FLEXISPOT Dual Motor L-Shaped Standing Desk User Manual

1. Introducció

Thank you for choosing the FLEXISPOT Dual Motor L-Shaped Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read these instructions thoroughly before use and retain them for future reference.

Image 1.1: The FLEXISPOT Dual Motor L-Shaped Standing Desk, showcasing its spacious white desktop and sturdy frame.

Informació important de seguretat

• Seguiu sempre atentament les instruccions de muntatge per evitar lesions.
• Do not use the desk until it is fully assembled and stable.
• Gradually increase the time spent standing to allow your body to adjust.
• Do not use the desk if it appears damaged or unstable.
• Keep the work surface clear of objects that could fall and cause injury.
• Always use the control panel to adjust the desk height slowly and smoothly.

2. Muntatge i muntatge

Assembly of the FLEXISPOT Dual Motor L-Shaped Standing Desk is required. Please refer to the separate assembly guide included with your product for detailed, step-by-step instructions. Ensure all components are present before beginning assembly.

Notes clau del muntatge:

• The assembly process typically involves only two types of screws for simplicity.
• Ensure all connections are secure but do not overtighten until instructed.
• After initial setup, perform a calibration: press and hold the 'Reset' button (often the middle button on the control panel) until the desk begins to move, then release. This synchronizes the motors.

Image 2.1: Illustration of the desk's strong steel frame structure, highlighting its stability.

3. Instruccions de funcionament

Your FLEXISPOT L-Shaped Standing Desk features an intuitive control panel for easy height adjustment and memory functions.

Tauler de control acabatview

Image 3.1: The intelligent control panel with clearly labeled buttons.

• Fletxa amunt (▲): Press to raise the desk. Hold to continue raising.
• Fletxa avall (▼): Press to lower the desk. Hold to continue lowering.
• Reset (O): Used for initial calibration or to reset the desk. Press and hold until the desk moves slightly.
• Sitting Preset (👧): Press once to move the desk to your saved sitting height.
• Standing Preset (👤): Press once to move the desk to your saved standing height.

Configuració de preajustos de memòria

1. Adjust the desk to your desired sitting height using the Up/Down arrows.
2. Press and hold the 'Sitting Preset' button (👧) for approximately 5 seconds until the display blinks or indicates the height is saved.
3. Repeat the process for your desired standing height using the 'Standing Preset' button (👤).

Once saved, you can effortlessly switch between your preferred sitting and standing positions with a single touch.

Image 3.2: The digital control panel allows for saving preferred height settings.

4. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre escriptori de peu.

Neteja

• Netegeu la superfície de l'escriptori amb un drap suau iamp drap i detergent suau. Eviteu els netejadors abrasius.
• Clean the metal frame with a dry or slightly damp tela.
• Ensure no liquids enter the control panel or motor housing.

Lubricació

• If you notice squeaking during height adjustments, apply white lithium grease to the moving parts within the leg columns. This can typically be done by spraying into the four holes located on the leg mechanisms.

Image 4.1: The desk is certified for low formaldehyde emissions, indicating environmentally conscious material use.

5. Solució De Problemes

This section addresses common issues you might encounter with your standing desk.

Problemes comuns i solucions:

• Desk is not moving or unresponsive:
  - Comproveu totes les connexions d'alimentació per assegurar-vos que estiguin ben connectades.
  - Perform a reset by pressing and holding the 'Reset' button on the control panel until the desk moves slightly.
• Squeaking during height adjustment:
  - Apply white lithium grease to the internal moving parts of the leg columns. Refer to the Maintenance section for details.
• Desk moves slowly:
  - The desk's adjustment speed is designed for smooth and safe operation. While it may seem slow to some users, this is generally normal behavior.
• Desk is unstable or wobbles:
  - Ensure all assembly screws are tightened properly. Do not overtighten.
  - Verify the desk is on a level surface. Adjust the leveling feet if necessary.

If you encounter an issue not listed here or if the problem persists after attempting these solutions, please contact customer support.

6. Especificacions

Detailed technical specifications for the FLEXISPOT Dual Motor L-Shaped Standing Desk.

Image 6.1: Desktop and frame dimensions.

7. Garantia i Suport

Informació de la garantia

The FLEXISPOT Dual Motor L-Shaped Standing Desk comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the official warranty documentation provided with your purchase or visit the FLEXISPOT official weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Atenció al client

For technical assistance, missing parts, or any questions regarding your FLEXISPOT product, please contact FLEXISPOT customer support. Contact information can typically be found on the manufacturer's weblloc web o en els materials d'embalatge.

When contacting support, please have your product model number (B0DKNW158N) and purchase date readily available.