Evenflo GoTime Sport Booster Car Seat User Manual

Introducció

The Evenflo GoTime Sport Booster Car Seat is designed to provide safety, comfort, and convenience for your growing child. This manual provides essential information for proper installation, use, and maintenance of your booster seat. Please read all instructions carefully before using the product and keep this manual for future reference.

This booster seat is suitable for children weighing 40 to 120 lb, with a height of 44 to 57 inches, and a minimum age of 4 years.

Informació important de seguretat

ADVERTÈNCIA: Si no seguiu aquestes instruccions, el vostre fill podria patir lesions greus o la mort.

• Always secure your child in the booster seat using the vehicle's lap and shoulder belt system.
• Ensure the vehicle's shoulder belt is properly positioned across the center of your child's shoulder and chest, not on the neck or off the shoulder.
• The lap belt must be low on the hips, touching the child's thighs.
• Never use this booster seat with only a lap belt.
• Do not use this booster seat if your child is under 4 years of age, weighs less than 40 lb, or is shorter than 44 inches.
• Do not use this booster seat if your child weighs more than 120 lb or is taller than 57 inches.
• No deixeu mai el vostre fill sense vigilància al seient elevador.
• Inspect the booster seat regularly for damage or wear. Discontinue use if damaged.
• Refer to your vehicle owner's manual for specific information regarding child restraint installation.

Característiques del producte

• Disseny de seguretat millorat: Features a deep design with overlapping head and body sides for added support and meets or exceeds all applicable federal safety standards.
• One-Hand Height Adjustment: Easily adjust the headrest to 7 different positions with one hand to ensure a proper fit for your growing child.
• Two Modes of Use: Seamlessly transitions from a high-back booster to a backless booster to accommodate children as they grow.
• Portavasos integrats: Dual cup holders keep drinks and snacks conveniently within reach.
• Machine-Washable Fabric: The durable padded seat fabric is removable and machine-washable for easy cleaning.

Components

The Evenflo GoTime Sport Booster Car Seat consists of the following main components:

• Booster Seat Backrest (High-Back)
• Booster Seat Base (with integrated cup holders)
• Clip de posicionament del cinturó d'espatlla

Figura 1: Frontal view of the assembled Evenflo GoTime Sport Booster Car Seat. This image shows the full high-back booster with its patterned fabric and dual cup holders.

Figura 2: posterior view of the Evenflo GoTime Sport Booster Car Seat, showing the plastic shell and adjustment mechanism.

Muntatge i muntatge

High-Back Booster Assembly

1. Align the backrest with the base. There are slots on the backrest that fit into corresponding pegs on the base.
2. Push the backrest firmly down onto the base until it clicks securely into place. Ensure there is no gap between the backrest and the base.
3. Verify the connection by gently pulling up on the backrest. It should not separate from the base.

Figure 3: The booster seat backrest detached from the base, illustrating the two main components for assembly or conversion to backless mode.

Backless Booster Conversion

To convert the high-back booster to a backless booster:

1. Locate the release mechanism at the back or bottom of the backrest where it connects to the base.
2. Follow the specific instructions in your product manual to disengage the backrest from the base. This typically involves squeezing tabs or lifting a lever.
3. Once the backrest is removed, the base can be used as a backless booster. Ensure the shoulder belt positioning clip is accessible and used correctly with the backless booster.

Instruccions de funcionament

Installing the Booster Seat in Your Vehicle

The Evenflo GoTime Sport Booster Car Seat is installed using your vehicle's lap and shoulder belt system. It does not use LATCH connectors.

1. Place the booster seat firmly on the vehicle seat. Ensure it is positioned flat against the vehicle seat back.
2. Have your child sit in the booster seat.
3. Pull the vehicle's lap and shoulder belt around your child and the booster seat.
4. Route the lap belt under the armrests of the booster seat and across your child's upper thighs, low on the hips.
5. Route the shoulder belt through the shoulder belt guide on the booster seat's headrest (for high-back mode) or use the included shoulder belt positioning clip (for backless mode). The shoulder belt should lie flat across the center of your child's shoulder and chest.
6. Buckle the vehicle's seat belt and pull the shoulder belt snug to remove any slack.

Figure 4: Proper routing of the vehicle's shoulder belt through the red belt guide on the booster seat's headrest. The belt should lie flat across the child's shoulder.

Adjusting Headrest Height

The headrest can be adjusted to 7 different positions to accommodate your child's growth.

1. Locate the height adjustment handle at the top of the headrest.
2. Squeeze the handle and simultaneously pull up or push down the headrest to the desired position.
3. Release the handle to lock the headrest in place. Ensure it is securely locked before use.

Figure 5: The headrest of the booster seat can be easily adjusted upwards or downwards to fit the child's height, indicated by the multiple positions shown.

Using the Integrated Cup Holders

The booster seat features two integrated cup holders for convenience.

Figure 6: One of the two integrated cup holders, designed to hold beverages or small snacks, shown with a snack pouch inside.

Manteniment

Instruccions de neteja

• Fabric Pad: The seat pad is removable and machine-washable. Wash on a gentle cycle with cold water and mild detergent. Tumble dry on low heat or hang to dry. Do not use bleach.
• Peces de plàstic i metall: Esborra amb anunciamp cloth and mild soap. Air dry thoroughly. Do not use abrasive cleaners or solvents.
• Sivella: Netegeu la sivella netejant-la amb anunciamp cloth. Do not lubricate the buckle.

Emmagatzematge

When not in use, store the booster seat in a cool, dry place away from direct sunlight. Do not place heavy objects on top of the booster seat during storage.

Resolució de problemes

Especificacions

Garantia i Suport

For detailed warranty information and customer support, please refer to the official Evenflo website or the documentation included with your purchase. Evenflo offers ParentLink® customer service experts who can provide live video support with certified car seat safety technicians for assistance with proper vehicle installation.

You can visit the official Evenflo weblloc per a més informació: www.evenflo.com