TMEHM Fireplace Flame Air Diffuser Humidifier (Model A4) Instruction Manual

Introducció

This manual provides detailed instructions for the safe and effective use of your TMEHM Fireplace Flame Air Diffuser Humidifier, Model A4. Please read this manual thoroughly before operation and retain it for future reference.

Informació important de seguretat

Si us plau, observeu les següents pautes de seguretat:

• The maximum water capacity of the water tank is 150 milliliters. Do not exceed the maximum level mark, as it may affect the atomization effect.
• Use only clean water for the humidifier to prevent damage from impurities.
• Use only mild or water-soluble essential oils. Avoid corrosive or highly concentrated oils, which may damage internal components.
• A power adapter is not included. It is recommended to use an adapter with an output of 1A-2A. High-power adapters are prohibited to avoid potential damage.
• There are also physical buttons on the back of the device for control.

Producte acabatview

Familiaritzeu-vos amb els components del vostre humidificador:

Image: TMEHM Fireplace Flame Air Diffuser Humidifier with dimensions (10.3"L x 4"W x 3.8"H) and notes on quiet operation (approx. 30dB).

Instruccions de configuració

Follow these steps to set up your humidifier:

1. Col·locació: Col·loqueu l'humidificador sobre una superfície plana i estable.
2. Connexió d'alimentació: Connect the USB-C power cable to the device and a compatible 1A-2A power adapter (not included).
3. Omplir el dipòsit d'aigua: Carefully remove the top cover. Fill the 150ml water tank with clean water. Ensure the water level does not exceed the 'Max line' indicator.


Image: Visual guide demonstrating the correct method for filling the water tank, avoiding the fan area.

4. Afegeix oli essencial: Add 3-5 drops of your preferred essential oil into the water tank.


Image: A hand carefully adding essential oil into the humidifier's water reservoir.

5. Substituïu la coberta: Torneu a col·locar la coberta superior de manera segura a l'humidificador.

Instruccions de funcionament

Your humidifier can be operated using the included remote control or the physical buttons on the device.

Funcions de control remot

Image: The humidifier and its remote control, detailing the functions of each button.

• Encès/apagat: Premeu el botó d'engegada (⏻) per encendre o apagar el dispositiu.
• Control de la boira: Press the mist button (SSS) to activate or deactivate the mist function. Press again to cycle through mist light colors.
• Flame Light Control: Premeu el botó de llum (☀) to change the flame light colors. The device features seven-color cycling, breathing mode, and single-color fixation.


Image: The humidifier showcasing its 7-color changing flame and mist effects.

• Funció de temporitzador: Premeu el botó del temporitzador (◷) to set the operating time for 2, 4, or 5 hours. The device will automatically shut off when the timer expires or when water runs out.

Physical Button Controls

The device also has physical buttons on the back for control, offering similar functions to the remote.

Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del vostre humidificador.

• Neteja: Clean the water tank and mist outlet regularly to prevent mineral buildup and ensure proper mist diffusion. Use a soft cloth and mild detergent. Rinse thoroughly.
• Qualitat de l'aigua: Always use clean water. Distilled water is recommended to minimize mineral buildup.
• Residus d'oli essencial: If using essential oils, clean the tank frequently to prevent oil residue buildup, which can affect performance.

Resolució de problemes

Si teniu problemes, consulteu els següents problemes i solucions habituals:

• No Mist/Weak Mist:
  • Check water level; refill if low.
  • Ensure water level is not too high (above 'Max line'). If too much water, pour some out.
  • Clean the mist outlet and ultrasonic plate for any blockages or mineral buildup.
  • Ensure only water-soluble essential oils are used.
• El control remot no respon:
  • Check the remote control battery (1 LR44 battery required). Replace if necessary.
  • Ensure the plastic insulation tab is removed from the remote's battery compartment.
  • Try operating the device using the physical buttons on the back.
• El dispositiu no s'encén:
  • Verify the power cable is securely connected to both the device and a compatible 1A-2A power adapter.
  • Assegureu-vos que la presa de corrent funcioni.
• Soroll inusual:
  • A faint humming sound (approx. 30dB) may occasionally occur during misting. This is a normal part of the operation.

Especificacions

Garantia i Suport

For any questions or concerns regarding your TMEHM product, please contact the seller 'TMEHM' through your order page or by clicking on 'TMEHM' on the product page. Our support team aims to respond within 24 hours.