showing the digital display for temperature and time, along with the three function keys: Mode (Switch), Increase, and Decrease.
- Encès: After connecting the power, the display will illuminate.
- Configuració de la temperatura:
- Press the "Mode" button to cycle through settings. When the temperature indicator is active, use the "Increase" and "Decrease" buttons to adjust the desired drying temperature.
- Available temperature settings are 50℃, 60℃, and 70℃.
- Refer to the Recommended Drying Temperature Table below for optimal settings based on filament type.
- Configuració del temps d'assecat:
- Press the "Mode" button again to switch to the time setting. When the time indicator is active, use the "Increase" and "Decrease" buttons to set the drying duration from 0 to 24 hours.
- The dryer will automatically begin heating once the time is set.
- Seguiment: The display shows real-time temperature and a countdown of the drying time.
- Finalització: The device will automatically stop heating once the set time has elapsed.
4.1 Recommended Drying Temperature and Time
The following table provides general guidelines for drying various filament types. Optimal settings may vary based on filament brand, ambient humidity, and desired dryness level.
Image 4.2: Table displaying recommended drying temperatures and minimum drying times for common 3D printing filaments such as PLA, TPU, PP, ABS, ASA, PETG, PC, and PA.
| Tipus de filament | Temperatura | Temps mínim |
|---|---|---|
| PLA | 50℃ | ≥4h |
| TPU | 55℃ | ≥4h |
| PP | 55℃ | ≥6h |
| ABS | 60℃ | ≥2h |
| ASA | 60℃ | ≥4h |
| PETG | 65℃ | ≥2h |
| PC | 65℃ | ≥8h |
| PA | 65℃ | ≥12h |
Note: The maximum temperature can reach 70℃. The drying degree reaches excellent effect after 2 hours for some filaments under normal temperature test, normal heating for 30 minutes, and humidity drop.
5. Manteniment
- Neteja: Ensure the device is unplugged and cooled down before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Emmagatzematge: When not in use for extended periods, store the dryer box in a cool, dry place, away from direct sunlight and dust.
- Filament Spool: Regularly check the wire disc for any debris or filament residue and clean as necessary to ensure smooth rotation.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Sense font d'alimentació. | Check if the power adapter is securely plugged into both the device and the electrical outlet. Ensure the outlet is functional. |
| Filament is not drying effectively. | Incorrect temperature/time settings; lid not closed properly; extremely high ambient humidity. | Verify temperature and time settings according to the filament type (refer to Table 4.1). Ensure the lid is fully closed. Increase drying time if ambient humidity is very high. |
| Display shows error or abnormal readings. | Mal funcionament intern. | Unplug the device, wait 5 minutes, then plug it back in. If the issue persists, contact customer support. |
| Fan is noisy or not operating. | Obstrucció o mal funcionament del ventilador. | Ensure no foreign objects are obstructing the fan. If the fan is not operating or is excessively noisy, contact customer support. |
7. Especificacions
Image 7.1: Diagram showing the physical dimensions of the dryer box along with a table of key product specifications.
| Característica | Detall |
|---|---|
| Model de producte | sku-lzw (3D Printing Filament Dryer Box) |
| Voltage | DC24V ~ 2A |
| Potència nominal | 48W |
| Heating Time Setting | 1-24 hores |
| Temperatura de calefacció | ~50-68℃ (Max 70℃) |
| Dimensions del producte (L×W×H) | 248 mm × 125 mm × 242 mm |
| Pes del producte | ~1125g (2.2 pounds) |
| Compatibilitat del diàmetre del filament | 1.75 mm, 2.85 mm, 3.00 mm |
| Max Spool Size | Ø200mm × 73mm (H) for 0.5KG/1KG spools |
8. Garantia i Suport
Kingroon provides customer support for this product. If you encounter any issues or have questions regarding the Kingroon Filament Dryer Box, please contact Kingroon customer service.
- For assistance, refer to the contact information provided with your purchase or visit the official Kingroon weblloc.
- Conserveu el vostre comprovant de compra per a reclamacions de garantia.
Note: Specific warranty terms and conditions may vary. Please consult the warranty card included with your product or the manufacturer's official channels for detailed information.