MySmile LP233 Pro Countertop Water Flosser User Manual

Introducció

This manual provides instructions for the safe and effective use of your MySmile LP233 Pro UVC Sterilizable Countertop Water Flosser. Please read all instructions carefully before operation and retain this manual for future reference.

Figure 1: MySmile LP233 Pro Water Flosser main unit.

Informació important de seguretat

ADVERTÈNCIA: Per reduir el risc de descàrrega elèctrica, cremades, incendi o lesions a les persones:

• Do not use with broken or damaged parts.
• Mantenir allunyat dels nens.
• Do not use in the shower or near water.
• Do not look directly into the UV sterilizer light.
• Ensure the device is unplugged before cleaning or maintenance.
• Utilitzeu-lo només tal com s’indica en aquest manual.

Producte acabatview

The MySmile LP233 Pro is a countertop water flosser designed for effective oral hygiene. It features a large water reservoir, multiple operating modes, and UVC sterilization for jet tips.

Components

• Main Unit with Water Reservoir (800ML capacity)
• Detachable Handle with Pressure Control
• Panell de visualització digital
• UVC Sterilization Compartment
• Hydrogen-Rich Water Filter
• Assorted Jet Tips (6 included)

Figura 2: Mésview of the MySmile LP233 Pro Water Flosser and its main parts.

Figura 3: Intern view showing the pump mechanism and product dimensions.

Figure 4: Detachable magnetic handle with integrated pressure controls.

Configuració i primer ús

Follow these steps to set up your MySmile LP233 Pro Water Flosser for the first time:

1. Place the unit on a flat, stable surface near an electrical outlet.
2. Open the water tank lid and fill the reservoir with 800ml of lukewarm water. Ensure the hydrogen-rich water filter is properly installed.


Figure 5: Filling the water reservoir with water.

3. Select the desired jet tip and firmly insert it into the handle until it clicks into place.
4. Connecteu el cable d'alimentació a una presa de corrent.
5. Press the ON/OFF button on the digital display to power on the device.
6. Before first use, run a full tank of water through the unit to prime the pump and flush out any manufacturing residue.

Operating Modes and Pressure Levels

The MySmile LP233 Pro offers three distinct operating modes and multiple pressure levels to customize your flossing experience:

Figure 6: Digital display panel for mode and pressure selection.

• Mode normal: Offers 10 pressure levels (1-10) for daily cleaning, effectively removing food debris and plaque.
• Mode de pols: Provides 3 pressure levels (1-3) with a strong-weak cycle, ideal for gum massage and for individuals with mild periodontitis.
• Mode infantil: Features 3 pressure levels (1-3), designed for children above 6 years old under adult supervision, offering a gentle cleaning experience.

Use the touch-sensitive panel on the main unit or the pressure adjustment buttons on the handle to select your desired mode and pressure level. The digital display will clearly indicate the current settings.

Utilitzant el fil d'aigua

1. Lean over the sink and place the jet tip into your mouth, aiming the stream at your gumline at a 90-degree angle.
2. Turn on the device and allow the water to flow from your mouth into the sink.
3. Move the tip along your gumline, pausing briefly between teeth.
4. The magnetic handle allows for easy removal and reattachment. You can also pause your flossing routine at any time by clicking the button on the handle.
5. For sensitive teeth, activate the heating function to warm the water to approximately 20±2°C (68±4°F) in about 20 seconds.

Manteniment i Neteja

Esterilització UVC

The device includes a UVC sterilizer light in the side storage compartment to eliminate 99.99% of bacteria from your jet tips. After use, place the tips in the compartment and activate the UVC light for sterilization. The magnetic control automatically shuts off power when the door is open for safety.

Figure 7: UVC sterilization compartment for jet tips.

Filtre d'aigua

The integrated hydrogen-rich water filter helps remove impurities and boost hydrogen content in the water. Replace the filter periodically according to usage or when water quality appears diminished. Refer to the filter replacement guide for detailed instructions.

Figure 8: Hydrogen-rich water filter for improved water quality.

Neteja general

• Desconnecteu sempre el dispositiu abans de netejar-lo.
• Buidar l'aigua restant del dipòsit després de cada ús.
• Netegeu l'exterior de la unitat amb un damp tela. No submergiu la unitat principal a l'aigua.
• Clean the water reservoir and jet tips regularly with warm, soapy water. Rinse thoroughly.
• Do not leave water in the tank for extended periods to prevent mineral buildup.

Resolució de problemes

If you encounter issues with your MySmile LP233 Pro, refer to the following common solutions:

If the issue is not resolved by the above steps, please contact MySmile customer support for assistance.

Especificacions

Garantia i assistència al client

For warranty information, product support, or to purchase replacement parts and accessories, please visit the official MySmile weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Avís legal: Les declaracions sobre suplements dietètics no han estat avaluades per la FDA i no tenen la intenció de diagnosticar, tractar, curar o prevenir cap malaltia o afecció de salut.